Top View Features Direclty mates with a comapatoble SMT adapter. Minimum real estate required A Compression plate distributes evenly 49.225mm [1.938"] Clamshell lid A 8 Materials: 42.60mm [1.677"] Side View (Section AA) 4 Assembled 38mm + IC thickness 1 1 Clam Shell Lid: Nicke Plated Aluminum. Height = 20 mm. 2 Socket Base: Nickel Plated Aluminum. Height = 6 mm. 3 Compression Plate: Nickel Plated Aluminum. Thickness = 12 mm. 4 Compression Screw: Nickel Plated Aluminum. Height = 27 mm, Fluted Knob 5 Stamped Pin: Stamped Contact: BeCu, Au Plate Spring SS, Au Plate 6 Pogo Pin Guides: Peek 7 Pogo Pin Guide Screw: Pan head phillips, 18-8 SS, 0-80 thread, 3/16" long. 8 Latch: Nickel Plated Aluminum. 3 2 6 6.52mm 5 7 32.600mm [1.283"] CBT-BGA-6007 Drawing © 2010 IRONWOOD ELECTRONICS, INC. Tele: (800) 404-0204 www.ironwoodelectronics.com Status: Released Scale: 3:1 Rev: A Drawing: Sri Natarajan Date: 12/18/2012 File: CBT-BGA-6007 Dwg Modified: Recommended PCB Layout Tolerances: ±0.025mm [±0.001”] unless stated otherwise. PAGE 1 of 3 Compatible BGA Spec DETAIL D X Y A1 DETAIL A 5 0.35 Z 5 0.25 Z E Z A1 0.15 Z 4 0.20 TOP VIEW SIDE VIEW BOTTOM VIEW e 1. 3 Øb DIM Dimensions are in millimeters. 2. Interpret dimensions and toleraces per ASME Y14.5M-1994. 3 Dimension b is measured at the maximum solder ball diameter, parallel to datum plame Z. 4 Datum Z (seating plane) is defined by the spherical crowns of the solder balls. 5 Parallelism measurement shall exclude any effect of mark on top surface of package. MIN MAX 2.33 A A1 0.5 0.3 b 0.60 D 27.00 BSC E 27.00 BSC e 1.0 BSC Ø0.25 Z X Y Ø0.10 26x26 Array A 1 BOTTOM VIEW CBT-BGA-6007 Drawing © 2010 IRONWOOD ELECTRONICS, INC. Tele: (800) 404-0204 www.ironwoodelectronics.com Status: Released Scale: - Rev: A Drawing: Sri Natarajan Date: 12/18/2012 File: CBT-BGA-6007 Dwg Modified: PAGE 2 of 3 Top View of Socket Base Pin A1 mark 13.72mm [0.540"] 9.11mm [0.359"] 8.50mm [0.335"] 22.00mm [0.866"] 30.09mm [1.185"] 39.00mm [1.535"] CBT-BGA-6007 Drawing © 2010 IRONWOOD ELECTRONICS, INC. Tele: (800) 404-0204 www.ironwoodelectronics.com Status: Released Scale: 3:1 Rev: A Drawing: Sri Natarajan Date: 12/18/2012 File: CBT-BGA-6007 Dwg Modified: All dimensions are in mm. All tolerences are +/- 0.125mm. (Unless stated otherwise) PAGE 3 of 3