Designed and Manufactured in Germany Specification Oscillator type: Rev.: 1 Date: 2014-04-05 AXIS80 Wide-pull VHF/UHF VCXO with High Linearity in connectorized package Parameter Frequency range Frequency stability Initial tolerance vs. operating temperature vs. supply voltage variation vs. load change Long term (aging) per year Frequency adjustment range Electronic Frequency Control (EFC) EFC voltage VC EFC slope (∆f / ∆VC) EFC non-linearity EFC input impedance RF output Signal waveform Load Output level Harmonics Sub-harmonics Spurious Phase noise @ 360 MHz Supply voltage VS Current consumption Warm-up time @ 25°C Operating temperature range min. 90 ±10 max. Unit 400 ±200 ±20 ±10 ±10 ±5 MHz ppm ppm ppm ppm ppm ppm +5 ppm V ±1000 -5 Condition (Note 2) VS ±5% RL ±10% (Note 3) Negative ±5 % kΩ 100 +10 Sine wave 50 +13 -45 14.25 -95 15.0 0 Enclosure (see drawing) (LxWxH) Weight Packing Notes: 1. 2. 3. 4. 5. typ. -30 -40 -80 -90 15.75 120 2 +50 54x40x19 Ω dBm dBc dBc dBc dBc/Hz V mA min °C mm g 60 ±10 % (Note 4) @ 1 KHz @ 25°C (Note 5) (Note 2) h = 2.0 mm Palette Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated Other stabilities over temperature on request Other tuning characteristics on request Multiplication factor depends on frequency. Please consult factory Oscillator is fully compliant after specified warm-up time Absolute Maximum Ratings Parameter min. max. Supply Voltage VS Control Voltage VC Storage Temperature -0.5 -10 -55 VS + 10% +10 +125 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIS80 Rev.1 Drawing D0 Page 1(3) Unit Condition V V °C VS to GND VC to GND www.axtal.com fon: +49 (6261)939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Ordering Code Model Revision Frequency [MHz] AXIS80 Rev.1 360.000 Example: AXIS80_Rev.1 – 360.000 MHz Enclosure drawing Pin connections Pin# Symbol 1 VC 2 GND 3 VS SMA RF OUT Function Control Voltage (EFC) Ground Supply Voltage RF Output Handling and Testing Parameter Procedure Handling and Testing Processing Parameter Source Application Note AXAN-011 Application Note AXAN-012 Procedure Electrostatic discharge (ESD) THD devices SMD devices Washable RoHS compliant GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany IEC60749-26 IEC60749-27 Yes Yes AXIS80 Rev.1 Drawing D0 Page 2(3) www.axtal.com www.axtal.com Condition HBM MM 2000 V 200 V No No www.axtal.com fon: +49 (6261)939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part … 2-17 IEC 60679-1 Clause 5.6.2 MIL-STD202G Method 112E 2-20 2-58 5.6.3 208H 210F 2-27 5.6.8 213B Vibration, 2-6 5.6.7.1 201A sinusoidal* 204D Vibration, 2-64 5.6.7.3 214A random* Endurance tests 108A - ageing 5.7.1 - extended aging 5.7.2 Other environmental conditions on request MIL-STD810F Method MIL-PRF55310D Clause 3.6.1.2 3.6.52 3.6.48 516.4 3.6.40 516.4-4 3.6.38.1 3.6.38.2 3.6.38.3 3.6.38.4 514.5 4.8.35 Test conditions (IEC) Gross leak: Test Qc, Fine leak: Test Qk Test Ta Method 1 Test Td1 Method 2 Test Td2 Method 2 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Fdb 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. Revision History Rev. Drawing Date [dd.mm.yyyy] Remarks Author Checked 1 D0 05.04.2014 First issue HH HH GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIS80 Rev.1 Drawing D0 Page 3(3) www.axtal.com fon: +49 (6261)939834 fax: +49 (6261) 939836 E-mail: [email protected]