CPC2030N Dual Single-Pole, Normally Open 8-Pin SOIC OptoMOS® Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) LED Current to operate Rating 350 120 30 2 Units VP mArms / mADC mA Features • • • • • • • • Description The CPC2030N is a miniature device with two independent normally open (1-Form-A) solid state relays in an 8-Pin SOIC package that employs optically coupled MOSFET technology to provide 1500Vrms of input/output isolation. Optically coupled outputs using the patented OptoMOS architecture are controlled by a highly efficient GaAIAs infrared LED. 1500Vrms Input/Output Isolation TTL/CMOS Compatible Input Arc-Free With No Snubbing Circuits No EMI/RFI Generation Immune to Radiated EM Fields SMD Pick & Place, Wave Solderable Tape & Reel Version Available Small 8-Pin SOIC Package The CPC2030N uses IXYS Integrated Circuits Division’s state of the art, double-molded vertical construction packaging to produce one of the world’s smallest relays. The CPC2030N offers substantial board space savings over the competitor’s larger 8-Pin SOIC relay. Applications Approvals • Telecommunications • Security • Passive Infrared Detectors (PIR) • Data Signaling • Sensor Circuitry • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Medical Equipment—Patient/Equipment Isolation • Aerospace • Industrial Controls • UL Certified Component: File E76270 • CSA Certified Component: Certificate 1172007 • EN/IEC 60950-1 Certified Component: TUV Certificate B 10 05 49410 006 Ordering Information Part # CPC2030N CPC2030NTR Description 8-Pin SOIC (50/tube) 8-Pin SOIC (2000/reel) Pin Configuration 1 8 + Control Load 7 2 – Control Load 3 6 + Control Load 4 5 – Control Load Switching Characteristics of Normally Open (Form A) Devices Form-A IF 90% 10% ILOAD Pb DS-CPC2030N-R03 e3 ton www.ixysic.com toff 1 INTEGRATED CIRCUITS DIVISION CPC2030N Absolute Maximum Ratings @ 25°C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 350 5 50 1 70 600 1500 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW mW Vrms °C °C Derate linearly 5mW / ºC Electrical Characteristics @ 25°C Parameter Output Characteristics Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Capacitance, Input to Output Input Characteristics Input Control Current to Activate 3 Input Control Current to Deactivate Input Voltage Drop Reverse Input Current 1 2 3 2 Conditions Symbol Min Typ Max Units IF=2mA t =10ms IL=120mA VL=350VP IL ILPK RON ILEAK - 19.5 - 120 ±350 30 1 mArms / mADC mAP ton toff COUT - - 0.76 0.36 9 1 2 1 - IF IF VF IR 0.1 0.9 - 1.2 - 2 1.4 10 IF=5mA, VL=10V IF=0mA, VL=50V, f=1MHz IL=120mA IF=5mA VR=5V µA ms pF pF mA mA V µA Load current derates linearly from 120mA @ 25oC to 60mA @85oC, and must be derated for both poles operating simultaneously. Measurement taken within 1 second of on-time. For applications requiring high temperature operation (greater than 60oC) a LED drive current of 4mA is recommended. www.ixysic.com R03 INTEGRATED CIRCUITS DIVISION CPC2030N PERFORMANCE DATA* 15 10 15 10 5 0 15 10 5 0 1.275 0.60 5 0.70 0.75 0.80 0.85 Turn-On Time (ms) 0.90 0.34 20 15 10 5 0 0 0.3 0.4 0.5 0.6 0.7 LED Current (mA) 0.8 50 Typical Turn-On Time vs. LED Forward Current (IL=60mA, TA=25ºC) 10 2000 1500 1000 10 20 30 LED Current (mA) 2500 1.1 1.0 -40 -20 340 330 320 0 10 20 30 LED Current (mA) 1500 IF=5mA 1000 450 400 350 300 IF=5mA 250 IF=2mA 200 20 40 60 Temperature (ºC) 80 100 50 500 2000 150 500 0 40 Typical Turn-Off Time vs. Temperature (IL=60mA) 550 Turn-Off Time (Ps) Turn-On Time (Ps) Typical Turn-Off Time vs. LED Forward Current (IL=60mA, TA=25ºC) 350 50 IF=2mA 1.5 1.2 40 Typical Turn-On Time vs. Temperature (IL=60mA) Typical LED Forward Voltage Drop vs. Temperature IF=50mA IF=20mA IF=10mA IF=5mA IF=2mA 431 300 0 1.6 419 422 425 428 Blocking Voltage (VP) 310 0 0 1.10 1.15 1.20 1.25 1.30 1.35 1.40 1.45 1.50 1.55 LED Forward Voltage (V) 1.3 5 360 2500 500 1.4 10 370 Turn-Off Time (Ps) Turn-On Time (Ps) 20 15 416 3000 30 0.40 0 3500 40 0.36 0.37 0.38 0.39 Turn-Off Time (ms) 20 18.75 19.00 19.25 19.50 19.75 20.00 20.25 On-Resistance (:) 0.9 Typical LED Forward Voltage vs. LED Forward Current (TA=25ºC) 0.35 Typical Blocking Voltage Distribution (N=50, IF=0mA, TA=25ºC) 25 Device Count (N) 10 0.65 Typical On-Resistance Distribution (N=50, IF=2mA, IL=120mA, TA=25ºC) 25 Device Count (N) Device Count (N) 1.255 1.260 1.265 1.270 LED Forward Voltage (V) Typical IF for Switch Operation (N=50, IL=120mA, TA=25ºC) 15 LED Forward Voltage (V) 20 0 1.250 Typical Turn-Off Time (N=50, IF=5mA, IL=60mA, TA=25ºC) 25 Device Count (N) 20 5 LED Forward Current (mA) Typical Turn-On Time (N=50, IF=5mA, IL=60mA, TA=25ºC) 20 Device Count (N) Device Count (N) 25 Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25ºC) -40 -20 0 20 40 60 Temperature (ºC) 80 100 -40 -20 0 20 40 60 Temperature (ºC) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION CPC2030N PERFORMANCE DATA* Typical IF for Switch Operation (IL=60mA) 0.85 0.15 0.70 0.65 0.60 0.55 0.50 0.45 Load Current (mA) 0.75 0.05 0.00 -0.05 -0.10 0.40 -0.15 -20 0 20 40 60 Temperature (ºC) 80 100 Typical On-Resistance vs. Temperature (IF=4mA, IL=60mA) 32 -2 Blocking Voltage (VP) 28 26 24 22 20 18 -1 0 1 Load Voltage (V) 2 440 430 420 410 400 0 20 40 60 Temperature (ºC) Output Capacitance (pF) 50 80 100 60 -40 -20 0 20 40 60 Temperature (ºC) 80 100 Typical Leakage vs. Temperature Measured Across Pins 5 & 6, 7 & 8 (IF=0mA, VL=350V) 25 20 15 10 5 0 -40 -20 0 20 40 60 Temperature (ºC) Output Capacitance vs. Load Voltage (IF=0mA, f=1MHz, TA=25ºC) 80 100 -40 -20 0 20 40 60 Temperature (ºC) 80 100 Energy Rating Curve 0.9 0.8 40 Load Current (A) -20 80 30 450 390 -40 100 3 Typical Blocking Voltage vs. Temperature (IF=0mA) 460 30 120 40 -3 Leakage Current (nA) -40 Maximum Load Current vs. Temperature (IF=4mA) 140 0.10 Load Current (A) LED Current (mA) 0.80 On-Resistance (:) Typical Load Current vs. Load Voltage (IF=2mA, TA=25ºC) 30 20 10 0.7 0.6 0.5 0.4 0.3 0.2 0 0 50 100 150 200 250 Load Voltage (V) 300 350 0.1 10Ps 100Ps 1ms 10ms 100ms Time 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R03 INTEGRATED CIRCUITS DIVISION CPC2030N Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating CPC2030N MSL 3 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time CPC2030N 260ºC for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R03 e3 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION CPC2030N MECHANICAL DIMENSIONS CPC2030N 1.016 ± 0.025 (0.040 ± 0.001) 9.347 ± 0.203 (0.368 ± 0.008) Pin 1 2.184 MAX (0.086 MAX) PCB Land Pattern 5.60 (0.22) 1.30 (0.051) 6.096 ± 0.102 (0.240 ± 0.004) 3.810 ± 0.051 (0.150 ± 0.002) 2.540 TYP (0.100 TYP) 0.203 ± 0.025 (0.008 ± 0.001) 0.432 ± 0.127 (0.017 ± 0.005) 2.54 (0.100) 0.55 (0.022) Lead to Package Standoff MIN 0.0254 (0.001) (MAX 0.102 (0.004) 0.838 ± 0.102 (0.033 ± 0.004) Dimensions mm (inches) 0.381 ± 0.051 (0.015 ± 0.002) CPC2030NTR Tape & Reel 1.75 ± 0.10 330.2 DIA. (13.00 DIA.) 4.00 ± 0.10 8.00 ± 0.10 2.00 ± 0.10 Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 1.20 7.50 ± 0.10 Ø1.50 +0.1, -0 6.50 9.65 ± 0.10 16.00 ± 0.30 Embossed Carrier 3.50 6.55 ± 0.10 Ø1.50 MIN Embossment 2.35 ± 0.10 NOTES: 1. All dimensions in millimeters 2. 10 sprocket hole pitch cumulative tolerance ± 0.20. 3. Carrier camber is within 1mm in 250mm. 4. Tape material : Black Conductive Polystyrene Alloy. 2.85 ± 0.10 5. All dimensions meet EIA-481-C requirements. 6. Thickness : 0.30 ± 0.05mm. 7. Component load per 13” reel : 2000 pcs. For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-CPC2030N-R03 ©Copyright 2012, IXYS Integrated Circuits Division OptoMOS® is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/17/2012