CPC2017N

CPC2017N
60V Dual Normally-Open Single-Pole
8-Pin SOIC OptoMOS® Relay
INTEGRATED CIRCUITS DIVISION
Parameter
Blocking Voltage
Load Current
On-Resistance (max)
LED Current to operate
Rating
60
120
16
1
Units
VP
mArms / mADC

mA
Features
• Designed for use in Security Systems Complying
with EN50130-4
• 1500Vrms Input/Output Isolation
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Immune to Radiated EM Fields
• Wave Solderable
• Tape & Reel Version Available
• Small 8-Pin SOIC Package
Description
The CPC2017N is a miniature device with two
independent, normally-open (1-Form-A) solid state
relays in an 8-pin SOIC package that employs
optically coupled MOSFET technology to provide
1500Vrms of input to output isolation.
Optically coupled outputs that use the patented
OptoMOS architecture are controlled by a highly
efficient infrared LED.
The CPC2017N uses IXYS Integrated Circuits
Division’s state of the art, double-molded, vertical
construction packaging to produce one of the world’s
smallest relays. The CPC2017N offers substantial
board space savings over the competitor’s larger 8-pin
SOIC relay.
Approvals
Applications
• Security
• Passive Infrared Detectors (PIR)
• Data Signalling
• Sensor Circuitry
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Medical Equipment—Patient/Equipment Isolation
• Aerospace
• Industrial Controls
• UL Recognized Component: File E76270
• CSA Approval Pending
• EN/IEC 60950-1 Certified Component:
TUV Certificate B 13 12 82667 003
Ordering Information
Part #
CPC2017N
CPC2017NTR
Description
8-Pin SOIC (50/tube)
8-Pin SOIC (2000/reel)
Pin Configuration
8
1
+ Control
Load
7
2
– Control
Load
6
3
+ Control
Load
4
5
– Control
Load
Switching Characteristics
of Normally-Open (Form-A) Devices
Form-A
IF
90%
10%
ILOAD
ton
DS-CPC2017N-R04
www.ixysic.com
toff
1
INTEGRATED CIRCUITS DIVISION
CPC2017N
Absolute Maximum Ratings @ 25ºC
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Current
Peak (10ms)
Total Power Dissipation 1
Isolation Voltage, Input to Output
Operational Temperature
Storage Temperature
1
Ratings
60
5
50
1
600
1500
-40 to +85
-40 to +125
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to the
device. Functional operation of the device at conditions beyond
those indicated in the operational sections of this data sheet is
not implied.
Units
VP
V
mA
A
mW
Vrms
°C
°C
Typical values are characteristic of the device at +25°C, and
are the result of engineering evaluations. They are provided for
information purposes only, and are not part of the manufacturing
testing requirements.
Derate linearly 5mW / ºC
Electrical Characteristics @ 25ºC
Parameter
Output Characteristics
Load Current
Continuous 1
Peak
On-Resistance 2
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Capacitance, Input to Output
Input Characteristics
Input Control Current to Activate 3
Input Control Current to Deactivate
Input Voltage Drop
Reverse Input Current
1
2
3
2
Conditions
Symbol
Min
Typ
Max
Units
IF=1mA
t =10ms
IL=120mA
VL=60VP
IL
ILPK
RON
ILEAK
-
7.1
-
120
±350
16
1
mArms / mADC
mAP

IF=0mA, VL=50V, f=1MHz
VIO=0V, f=1MHz
ton
toff
COUT
CIO
-
1.25
0.45
5
1
3
3
-
IL=120mA
IF=5mA
VR=5V
IF
IF
VF
IR
0.1
0.9
-
0.40
0.35
1.2
-
1
1.4
10
IF=5mA, VL=10V
µA
ms
pF
pF
mA
mA
V
µA
Load current derates linearly from 120mA @ 25oC to 60mA @80oC, and must be derated for both poles operating simultaneously.
Measurement taken within 1 second of on-time.
For applications requiring high temperature operation (greater than 60oC) a minimum LED drive current of 3mA is recommended.
www.ixysic.com
R04
INTEGRATED CIRCUITS DIVISION
CPC2017N
PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted)*
25
20
15
10
5
1.17
15
10
5
1.0
25
Device Count (N)
20
15
10
1.1
1.2
1.3
1.4
1.5
0
5
0.26
0.28
0.30
0.32
0.34
0.36
0.38
Turn-Off Time (ms)
Typical IF for Switch Dropout
(N=50, IL=120mA)
Typical On-Resistance Distribution
(N=50, IF=1mA, IL=120mA)
35
30
10
0
10
Turn-On Time (ms)
15
5
15
1.6
20
5
20
0
1.19
1.21
1.23
1.25
LED Forward Voltage Drop (V)
Typical IF for Switch Operation
(N=50, IL=120mA)
25
Device Count (N)
20
0
0
Typical Turn-Off Time
(N=50, IF=5mA, IL=120mA)
25
Device Count (N)
Device Count (N)
Device Count (N)
30
25
Typical Turn-On Time
(N=50, IF=5mA, IL=120mA)
Device Count (N)
35
Typical LED Forward Voltage Drop
(N=50, IF=5mA)
25
20
15
10
5
0.30
0.35
0.40
0.45
0.50
0.55
0
0.30
0.60
0.35
LED Current (mA)
0.40 0.45 0.50
LED Current (mA)
0.55
0.60
6.8
6.9
7.0
7.1
7.2
7.3
7.4
On-Resistance (:)
Typical Blocking Voltage Distribution
(N=50)
35
Device Count (N)
30
25
20
15
10
5
0
80
82
84
86
88
90
92
Blocking Voltage (VP)
Typical Turn-On Time
vs. LED Forward Current
(IL=120mA)
IF=50mA
IF=20mA
IF=10mA
1.5
1.4
1.3
1.2
1.1
1.0
-40
IF=5mA
IF=2mA
IF=1mA
-20
0
20
40
60
Temperature (ºC)
80
100
3.0
2.7
2.4
2.1
1.8
1.5
1.2
0.9
0.6
0.3
0
Typical Turn-Off Time
vs. LED Forward Current
(IL=120mA)
0.7
0.6
Turn-Off Time (ms)
1.6
Turn-On Time (ms)
LED Forward Voltage Drop (V)
Typical LED Forward Voltage Drop
vs. Temperature
0.5
0.4
0.3
0.2
0.1
0
0
5
10
15
20
25
30
35
40
LED Forward Current (mA)
45
50
0
5
10
15
20
25
30
35
40
45
50
LED Forward Current (mA)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R04
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
CPC2017N
PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted)*
Typical IF for Switch Operation
vs. Temperature
(IL=60mA)
3.5
Turn-On Time (ms)
LED Current (mA)
2.5
2.0
1.5
1.0
0.5
0
-40
14
-20
0
20
40
60
Temperature (ºC)
80
3.0
IF=2mA
2.5
2.0
IF=5mA
1.5
1.0
-40
100
Turn-Off Time (ms)
3.0
Typical Turn-On Time vs. Temperature
(IL=50mA)
-20
0
20
40
60
Temperature (ºC)
80
130
100
120
8
Instantaneous
IF=5mA
6
50
0
-50
4
-100
2
-40
-150
-1.5
-20
0
20
40
60
Temperature (ºC)
80
100
91
0.016
89
0.014
87
Leakage (PA)
Blocking Voltage (VP)
Typical Blocking Voltage
vs. Temperature
85
83
81
-1.0
-0.5
0
0.5
Load Voltage (V)
1.0
-20
0
20
40
60
Temperature (ºC)
80
0.008
0.006
0
-40
100
100
90
80
14
0.010
100
80
110
-40
Typical Leakage vs. Temperature
(Measured Across Pins 5&6, 7&8)
(VL=60V)
0.002
-40
20
40
60
Temperature (ºC)
60
1.5
0.012
77
0
70
0.004
79
-20
Maximum Load Current vs. Temperature
(IF=2mA)
Load Current (mA)
Steady State
IF=2mA
150
Output Capacitance (pF)
10
Load Current (mA)
On-Resistance (:)
IF=5mA
IF=5mA
-40
100
IF=2mA
12
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
Typical Load Current vs. Load Voltage
(IF=1mA)
Typical On-Resistance vs. Temperature
(IL=60mA)
Typical Turn-Off Time vs. Temperature
(IL=50mA)
-20
0
20
40
60
Temperature (ºC)
80
100
Output Capacitance vs. Load Voltage
(IF=0mA, f=1MHz)
12
10
8
6
4
-20
0
20
40
60
Temperature (ºC)
80
100
10s
100s
0
10
20
30
40
Load Voltage (V)
50
60
Load Current (A)
Energy Rating Curve
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
10Ps 100Ps 1ms 10ms 100ms
Time
1s
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.ixysic.com
R04
INTEGRATED CIRCUITS DIVISION
CPC2017N
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
CPC2017N
MSL 3
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Soldering Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
Maximum Reflow Cycles
CPC2017N
260ºC for 30 seconds
3
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after soldering processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
R04
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
CPC2017N
MECHANICAL DIMENSIONS
CPC2017N
1.016 ± 0.025
(0.040 ± 0.001)
9.347 ± 0.203
(0.368 ± 0.008)
Pin 1
2.184 MAX
(0.086 MAX)
PCB Land Pattern
5.60
(0.22)
1.30
(0.051)
6.096 ± 0.102
(0.240 ± 0.004)
3.810 ± 0.051
(0.150 ± 0.002)
2.540 TYP
(0.100 TYP)
0.203 ± 0.025
(0.008 ± 0.001)
0.432 ± 0.127
(0.017 ± 0.005)
2.54
(0.100)
0.55
(0.022)
Pin to Package Standoff
MIN 0.0254 (0.001)
(MAX 0.102 (0.004)
0.838 ± 0.102
(0.033 ± 0.004)
Dimensions
mm
(inches)
0.381 ± 0.051
(0.015 ± 0.002)
CPC2017NTR Tape & Reel
1.75 ± 0.10
330.2 DIA.
(13.00 DIA.)
4.00 ± 0.10
8.00 ± 0.10
2.00 ± 0.10
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
1.20
7.50 ± 0.10
Ø1.50
+0.1, -0
6.50 9.65 ± 0.10
16.00 ± 0.30
Embossed Carrier
3.50
6.55 ± 0.10
Ø1.50 MIN
Embossment
2.35 ± 0.10
NOTES:
1. All dimensions in millimeters
2. 10 sprocket hole pitch cumulative tolerance ± 0.20.
3. Carrier camber is within 1mm in 250mm.
2.85 ± 0.10
4. Tape material : Black Conductive Polystyrene Alloy.
5. All dimensions meet EIA-481-C requirements.
6. Thickness : 0.30 ± 0.05mm.
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
6
Specification: DS-CPC2017N-R04
©Copyright 2014, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
11/18/2014