High Voltage IGBT with Diode IXDN 55N120AU1 Short Circuit SOA Capability C VCES = 1200 V IC25 = 85 A VCE(sat) typ = 2.5 V G Preliminary Data E E Test Conditions VCES TJ = 25°C to 150°C 1200 V VCGR TJ = 25°C to 150°C; RGE = 1 MΩ 1200 V VGES Continuous ±20 V VGEM Transient ±30 V IC25 TC = 25°C 85 A IC90 TC = 90°C 52 A ICM TC = 25°C, 1 ms 170 A E = Emitter ¬, G = Gate, SSOA (RBSOA) VGE = 15 V, TVJ = 125°C, RG = 22 Ω Clamped inductive load, L = 30 µH ICM = 100 @ VCES A ¬ Either Emitter terminal can be used as Main or Kelvin Emitter tSC (SCSOA) VGE = 15 V, VCE = VCES, TJ = 125°C RG = 22 Ω, non repetitive 10 µs PC TC = 25°C IGBT 450 W VISOL 50/60 Hz IISOL ≤ 1 mA t = 1 min t=1s 2500 3000 V~ V~ -40 ... +150 °C TJM 150 °C Tstg -40 ... +150 °C E G E C Features l TJ Md Mounting torque Terminal connection torque (M4) 1.5/13 Nm/lb.in. 1.5/13 Nm/lb.in. l l l l 30 g l l l l Symbol Test Conditions Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. BVCES IC = 5 mA, VGE = 0 V 1200 VGE(th) IC = 2 mA, VCE = VGE 4 ICES VCE = VCES, VGE = 0 V TJ = 25°C VCE = 0.8 VCES, VGE = 0 V TJ = 125°C IGES VCE = 0 V, VGE = ±20 V VCE(sat) IC = 50 A, VGE = 15 V IXYS reserves the right to change limits, test conditions and dimensions. V 5.5 6.5 V 2.4 15 3 19 mA mA ±500 nA 3 V AC motor speed control DC servo and robot drives DC choppers Uninterruptible power supplies (UPS) Switch-mode and resonant-mode power supplies Advantages l l l 2,5 Square RBSOA International standard package miniBLOC Isolation voltage 3000 V~ Low VCE(sat) - for minimum on-state conduction losses High switching speed Applications l Weight C = Collector E = Emitter ¬ Space savings Easy to mount with 2 screws High power density L215 (7/98) Maximum Ratings miniBLOC, SOT-227 B E153432 Symbol © 1998 IXYS All rights reserved IXDN 55N120AU1 Symbol Test Conditions Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. Cies Coes VCE = 25 V, VGE = 0 V, f = 1 MHz Cres Qg Qge IC = 50 A, VGE = 15 V, VCE = 0.5 VCES Qgc td(on) tri td(off) tfi Eon Eoff 3300 pF 500 pF 220 pF TBD nC TBD nC TBD nC 45 100 ns IC = 50 A, VGE = 15 V, VCE = 0.5 VCES, Ron/off = 22 Ω 55 100 ns 400 600 ns Remarks: Switching times may increase for VCE (Clamp) > 0.5 VCES, higher TJ or increased RG 70 100 ns 8.5 mJ 4.8 mJ Inductive load, TJ = 125°C RthJC 0.28 K/W RthCK 0.1 Reverse Diode (FRED) K/W Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. Symbol Test Conditions VF IF = 50 A, VGE = 0 V, Pulse test, t ≤ 300 µs, duty cycle d ≤ 2 % 1.8 2.2 V IRM IF = 50 A, VGE = 0 V, -diF/dt = 400 A/µs VR = 600 V TJ = 100°C 28 35 A trr IF = 50 A, VGE = 0 V, -diF/dt = 400 A/µs TJ = 100°C VR = 600 V 200 IF = 1 A; -di/dt = 200 A/µs; VR = 30 V TJ = 25°C 40 RthJC IXYS MOSFETs and IGBTs are covered by one of the following U.S.patents: © 1998 IXYS All rights reserved miniBLOC, SOT-227 B M4 screws (4x) supplied Dim. A B C D E F G H J K L M N O P ns 60 ns 0.6 K/W 4,835,592 4,881,106 5,017,508 5,049,961 5,187,117 5,486,715 4,850,072 4,931,844 5,034,796 5,063,307 5,237,481 5,381,025 Millimeter Min. Max. 31.5 7.8 4.0 4.1 4.1 14.9 30.1 38.0 11.8 8.9 0.75 12.6 25.2 1.95 - 31.7 8.2 4.3 4.3 15.1 30.3 38.2 12.2 9.7 0.85 12.8 25.4 2.05 5.0 Inches Min. Max. 1.241 0.307 0.158 0.162 0.162 0.587 1.186 1.497 0.465 0.351 0.030 0.496 0.993 0.077 - 1.249 0.323 0.169 0.169 0.595 1.193 1.505 0.481 0.382 0.033 0.504 1.001 0.081 0.197