4.0X0.8mm RIGHT ANGLE SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APJKA4008RWC/A ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES WHITE Description The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. Features z4.0mmx0.8mm RIGHT ANGLE SMT LED, 1.4mm THICKNESS. zLOW POWER CONSUMPTION. All devices, equipment and machinery must be electrically grounded. z WIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR. Applications zVARIOUS COLORS AND LENS TYPES AVAILABLE. z traffic signaling. zPACKAGE : 2000PCS / REEL. z backlighting (illuminated advertising , general lighting). zMOISTURE SENSITIVITY LEVEL : LEVEL 4. z interior and exterior automotive lighting. zELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. z substitution of micro incandescent lamps. zTYP. COLOR TEMPERATURE:6500K z reading lamps. zCOLOR COORDINATES:X=0.31,Y=0.31 ACC. TO z signal and symbol luminaire for orientation. z marker lights (e.g. steps, exit ways, etc). CIE1931(WHITE). zOPTICAL EFFICIENCY:10.5 lm/W(TYP.) z decorative and entertainment lighting. zCOLOR REPRODUCTION INDEX:80 z indoor and outdoor commercial and residential zRoHS COMPLIANT. architectural lighting. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG3649 REV NO: V.5 DATE: JUN/29/2007 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1204000755 Selection Guide Note2 Dice Part No. APJKA4008RWC/A Lens Type WHITE (InGaN) Note3 luminous Intensity Iv(mcd) @ 20 mA Φv (mlm) @ 20 mA Viewing Note1 Angle Min. Typ. Typ. 2θ1/2 70 180 700 90° WATER CLEAR Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 114 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C IF 30 mA IFM 100 mA Rth JA Rth JS 400 160 °C/W °C/W DC Forward Current Peak Forward Current Note4 Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size≥16 mm 2 per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Note1 Note1 Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage Unit 0.31 - 0.31 - 2.7 VF Note2 IF=20mA [Max.] Reverse Current (VR=5V) Value 3.3 3.8 [Typ.] 0.01 IR Reverse Current (VR=5V) V [Max.] μA 10 Temperature coefficient of x IF=20mA, -10°C≤ T≤100°C [Typ.] TC x -0.1 10-3 / °C Temperature coefficient of y IF=20mA, -10°C≤ T≤100°C [Typ.] TCy -0.2 10-3 / °C Temperature coefficient of VF IF=20mA, -10°C≤ T≤100°C [Typ.] TCV -2.5 mV/ °C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAG3649 REV NO: V.5 DATE: JUN/29/2007 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1204000755 Brightness codes Note1 Note2 luminous Intensity Iv(mcd) @ 20 mA Φv(mlm) @ 20 mA Code. Min. Max. Typ. M 70 130 300 N 110 220 480 P 180 320 710 Q 280 420 960 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White APJKA4008RWC/A SPEC NO: DSAG3649 REV NO: V.5 DATE: JUN/29/2007 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1204000755 APJKA4008RWC/A SPEC NO: DSAG3649 REV NO: V.5 DATE: JUN/29/2007 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1204000755 Color Codes White CIE 0.44 0.43 0.42 0.41 0.40 0.39 c1 0.38 0.37 0.36 c0 b4 0.35 0.34 0.33 b1 b3 0.32 0.31 b2 0.30 0.29 a1 0.28 a0 0.27 0.26 0.25 0.24 0.23 0.22 0.21 0.22 0.23 0.24 0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 a0 a1 b1 X 0.264 0.283 0.296 0.280 X 0.248 0.275 0.283 0.264 X 0.283 0.330 0.330 0.287 Y 0.267 0.305 0.276 0.248 Y 0.286 0.321 0.305 0.267 Y 0.305 0.360 0.339 0.295 Reference CCT: 14000~9000k Reference CCT: 14000~9000k Reference CCT: 9000~5600k b2 b3 b4 X 0.287 0.330 0.330 0.296 X 0.275 0.298 0.306 0.283 X 0.298 0.321 0.330 0.306 Y 0.295 0.339 0.318 0.276 Y 0.321 0.350 0.332 0.305 Y 0.350 0.379 0.360 0.332 Reference CCT: 9000~5600k Reference CCT: 9000~7000k c0 c1 X 0.330 0.361 0.356 0.330 X 0.321 0.366 0.361 0.330 Y 0.360 0.385 0.351 0.318 Y 0.379 0.419 0.385 0.360 Reference CCT: 5600~4600k Reference CCT: 7600~5600k Reference CCT: 6000~4600k SPEC NO: DSAG3649 REV NO: V.5 DATE: JUN/29/2007 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1204000755 APJKA4008RWC/A Recommended Soldering Pattern (Units: mm; Tolerance: ±0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAG3649 REV NO: V.5 DATE: JUN/29/2007 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1204000755 PACKING & LABEL SPECIFCATIONS APJKA4008RWC/A SPEC NO: DSAG3649 REV NO: V.5 DATE: JUN/29/2007 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1204000755