C32xx Model 5×7 mm SMD, 5V, HCMOS/TTL Frequency Range: Frequency Stability Options: Temperature Range: (standard) (Option “M”) (Option “E”*) Storage: Input Voltage: Input Current: Output: Symmetry: (Standard “2”) (Option “9”) Rise/Fall Time: Logic: Disable Time: Start-up Time: Load: Jitter RMS: 12kHz~20MHz Sub-harmonics: Aging: 1.544 MHz to 100.000 MHz ±20*, ±25, ±50, ±100 (ppm) 0°C to +70°C -20°C to +70°C -40°C to +85°C -45°C to 90°C 5.0V ±0.5V 60mA Max HCMOS/TTL 40/60% Max @ 50% Vdd 45/55% Max @ 50% Vdd 6ns Max @ 20% to 80% Vdd "0" = 10% Vdd Max "1" = 90% Vdd Min 200nSec Max 1mSec Typ., 2mSec Max 50pF/10TTL Max 0.5ps Typ, 1ps Max None <3ppm 1st/yr, <1ppm every year thereafter *available in select frequencies -40/85 Model C32xx is a 1.544 MHz to 100.000 MHz HCMOS Clock Oscillator operating at 5.0Volts. The oscillator utilizes Fundamental or High Q Third Overtone crystal design providing very low Jitter and Phase Noise. No Sub-Harmonics are present in the Output Signal. Applications: Digital Video SONET/SDH/DWDM Storage Area Networks Broadband Access Ethernet, Gigabit Ethernet CRYSTEK CORPORATION Mechanical: Shock: Vibration: Solderability: Solvent Resistance: Resistance to Soldering Heat: MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2003 MIL-STD-202, Method 215 MIL-STD-202, Method 210, Condition I or J Environmental: Thermal Shock: MIL-STD-883, Method 1011, Condition A Moisture Resistance: MIL-STD-883, Method 1004 Specifications subject to change without notice. Rev: K Date: 10-Jan-12 Page 1 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com C32xx Model 5×7 mm SMD, 5V, HCMOS/TTL 0.283 (7.20) P/N XXXX Frequency XX 0.204 (5.02) 0.071 (1.80) Denotes pad 1 XXXX=Date Code XX=Lot Code 0.055 Typ. (1.40 Typ.) SUGGESTED PAD LAYOUT #1 #2 #4 #3 0.045 ±0.008 (1.14 ±0.20) 0.200 ±0.005 (5.08 ±0.13) 0.165 (4.19) 0.071 SQ (1.80) 0.200 (5.08) 0.01uF Bypass Capacitor Recommended Dimensions inches (mm) All dimensions are Max unless otherwise specified. Tri-State Function Crystek Part Number Guide Function pin 1 Output pin Open "1" level 0.7×Vcc Min "0" level 0.3×Vcc Max Active Active High Z PIN Function 1 2 3 4 E/D GND OUT Vcc C X 3 X 9 X - 44.736 #1 #3 #4 Stability Indicator #1 Temp. Range: Blank = 0/70°C, M = -20/70°C, E = -40/85°C #2 Symmetry: 2 = 40/60%, 9 = 45/55% #3 Stability: (see Table 1) #4 Frequency in MHz: 3 or 6 decimal places Example: C3292-44.736MHz = 5.0V, 0/70°C, 40/60%, ±50ppm, 44.736MHz CM3991-44.736MHz = 5.0V, -20/70°C, 45/55%, ±25ppm, 44.736MHz CE3290-44.736MHz = 5.0V, -40/85°C, 40/60%, ±100ppm, 44.736MHz Ramp-Up 3°C/Sec Max. Critical Temperature Zone Ramp-Down 6°C/Sec. 260°C 217°C 0 2 1 8* pin 4 *available in select frequencies -40/85 Table 1 OUT pin 3 Vcc PWR Supply ±100ppm ± 50ppm ± 25ppm ± 20ppm TEST CIRCUIT mA M RECOMMENDED REFLOW SOLDERING PROFILE TEMPERATURE #2 VM Bypass Cap. OSC. E/D 200°C pin 1 O/P Load incl Probe Cl OUT GND pin 2 150°C High Impedance GND or "LOW" Preheat 180 Secs. Max. 8 Minutes Max. Oscillation OPEN or "HIGH" 90 Secs. Max. 260°C for 10 Secs. Max. NOTE: Reflow Profile with 240°C peak also acceptable. CRYSTEK CORPORATION Specifications subject to change without notice. Rev: K Date: 10-Jan-12 Page 2 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com