9020-0519 - Gamewell

7100 Series
LDM-7100
LED Driver Module
Description
The LDM-7100 LED Driver Module is used in conjunction
with the Gamewell-FCI 7100 Series Fire Alarm Control
Panel and provides output for five remote panel switches
and 33 remote LEDs, contributing to the versatility and
flexibility of the 7100 Series System.
The remote output is provided for the following switches.
• Signal Silence,
• Drill
• Alarm Acknowledge • Trouble Acknowledge
• System Reset/LED Test switches
LDM-7100
Output is also provided for the following switches.
• Alarm
• System Silenced
• Supervisory
• NAC #1 Silenced
• System Trouble
• NAC #2 Silenced LEDs
• Power Fault
Features
Installation
• 7100 control panel accommodates up to fifteen
• UL® Listed for use inside any Listed LED annunciator.
• Factory Mutual Approved for -40° F operation.
LDM-7100 modules.
The LDM-7100 LED Driver Module is intended for mounting inside a UL® Listed remote annunciator enclosure. It
may be mounted by means of mounting screws or stacked
using a metal hex standoff kit. Wire routing and installation
methods must be in accordance with the Annunciator
Installation Instructions.
• Supports a maximum of three modules per annunciator
with an output of 99 LEDs.
• May be located up to 4,000 feet (1,219 m) from the
7100 series control panel.
Specifications
Operating Voltage:
Supervisory Current:
Alarm Current:
(all LEDs lit)
Ordering Information
24 VDC resettable
.035 amp.
.200 amp. max (All LEDs and
optional sounder energizer).
Part Number
Description
LDM-7100
Remote LED Driver Module
UL Listed Temperature
Range:
32° to 120° F (0° to 49° C)
Relative Humidity:
85% max., non-condensing at
90° F (32° C)
SIGNALING
FM
UL® is a registered trademark of Underwriter’s Laboratories Inc.
E3 Series® is a registered trademark of Honeywell International Inc.
S1949
MEA
Approved
FDNY
APPROVED
3014896 COA # 255-05-E 7300-1703-0111
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
www.gamewell-fci.com
9020-0519 Rev. G page 1 of 1
©2013 by Honeywell International Inc. All rights reserved.