Model MAQ36 Accelerometer DESCRIPTION The Model MAQ36 charge output miniature accelerometer is de- temperature environment. The Model MAQ36 features a wide signed to be used in Industrial test and automation environments frequency range, and a flat sensitivity vs. temperature response including laboratory testing, modal studies and test cells where over the temperature range. The seismic element is mechani- high temperatures are likely to be encountered and where space cally isolated from the mounting base, resulting in a low base is limited and small size is desired or a high natural frequency is strain sensitivity. The stainless steel materials are non-magnetic required. The MAQ36 is a self generating piezoelectric trans- resulting in very low magnetic field susceptibility. These features, ducer which has no internal electronics and requires no external together with a sealed body, assure accurate and reliable data. power for operation. These units are usually connected to a local charge amplifier that is mounted as near as possible in a lower FEATURES • Sub-miniature • Charge output (pC/G) • 45 kHz mounted frequency • Low sensitivity • Side entry with microdot connector Model MAQ36 PERFORMANCE SPECIFICATIONS WIRING CODES Characteristic Measure Wire Dynamic range ±2000 G Center (+) Output Sensitivity 5 pC/G ±10 % Shield Case ground Transverse sensitivity Less than 5 % Temperature sensitivity 0.045/°F Frequency range 1 Hz to 30 kHz Amplitude linearity Better than 1 % linearity Mounted base resonance 45 kHz ENVIRONMENTAL SPECIFICATIONS Characteristic Measure Temperature, operating -57 °C to 249 °C [-70 °F to 480 °F] Sealing IP67/NEMA 4 ELECTRICAL SPECIFICATIONS Characteristic Measure Input Self generating Output Charge Charge amplitude required CA2 Mating connector Microdot Capacitance 300 pF Isolation Base isolated MECHANICAL SPECIFICATIONS Characteristic Measure Weight 0,007 kg [0.25 oz] Material Stainless steel Mounting torque 2 ft-lb SENSITIVITY CODES Sensitivity Code Sensitivity YA 0.5 pC/G YB 5 pC/G YF 50 pC/G 2 Honeywell • Sensing and Control OPTION CODES Many range/option combinations are available in our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/ TMsensor-ship for updated listings. Sensitivity 0.5 pC/G, 5 pC/G , 50 pC/G MOUNTING DIMENSIONS Model MAQ36 Accelerometer TYPICAL SYSTEM DIAGRAM Standard, as shown Glued mounting Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847 Email inquiries to [email protected] WARNING PERSONAL INJURY •DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION •The information presented in this catalogue is for reference only. DO NOT USE this document as product installation information. •Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Automation and Control Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA +1-815-235-6847 www.honeywell.com/sensing 008726-1-EN IL50 GLO May 2008 Copyright © 2008 Honeywell International Inc. All rights reserved.