T-1 3/4 (5mm) SOLID STATE LAMP PRELIMINARY SPEC Part Number: WP7114RWC/A WHITE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic Features glove when handling the LEDs. LOW POWER CONSUMPTION. All devices, equipment and machinery must be electrically POPULAR T-1 3/4 DIAMETER PACKAGE. grounded. GENERAL PURPOSE LEADS. RELIABLE AND RUGGED. LONG LIFE - SOLID STATE RELIABILITY. Applications AVAILABLE ON TAPE AND REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 1. Marker lights ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. Furniture lighting TYP. COLOR TEMPERATURE:6500K. Outdoor displays COLOR COORDINATES:X=0.33,Y=0.34 ACC. TO Optical indicators CIE1931(WHITE). Signal and symbol luminaire OPTICAL EFFICIENCY:6 lm/W(TYP.) Marker lights (e.g. steps, exit ways, etc.) COLOR REPRODUCTION INDEX:80. Lighting for special effects (e.g. starry sky) RoHS COMPLIANT. Substitute for miniature flashlight Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAG2583 REV NO: V.3 DATE: MAY/22/2006 PAGE: 1 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101015417 Selection Guide Note2 Part No. Dice WP7114RWC/A WHITE (InGaN) Note3 luminous Intensity Iv(mcd) @ 20mA Lens Type WATER CLEAR v (mlm) @ 20mA Viewing Note1 Angle Min. Typ. Typ. 2θ θ1/2 480 1200 400 20° Absolute Maximum Ratings at TA=25°C Symbol Value Unit Power dissipation Parameter Pt 114 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C IF 30 mA IFM 100 mA Rth JA Rth JS 350 130 °C/W °C/W DC Forward Current Peak Forward Current Note4 Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size ≥16 mm2 per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Value Unit Note1 0.33 - Note1 0.34 - Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage 2.7 VF Note2 IF=20mA [Max.] Reverse Current (VR=5V) 3.3 3.8 [Typ.] 0.01 IR Reverse Current (VR=5V) V [Max.] 10 µA Temperature coefficient of x [Typ.] IF=20mA, -10°C T 100°C TC x -0.1 10-3 / °C Temperature coefficient of y [Typ.] IF=20mA, -10°C T 100°C TCy -0.2 10-3 / °C Temperature coefficient of VF IF=20mA, -10°C T 100°C [Typ.] TCV -2.5 mV/ °C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ± 0.1V. SPEC NO: DSAG2583 REV NO: V.3 DATE: MAY/22/2006 PAGE: 2 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101015417 Brightness codes Note1 Note2 luminous Intensity Iv(mcd) @ 20mA Code. Min. S T v (mlm) @ 20mA Max. Typ. 480 750 200 650 1100 300 U 900 1500 400 V 1200 1800 500 W 1500 2100 600 X 1800 2500 750 Y 2200 3000 900 Z 2500 3300 1000 ZA 2800 3800 1200 ZB 3300 4500 1400 ZC 3800 5500 1600 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White WP7114RWC/A SPEC NO: DSAG2583 REV NO: V.3 DATE: MAY/22/2006 PAGE: 3 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101015417 White WP7114RWC/A SPEC NO: DSAG2583 REV NO: V.3 DATE: MAY/22/2006 PAGE: 4 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101015417 Color Codes WP7114RWC/A SPEC NO: DSAG2583 REV NO: V.3 DATE: MAY/22/2006 PAGE: 5 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101015417 WP7114RWC/A Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) SPEC NO: DSAG2583 REV NO: V.3 DATE: MAY/22/2006 PAGE: 6 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101015417 PACKING & LABEL SPECIFICATIONS WP7114RWC/A SPEC NO: DSAG2583 REV NO: V.3 DATE: MAY/22/2006 PAGE: 7 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101015417