PTR-2 Dot Matrix Printer Description The Gamewell-FCI, Model PTR-2 narrow carriage, 9-pin dot matrix printer is designed to function with the various Gamewell-FCI fire alarm control panels. This printer will furnish a printed record of all events occurring in the system. Small and compact, the PTR-2 printer is the ideal supplement to a GamewellFCI fire alarm system. Installation The PTR-2 is simple to install. The unit must be plugged into a local 120 VAC power source. A factory-furnished cable is plugged into the printer and the other end of the cable is plugged into the printer port of the Gamewell-FCI fire alarm control panel. • Note: The PTR-2 operates on 120 VAC only. For operation during a power failure, it is recommended that you use an uninterruptible power supply (UPS). PTR-2 Features • Supervised operation • High speed printing • Compact Design • Correspondence quality print Specifications • Simple installation Input: Power: • Reduced noise level • Ergonomic design Paper Type Max. Media Size: Media Type: A4 (8.25 in x 11.7 in.) Continuous forms, perforated plain paper, plain paper 120 VAC, 60 Hz 90 watts (Operational) 10 watts (Stand By) RS-232C I/F Type: Baud Rate: 7100: 9,600 bits/second 7200: 1,200 bits/second Operating 50° to 95° F (10° to 35° C) Temperature: Relative Humidity: 20 - 80% Dimensions: 7.8" H x 16.8" W x8.5"D (19.8 H x 42.7 W x 21.6 D cm) Weight: 10.8 lbs. (4.9 kg) Ordering Information Part Number Description PTR-2 Dot Matrix Printer ® E3 Series is a registered trademark of Honeywell International Inc. ® Microsoft is a registered trademark of Microsoft Corporation. GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. www.gamewell-fci.com 9020-0550 Rev. B1 page 1 of 1 ©2009 by Honeywell International Inc. All rights reserved.