1.0x0.5mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APHH1005RWF/A WHITE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description The source color devices are made with InGaN on SiC Light Emitting Diode. Features Static electricity and surge damage the LEDS. 1.0mmx0.5mm SMT LED, 0.7mm THICKNESS. It is recommended to use a wrist band or anti-electrostatic LOW POWER CONSUMPTION. glove when handling the LEDs. WIDE VIEWING ANGLE. All devices, equipment and machinery must be electrically IDEAL FOR BACKLIGHT AND INDICATOR. grounded. MOISTURE SENSITIVITY LEVEL : LEVEL 3. PACKAGE: 2000PCS / REEL . ELECTROSTATIC DISCHARGE THRESHOLD Applications (HBM):1000V. TYP. COLOR TEMPERATURE:6500K traffic signaling. COLOR COORDINATES:X=0.33,Y=0.34 ACC. TO backlighting (illuminated advertising , general lighting). CIE1931(WHITE). interior and exterior automotive lighting. OPTICAL EFFICIENCY: 12.9 lm/W(TYP.) substitution of micro incandescent lamps. COLOR REPRODUCTION INDEX:80 reading lamps. RoHS COMPLIANT. signal and symbol luminaire for orientation. marker lights (e.g. steps, exit ways, etc). decorative and entertainment lighting. indoor and outdoor commercial and residential Package Dimensions architectural lighting. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAG6504 REV NO: V.1 DATE:JUL/15/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:Y.L.LI PAGE: 1 OF 7 ERP: 1203005570 Selection Guide Note2 Dice Part No. APHH1005RWF/A luminous Intensity Iv(mcd) @ 20 mA Lens Type WHITE (InGaN) YELLOW FLUORESCENT Note3 Φv (mlm) @ 20 mA Viewing Note1 Angle Min. Typ. Typ. 2θ1/2 70 140 850 170° Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 114 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C IF 30 mA IFM 100 mA Rth JA Rth JS 280 160 °C/W DC Forward Current Peak Forward Current Note4 Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size≥16 mm 2 per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Note1 Note1 Value Unit 0.33 - 0.34 - Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage 2.7 VF Note2 3.3 IF=20mA [Max.] Reverse Current (VR=5V) 3.8 [Typ.] 0.01 IR Reverse Current (VR=5V) V [Max.] μA 10 Temperature coefficient of x IF=20mA, -10°C≤ T≤100°C [Typ.] TC x -0.1 10-3 / °C Temperature coefficient of y IF=20mA, -10°C≤ T≤100°C [Typ.] TCy -0.2 10-3 / °C Temperature coefficient of VF IF=20mA, -10°C≤ T≤100°C [Typ.] TCV -2.5 mV/ °C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAG6504 REV NO: V.1 DATE:JUL/15/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:Y.L.LI PAGE: 2 OF 7 ERP: 1203005570 Brightness codes Note1 Note2 luminous Intensity Iv(mcd) @ 20 mA Φv (mlm) @ 20 mA Code. Min. Max. Typ. M 70 130 400 N 110 220 600 P 180 320 750 Q 280 420 920 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White APHH1005RWF/A SPEC NO: DSAG6504 REV NO: V.1 DATE:JUL/15/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:Y.L.LI PAGE: 3 OF 7 ERP: 1203005570 APHH1005RWF/A SPEC NO: DSAG6504 REV NO: V.1 DATE:JUL/15/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:Y.L.LI PAGE: 4 OF 7 ERP: 1203005570 APHH1005RWF/A SPEC NO: DSAG6504 REV NO: V.1 DATE:JUL/15/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:Y.L.LI PAGE: 5 OF 7 ERP: 1203005570 APHH1005RWF/A Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAG6504 REV NO: V.1 DATE:JUL/15/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:Y.L.LI PAGE: 6 OF 7 ERP: 1203005570 PACKING & LABEL SPECIFICATIONS APHH1005RWF/A SPEC NO: DSAG6504 REV NO: V.1 DATE:JUL/15/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:Y.L.LI PAGE: 7 OF 7 ERP: 1203005570