Model 3663 Pedal Pressure Load Cell DESCRIPTION The pedal pressure sensor mounts directly to the brake pedal force measurements by the automotive industry, finds many with its own mounting clamp. Load applied up to 1/2 inch off production applications. It adapts to any of the pedal or bar center, produces less than a 0.5% error. Standard capacity operated devices used in all production facilities. is 300 lbs. This load cell, which is used for brake pedal FEATURES • 50 lb, 100 lb, 200 lb, and 300 lb load capacity • Low off-center loading error • Easy mounting • Rugged load surface • Integral cable • Compact size Model 3663 PERFORMANCE SPECIFICATIONS RANGE CODES Characteristic Measure Range Codes Range Load range 50, 100, 200, 300 lb BN 50 lb Non-linearity ±0.25 % of rated output BR 100 lb Hysteresis ±0.1 % of rated output CL 200 lb Repeatability ±0.1 % of rated output CP 300 lb Output @ rated capacity 2 mV/V (nominal) Operation Tension/compression Resolution Infinite Standard calibration Tension (+) and compression (-) MOUNTING DIMENSIONS 1 3/32 2.0 DIA. ENVIRONMENTAL SPECIFICATIONS Characteristic Measure Temperature, operating -54 °C to 93 °C [-65 °F to 200 °F] Temperature, compensated 21 °C to 77 °C [70 °F to 170 °F] Temperature effect, zero ±0.003 % of rated output/°F Temperature effect, output ±0.003 % of reading/°F ELECTRICAL SPECIFICATIONS Characteristic Measure Strain gage type Foil Excitation (maximum) 20 Vdc or Vac RMS Insulation resistance > 5000 mOhm @ 50 Vdc Bridge resistance (tolerance) 350 ohm Zero balance ±2.0 % Electrical termination PT06W-12-10P 1 5/8 BRAKE PEDAL PAD TWO ADJUSTABLE CLAMPS FURNISHED 4 CONDUCTOR CABLE-8 FT. RECEP. PT06W-12-10P TYPICAL SYSTEM DIAGRAM Output Amplifier Universal In-Line Amplifiers +/-5 VDC UV +/-10 VDC UV-10 0 +/-5 VDC UBP 4-20mA (3 wire) U3W 4-20mA (2 wire) U2W DIN rail Mount In-Line Amplifiers 0 +/- 5 VDC (3 wire) DV-05 4-20mA (3 wire) DA-05 0 +/- 10 VDC (3 wire) DV10 Measure Static overload capacity 150 % of nominal capacity Safe overload rating 150 % of nominal capacity Power Supply Honeywell MECHANICAL SPECIFICATIONS Characteristic Customer Supplied Chart Recorder Alarm Panel Data Acquisition Computer PLC In-Line Amplifiers (Used with unamplified units only) In-Line Amplifier Output Input Serial Number Display Units MODEL 3663 SC500 SC2001 GM 7541 SC1000 SC3004 NK 7558 SC2000 HH 7561-PSD 2003.1 lb. L1 L2 L3 L4 VALUE CLEAR UP DOWN SETUP Mating Connectors & Cables 023-LW181-023-LF Mating Connector 7220-109-XX** Mating connector & 4 conductor cable ** XX represents length in feet 2 Honeywell • Sensing and Control 20ft maximum CHAN TARE ENTER EXIT Model 3663 Pedal Pressure Load Cell Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847 Email inquiries to [email protected] WARNING PERSONAL INJURY •DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION •The information presented in this catalogue is for reference only. DO NOT USE this document as product installation information. •Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Automation and Control Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA +1-815-235-6847 www.honeywell.com/sensing 008676-1-EN IL50 GLO May 2008 Copyright © 2008 Honeywell International Inc. All rights reserved.