4.0X0.8mm RIGHT ANGLE SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APJKA4008RWC/A ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES WHITE Description The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. Features z4.0mmx0.8mm RIGHT ANGLE SMT LED, 1.4mm THICKNESS. zLOW POWER CONSUMPTION. All devices, equipment and machinery must be electrically grounded. z WIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. Applications zPACKAGE : 2000PCS / REEL. zMOISTURE SENSITIVITY LEVEL : LEVEL 4. z backlighting (illuminated advertising , general lighting). z interior and exterior automotive lighting. zELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. zTYP. COLOR TEMPERATURE:6500K zCOLOR COORDINATES:X=0.33,Y=0.34 ACC. TO CIE1931(WHITE). zOPTICAL EFFICIENCY:10.5 lm/W(TYP.) zCOLOR REPRODUCTION INDEX:80 zRoHS COMPLIANT. z traffic signaling. z substitution of micro incandescent lamps. z reading lamps. z signal and symbol luminaire for orientation. z marker lights (e.g. steps, exit ways, etc). z decorative and entertainment lighting. z indoor and outdoor commercial and residential architectural lighting. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAG3649 REV NO: V.4 DATE: MAY/23/2006 PAGE: 1 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1204000755 Selection Guide -v (mlm) @ 20 mA Note2 Part No. Dice APJKA4008RWC/A Lens Type WHITE (InGaN) Note3 luminous Intensity Iv(mcd) @ 20 mA Viewing Note1 Angle Min. Typ. Typ. 2θ1/2 70 180 700 90° WATER CLEAR Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 114 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C IF 30 mA IFM 100 mA Rth JA Rth JS 400 160 °C/W °C/W DC Forward Current Peak Forward Current Note4 Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size≥16 mm 2 per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Value Unit Note1 0.33 - Note1 0.34 - Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage 2.7 VF Note2 IF=20mA [Max.] Reverse Current (VR=5V) 3.3 3.8 [Typ.] 0.01 IR Reverse Current (VR=5V) V [Max.] 10 µA Temperature coefficient of x IF=20mA, -10°CT100°C [Typ.] TC x -0.1 10-3 / °C Temperature coefficient of y IF=20mA, -10°CT100°C [Typ.] TCy -0.2 10-3 / °C Temperature coefficient of VF IF=20mA, -10°CT100°C [Typ.] TCV -2.5 mV/ °C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAG3649 REV NO: V.4 DATE: MAY/23/2006 PAGE: 2 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1204000755 Brightness codes -v(mlm) @ 20 mA Note1 Note2 luminous Intensity Iv(mcd) @ 20 mA Code. Min. Max. Typ. M 70 130 300 N 110 220 480 P 180 320 710 Q 280 420 960 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White APJKA4008RWC/A SPEC NO: DSAG3649 REV NO: V.4 DATE: MAY/23/2006 PAGE: 3 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1204000755 APJKA4008RWC/A SPEC NO: DSAG3649 REV NO: V.4 DATE: MAY/23/2006 PAGE: 4 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1204000755 Color Codes SPEC NO: DSAG3649 REV NO: V.4 DATE: MAY/23/2006 PAGE: 5 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1204000755 APJKA4008RWC/A Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAG3649 REV NO: V.4 DATE: MAY/23/2006 PAGE: 6 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1204000755 PACKING & LABEL SPECIFCATIONS APJKA4008RWC/A SPEC NO: DSAG3649 REV NO: V.4 DATE: MAY/23/2006 PAGE: 7 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1204000755