220W AC-DC High Reliability Industrial Adaptor
■ Features
Universal AC input / Full range
3 pole AC inlet IEC320-C14
Built-in active PFC function
No load power consumption<0.15W
Energy efficiency Level VI
Comply with EISA 2007/DoE,NRCan,
GST220A
series
■ Applications
Consumer electronic devices
Telecommunication devices
Office facilities
Industrial equipments
AU/NZ MEPS,EU ErP and CoC Version 5
ClassⅠpower (with earth pin)
Protections: Short circuit / Overload / Over voltage
/Over temperature
Fanless design with -30~+70℃ working temperature
Fully enclosed plastic case
LED indicator for power on
3 years warranty
■ Description
GST220A is a highly reliable, 220W desktop style single-output green adaptor series. This product is a
classⅠpower unit (with FG), equipped with a standard IEC320-C14 AC inlet and adopting the input range
from 85VAC to 264VAC. The entire series supplies different models with output voltages ranging between
12VDC and 48VDC that can satisfy the demands for various types of consumer electronic devices.
With the efficiency up to 94.5% and the extremely low no-load power consumption below 0.15W, GST220A is
compliant with USA EISA 2007/DoE, Canada NRCan, Australia and New Zealand MEPS, EU ErP,and Code
of Conduct (CoC) Version 5. The supreme feature allows the adaptor to save the energy when it is either
under the operating mode or the standby mode. The entire series utilizes the 94V-0 flame retardant plastic
case.GST220A is certified for the international safety regulations.
■ Model Encoding
GST 220 A 12 - R7B
DC plug type
{
R7B: Plug for standard model,Power DIN 4Pin with lock type
Optional plug type available by customer requested
Output voltage
IEC320-C14 AC inlet
Output wattage
Series name
File Name:GST220A-SPEC 2015-06-12
220W AC-DC High Reliability Industrial Adaptor
GST220A
series
SPECIFICATION
ORDER NO.
SAFETY MODEL NO.
DC VOLTAGE
OUTPUT
PROTECTION
GST220A15-R7B
GST220A20-R7B
GST220A24-R7B
GST220A48-R7B
GST220A12
GST220A15
15V
GST220A20
20V
GST220A24
24V
GST220A48
48V
Note.2 12V
RATED CURRENT
15A
13.4A
11A
9.2A
4.6A
CURRENT RANGE
0 ~ 15A
0 ~ 13.4A
0 ~ 11A
0 ~ 9.2A
0 ~ 4.6A
RATED POWER (max.)
180W
RIPPLE & NOISE (max.) Note.3 80mVp-p
201W
220W
221W
221W
100mVp-p
150mVp-p
180mVp-p
240mVp-p
VOLTAGE TOLERANCE Note.4 ±5.0%
±5.0%
±4.0%
±3.0%
±2.0%
LINE REGULATION
Note.5 ±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±5.0%
±5.0%
±4.0%
±3.0%
±2.0%
93.5%
94.5%
LOAD REGULATION
INPUT
GST220A12-R7B
SETUP, RISE TIME
Note.6 2000ms, 50ms / 230VAC
HOLD UP TIME (Typ.)
VOLTAGE RANGE
20ms / 230VAC
20ms / 115VAC at full load
Note.7 85 ~ 264VAC 120 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.91 / 230VAC
EFFICIENCY (Typ.)
90%
AC CURRENT (Typ.)
INRUSH CURRENT (max.)
120A / 230VAC
4A / 115VAC
2000ms, 50ms / 115VAC at full load
PF>0.98 / 115VAC at full load
90%
92%
2A / 230VAC
LEAKAGE CURRENT(max.)
0.75mA / 240VAC
OVERLOAD
105 ~ 135% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
105 ~ 135% rated output voltage
OVER VOLTAGE
OVER TEMPERATURE
Protection type : H iccup mode @ 10%load
Shut down o/p voltage, recovers automatically after temperature goes down
WORKING TEMP.
WORKING HUMIDITY
-30 ~ +70℃ (Refer to "Derating Curve")
20% ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03% / ℃ (0~50℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, CSA C22.2,TUV EN60950-1, BSMI CNS14336, CCC GB4943, PSE J60950-1 approved
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC
(Note. 8) EMC EMISSION
EMC IMMUNITY
OTHERS
CONNECTOR
NOTE
I/P-O/P: 3KVAC I/P-FG: 2KVAC O/P-FG:SHORT
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55022 class B, EN61000-3-2,3, FCC PART 15 / CISPR22 class B, CNS13438 class B, GB9254, GB17625.1
Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A
PACKING
PLUG
209.4K hrs min. MIL-HDBK-217F(25℃)
210*85*46mm (L*W*H)
1.1Kg; 12pcs/14.2Kg/0.96CUFT
See page 3 ; Other type available by customer requested
CABLE
See page 3 ; Other type available by customer requested
MTBF
DIMENSION
1. All parameters are specified at 230VAC input, rated load, 25℃ 70% RH ambient.
2. DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3. Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4. Tolerance: includes set up tolerance, line regulation, load regulation.
5. Line regulation is measured from low line to high line at rated load.
6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
7. Derating may be needed under low input voltage. Please check the derating curve for more details.
8. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the
EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on http://www.meanwell.com)
File Name:GST220A-SPEC 2015-06-12
GST220A
220W AC-DC High Reliability Industrial Adaptor
Derating Curve
series
Static Characteristics
100
230VAC
100
90
For others
80
80
100VAC for others
110VAC for 12~15V
60
LOAD (%)
LOAD (%)
40
20
-30
0
10
20
30
40
50
For 12~15V
70
50
60
70
60
50
40
(HORIZONTAL)
AMBIENT TEMPERATURE (℃)
85
90
100
110
120
140
160
180
200
220
240
INPUT VOLTAGE (VAC) 60Hz
Mechanical Specification
Case No. 961A
46
264
Unit:mm
210
UL2464 16AWGx4C 1000±50mm
POWER LED
30±3mm
85
23
14
Plug Assignment
Output plug (Power DIN 4 pin with lock type) : KYCON KPPX-4P equivalent
Mating plug (customer side , not provide with power supply) : KYCON KPJX-CM-4S equivalent
R7B
PIN NO. OUTPUT
2
1
3
4
1,4
+V
2,3
-V
AC FG
-V connected to AC FG
Installation Manual
Please refer to : http://www.meanwell.com/webnet/search/InstallationSearch.html
File Name:GST220A-SPEC 2015-06-12