Designed and Manufactured in Germany Specification Oscillator type: Rev.: 3 Date: 2014-05-08 AXIOM5151 OCXO with Ultra-Low Phase Noise Floor of -180 dBc/Hz Parameter Frequency range Standard frequencies Frequency stability Initial tolerance @ +25°C vs. operating temperature range vs. supply voltage variation (pushing) Long term (aging) per day st Long term (aging) 1 year Frequency adjustment range Electronic Frequency Control (EFC) EFC voltage VC EFC slope (∆f / ∆VC) EFC input impedance RF output Signal waveform Load RL Output level Harmonics Spurious Warm-up time @ +25°C G-Sensitivity Phase Noise Noise floor Supply voltage VS (Note 3) Current consumption (steady state) Current consumption (warm-up) Operating temperature range (Note 2) min. 80 max. Unit 125 100.000/120.000 MHz MHz ±300 ±200 ±2 ±200 ppb ppb ppb ppb ppb 10.0 ppm V ±20 ±1 0 ±2 5.0 Positive 100 Condition @ VC = 5.0 V steady state (Note 2) VS ±5% after 30 days operation after 30 days operation kΩ Sine wave 50 +16 +14 -40 -110 5 1.0 See table 1 11.4 -180 12.6 275 475 +60 12.0 -10 Enclosure (see drawing) (LxWxH) Weight Packing Notes: 1. 2. 3. typ. 51x51x19 max. Ω dBm dBc dBc min ppb/g @ VC = 5.0 V ∆ffinal/f0 < ±0.2 ppm per axis Option 1 dBc/Hz @ ≥ 100 kHz V mA @ +25°C mA °C mm g 85 Palette Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated Other stability and temperature range on request Other supply voltages on request Absolute Maximum Ratings Parameter min. max. Supply Voltage VS Control Voltage VC Storage Temperature -0.5 -0.5 -55 VS + 10% 15 +125 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIOM5151 Rev.3 Drawing D0 Page 1(4) Unit Condition V V °C VS to GND VC to GND www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Phase Noise – Option 1: Offset A -90 -125 -155 -175 -180 10 Hz 100 Hz 1 kHz 10 kHz ≥100 kHz Table 1 B -95 -130 -158 -176 -180 100 MHz C -97 -132 -160 -176 -180 D -100 -135 -162 -176 -180 E -105 -137 -164 -178 -180 A -85 -118 -148 -160 -180 B -90 -122 -150 -165 -180 120 MHz C -95 -125 -153 -168 -180 D -97 -127 -155 -171 -180 E -100 -130 -157 -175 -180 Unit dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz Ordering Code Option 1 Revision Frequency [MHz] [Phase noise] AXIOM5151 Table 1 Rev.3 100.000 Example: AXIOM5151-C_Rev.3 – 100.000 MHz Model Handling and Testing Parameter Handling and Testing Processing Parameter Electrostatic discharge (ESD) THD devices SMD devices Washable RoHS- Compliant GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Procedure Application Note AXAN-011 Application Note AXAN-012 Procedure IEC60749-26 IEC60749-27 Yes Yes AXIOM5151 Rev.3 Drawing D0 Page 2(4) HBM MM No No Source www.axtal.com www.axtal.com Condition 2000 V 200 V www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Enclosure drawing Pin connections: Pin # Symbol 1 VS 2 N.C. 3 GND 4 VC SMA RF OUT Function Supply Voltage No Connection Ground Control Voltage (EFC) RF Output * See Application Note AXAN-011 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIOM5151 Rev.3 Drawing D0 Page 3(4) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part … 2-17 IEC 60679-1 Clause 5.6.2 MIL-STD202G Method 112E 2-20 2-58 5.6.3 208H 210F 2-27 5.6.8 213B Vibration, 2-6 5.6.7.1 201A sinusoidal* 204D Vibration, 2-64 5.6.7.3 214A random* Endurance tests 108A - ageing 5.7.1 - extended aging 5.7.2 Other environmental conditions on request MIL-STD810F Method MIL-PRF55310D Clause 3.6.1.2 3.6.52 3.6.48 516.4 3.6.40 516.4-4 3.6.38.1 3.6.38.2 3.6.38.3 3.6.38.4 514.5 4.8.35 Test conditions (IEC) Gross leak: Test Qc, Fine leak: Test Qk Test Ta Method 1 Test Td1 Method 2 Test Td2 Method 2 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Fdb 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. Revision History Rev. Drawing Date [dd.mm.yyyy] 2 3 D1 D0 01.10.2012 08.05.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks Editorial changes Various parameters updated, G-Sensitivity added, environmental conditions updated, editorial changes AXIOM5151 Rev.3 Drawing D0 Page 4(4) Author Checked BN HH BN HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]