Designed and Manufactured in Germany Specification Oscillator type: Rev.: 10 AXIS30 SMD Wide-pull VCXO in CO27 package Date: 2014-04-05 SMD replacement for Fujitsu M2 (F100) Parameter min. max. Unit Frequency range Standard frequencies 10 30 12.288 / 16.384 / 22.579 / 24.576 / 27.000 / 28.224 MHz MHz Frequency stability vs. operating temperature range vs. supply voltage variation vs. load change st Long term (aging) 1 year Long term (aging) following years Frequency adjustment range Electronic Frequency Control (EFC) (Note 3) EFC voltage VC (Note 3) EFC slope (∆f / ∆VC) EFC input impedance RF output Signal waveform Load Rise & decay time Symmetry (duty cycle) Start-up time Supply voltage VS Current consumption (steady state) Operating temperature range Enclosure (see drawing) Weight Packing Notes: 1. 2. 3. typ. ±80 ±10 ±5 ±10 ±5 ±500 ±500 ±1000 ±1500 ±2000 ±2500 ±3000 ±4000 0.15 0.25 ±1100 ±1600 ±2100 ±2600 ±3200 3.15 4.75 Condition ppm ppm ppm ppm ppm ppm (Note 2) VS ±5% Load ±5% @ 40°C @ 40°C ppm ppm ppm ppm ppm ppm ppm ppm V V Option 2 = “ ” Option 2 = “500” Option 2 = “1000” Option 2 = “1500” Option 2 = “2000” Option 2 = “2500” Option 2 = “3000” Option 2 = “4000” Option 1 = “33“ Option 1 = “50” Positive 100 kΩ HCMOS 15 10 60 4 3.45 5.25 40 +70 40 3.15 4.75 3.3 5.0 -20 14.4x9.5x6.0 max. pF ns % ms V V mA °C mm g 2 Tape & Reel @ VS/2 Option 1 = “33“ Option 1 = “50” @ +25°C (Note 2) IEC 61837 CO 27 IEC 60286-3 Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated nd Frequency vs. temperature response is a 2 order parabola with turn-over point at ≈ +20°C to +30°C Tuning range Option 2 = “1500” or higher is only possible with EFC voltage 0.25V ~ 4.75 V Absolute Maximum Ratings Parameter min. max. Supply Voltage VS Control Voltage VC Storage Temperature -0.5 -0.5 -55 VS + 10% 15 +125 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIS30 Rev.10 Drawing D0 Page 1(3) Unit Condition V V °C VS to GND VC to GND www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Ordering Code Option 1 Option 2 [Supply Voltage] [Tuning Range] AXIS30 50 2000 Example: AXIS30-50-2000_Rev.10 – 28.224 MHz Model Revision Frequency [MHz] Rev.10 28.224 Enclosure drawing Pin connections Pin # 1 2 3 4 5 6 Symbol VC N.C. GND RF OUT N.C. Vs Function Control Voltage (EFC) No Connection Ground RF Output No Connection Supply Voltage Handling and Testing Parameter Procedure Handling and Testing Processing Parameter Application Note AXAN-011 Application Note AXAN-012 Procedure Electrostatic discharge (ESD) THD devices SMD devices Washable RoHS compliant GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany IEC60749-26 IEC60749-27 Yes Yes AXIS30 Rev.10 Drawing D0 Page 2(3) HBM MM No No Source www.axtal.com www.axtal.com Condition 2000 V 200 V www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part … 2-17 IEC 60679-1 Clause 5.6.2 MIL-STD202G Method 112E 2-20 2-58 5.6.3 208H 210F 2-27 5.6.8 213B Vibration, 2-6 5.6.7.1 201A sinusoidal* 204D Vibration, 2-64 5.6.7.3 214A random* Endurance tests 108A - ageing 5.7.1 - extended aging 5.7.2 Other environmental conditions on request MIL-STD810F Method MIL-PRF55310D Clause 3.6.1.2 3.6.52 3.6.48 516.4 3.6.40 516.4-4 3.6.38.1 3.6.38.2 3.6.38.3 3.6.38.4 514.5 4.8.35 Test conditions (IEC) Gross leak: Test Qc, Fine leak: Test Qk Test Ta Method 1 Test Td1 Method 2 Test Td2 Method 2 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Fdb 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. Revision History Rev. Drawing Date [dd.mm.yyyy] 9 10 D1 D0 01.10.2012 05.04.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks Editorial changes Frequency range changed, tuning range extended, Environmental conditions updated, editorial changes AXIS30 Rev.10 Drawing D0 Page 3(3) Author Checked BN HH BN HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]