AS85049 AS85049/104 Composite 45° RFI/EMI Shield-Sock Adapter with Detented or Non-Detented Self-Locking Coupling Nut CONNECTOR DESIGNATOR: H Product Series and Basic Part Number MIL-DTL-38999 Series III and IV EN3645 Shell Size (Table I) M85049/104 - 11 B N N = Non-Detented Self-Locking (Omit for Detented Self-Locking) (See Note 6) EMI Shroud A Thread H F G B J 10.00 (254.0) Min K Anti-Rotation Device (See Part Number Development) Ø.125 (3.18) Drain Holes 3 Min Equally Spaced Braided Shield (See Note 5) E Braid I.D. Ref C Captivated Self-locking Telescoping Screws - Typ .25 (6.4) Max Screw Extension, Typ D (See Note 4) APPLICATION NOTES 1. For complete dimensions see the applicable Military Specification. 2. Metric dimensions (mm) are in parentheses. 3. Glenair 600 Series backshell assembly tools are recommended for assembly and installation. 4. Cable entry is measured with saddle bars closed and bottomed on clamp ears. 5. For shield/splice termination use AS85049/93 split support ring. © 2013 Glenair, Inc. 6. Detented self-locking has a positive audible detented coupling. 7. Material/Finish: Clamp body, coupling nut, saddles - High grade engineering thermoplastic/N.A. Clamp hardware - CRES/passivated, silver plated, mfg option Anti-rotation device - Corrosion resistant material Braid - Copper/nickel plated Interface ring and shroud - Brass/nickel plated Braid retention device - See Table II Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-110 E-Mail: [email protected] AS85049 AS85049/104 Composite 45° RFI/EMI Shield-Sock Adapter with Detented or Non-Detented Self-Locking Coupling Nut B TABLE I: Shell Size and Dimensions Shell Size A Thread Class 2B B Max C Max D ± .031 (0.79) See Note 4 E Min G ± .030 (0.76) F Max H Hex J Min K Max Braid I.D. Ref Screw Size 09 M12 X 1 - 6H .858 (21.79) .98 (24.89) .265 (6.73) .229 (5.82) 1.388 (35.26) .375 (9.53) .750/.736 .264 (6.71) .901 (22.89) .375 (9.53) (19.05/18.69) 4-40 11 M15 X 1 - 6H .984 (24.99) 1.05 (26.67) .310 (7.87) .274 (6.96) 1.428 (36.27) .375 (9.53) .875/.860 .390 (9.91) .964 (24.39) .375 (9.53) (22.23/21.84) 4-40 13 M18 X 1 - 6H 1.157 (29.39) 1.20 (30.48) .390 (9.91) .354 (8.99) 1.498 (38.05) .406 (10.31) 1.000/.980 .504 (12.80) 1.050 (26.67) .500 (12.70) (25.40/24.89) 6-32 15 M22 X 1 - 6H 1.280 (32.51) 1.30 (33.02) .506 (12.85) .470 (11.94) 1.548 (39.32) .406 (10.31) 1.125/1.100 .630 (16.00) 1.112 (28.24) .500 (12.70) (31.75/31.09) 6-32 17 M25 X 1 - 6H 1.406 (35.71) 1.44 (36.58) .591 (15.01) .555 (14.10) 1.648 (41.86) .406 (10.31) 1.250/1.224 .756 (19.20 1.175 (29.85) .781 (19.84) (31.75/31.09) 6-32 19 M28 X 1 - 6H 1.516 (38.51) 1.56 (39.62) .661 (16.79) .625 (15.88) 1.768 (44.91) .406 (10.31) 1.375/1.348 .843 (21.41) 1.230 (31.24) .781 (19.84) (34.93/34.24) 6-32 21 M31 X 1 - 6H 1.642 (41.71) 1.69 (42.93) .744 (18.90) .708 (17.98) 1.808 (45.92) .406 (10.31) 1.500/1.469 .969 (24.61) 1.293 (32.84) 1.000 (25.40) (38.10/37.31) 6-32 23 M34 X 1 - 6H 1.768 (44.91) 1.77 (44.96) .826 (20.98) .790 (20.07) 1.858 (47.19) .406 (10.31) 1.625/1.581 1.091 (27.71) 1.365 (34.67) 1.000 (25.40) (41.28/40.16) 6-32 25 M37 X 1 - 6H 1.890 (48.01) 1.89 (48.01) .896 (22.76) .860 (21.84) 1.898 (48.21 .406 (10.31) 1.750/1.690 1.217 (30.91) 1.417 (35.99) 1.250 (31.75) (44.45/42.93) 6-32 Table II (Manufacturer’s Option) © 2013 Glenair, Inc. Material Finish Aluminum Alloy Iridite per AMS-C-5541 Stainless Steel Passivated Copper Tin Plate Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-111 E-Mail: [email protected]