RENESAS H7N1004LS

www.DataSheet4U.com
H7N1004LD, H7N1004LS, H7N1004LM
Silicon N-Channel MOSFET
High-Speed Power Switching
REJ03G0072-0600Z
(Previous ADE-208-1552E(Z))
Rev.6.00
Aug.27.2003
Features
•
•
•
•
Low on-resistance
RDS(on) = 25 mΩ typ.
Low drive current
Available for 4.5 V gate drive
Outline
LDPAK
4
4
4
D
G
1
1
S
2
3
H7N1004LS
3
H7N1004LD
Rev.6.00, Aug.27.2003, page 1 of 11
2
1
2
3
H7N1004LM
1. Gate
2. Drain
3. Source
4. Drain
H7N1004LD, H7N1004LS, H7N1004LM
Absolute Maximum Ratings
(Ta = 25°C)
Item
Symbol
Value
Unit
Drain to source voltage
VDSS
100
V
Gate to source voltage
VGSS
±20
V
Drain current
ID
30
A
Note1
Drain peak current
ID (pulse)
100
A
Body-drain diode reverse drain
current
IDR
30
A
Avalanche current
IAP Note 3
15
A
22.5
mJ
50
W
Avalanche energy
EAR
Note 3
Note 2
Channel dissipation
Pch*
Channel temperature
Tch
150
°C
Storage temperature
Tstg
–55 to +150
°C
Notes: 1. PW ≤ 10 µs, duty cycle ≤ 1%
2. Value at Tc = 25°C
3. Value at Tch = 25°C, Rg ≥ 50 Ω
Rev.6.00, Aug.27.2003, page 2 of 11
H7N1004LD, H7N1004LS, H7N1004LM
Electrical Characteristics
(Ta = 25°C)
Item
Symbol Min
Typ
Max
Unit
Test conditions
100
—
—
V
ID = 10 mA, VGS = 0
V(BR)GSS ±20
—
—
V
IG = ±100 µA, VDS = 0
Gate to source leak current
IGSS
—
—
±10
µA
VGS = ±16 V, VDS = 0
Zero gate voltage drain current
IDSS
—
—
10
µA
VDS = 100 V, VGS = 0
Gate to source cutoff voltage
VGS(off)
1.5
—
2.5
V
ID = 1 mA, VDS = 10 V Note 1
Static drain to source on state
RDS(on)
—
25
35
mΩ
ID = 15 A, VGS = 10 V Note 1
—
30
45
mΩ
ID = 15 A, VGS = 4.5 V Note 1
Drain to source breakdown voltage V(BR)DSS
Gate to source breakdown voltage
resistance
Forward transfer admittance
|yfs|
22
37
—
S
ID = 15 A, VGS = 10 V Note 1
Input capacitance
Ciss
—
2800
—
pF
VDS = 10 V
Output capacitance
Coss
—
240
—
pF
VGS = 0
Reverse transfer capacitance
Crss
—
140
—
pF
f = 1 MHz
Total gate charge
Qg
—
50
—
nC
VDD = 50 V
Gate to source charge
Qgs
—
9
—
nC
VGS = 10 V
Gate to drain charge
Qgd
—
11
—
nC
ID = 30 A
Turn-on delay time
td(on)
—
23
—
ns
VGS = 10 V, ID = 15 A
Rise time
tr
—
120
—
ns
RL = 2 Ω
Turn-off delay time
td(off)
—
70
—
ns
Rg = 4.7 Ω
Fall time
tf
—
9.5
—
ns
Body-drain diode forward voltage
VDF
—
0.9
—
V
IF = 30 A, VGS = 0
Body-drain diode reverse recovery
time
trr
—
47
—
ns
IF = 30 A, VGS = 0
diF/dt = 100 A/µs
Notes: 1. Pulse test
Rev.6.00, Aug.27.2003, page 3 of 11
H7N1004LD, H7N1004LS, H7N1004LM
Main Characteristics
Maximum Safe Operation Area
Power vs. Temperature Derating
200
100
Drain Current I D (A)
Channel Dissipation
Pch (W)
80
60
40
20
30
10
µ
0µ s
s
10
1
=
DC 10 ms
m
(T Op s (
c = e 1s
25 ratio hot)
°C n
)
10
3
1
0.3 Operation in
this area is
0.1 limited by RDS(on)
0
50
100
Case Temperature
150
200
0.02
0.1
Tc (°C)
Typical Output Characteristics
50
V DS = 10 V
Pulse Test
40
30
3.5 V
20
10
Drain Current I D (A)
40
30
20
10
VGS = 3 V
0
3
30
0.3
1
10
100
Drain to Source Voltage VDS (V)
Typical Transfer Characteristics
4V
6V
Ta = 25°C
50
Pulse Test
10 V
Drain Current I D (A)
PW
2
4
6
8
10
Drain to Source Voltage V DS (V)
Rev.6.00, Aug.27.2003, page 4 of 11
-25°C
25°C
Tc = 75°C
0
3
4
5
1
2
Gate to Source Voltage V GS (V)
H7N1004LD, H7N1004LS, H7N1004LM
Drain to Source Saturation Voltage
V DS(on) (V)
1.0
Drain to Source on State Resistance
RDS(on) (mΩ)
Drain to Source Saturation Voltage VS.
Gate to Source Voltage
Pulse Test
0.8
0.6
I D = 20 A
0.4
10 A
0.2
5A
Static Drain to Source on State Resistance
vs. Drain Current
500
Pulse Test
200
100
50
V GS = 4.5 V
20
10 V
10
5
0
5
10
15
1
20
Gate to Source Voltage VGS (V)
80
I D = 20 A
5, 10 A
60
40
V GS = 4.5 V
I D = 20 A
5, 10 A
20
V GS = 10 V
0
–25
0
25
50
75
100 125 150
Case Temperature Tc
Rev.6.00, Aug.27.2003, page 5 of 11
(°C)
5
10 20
50
Drain Current I D (A)
100
Forward Transfer Admittance vs.
Drain Current
Forward Transfer Admittance |yfs| (S)
Static Drain to Source on State Resistance
RDS(on) (mΩ)
Static Drain to Source on State Resistance
vs. Temperature
100
Pulse Test
2
100
Tc = –25°C
10
1
0.1
25°C
75°C
V DS = 10 V
Pulse Test
0.01
0.01
0.1
1
10
Drain Current I D (A)
100
H7N1004LD, H7N1004LS, H7N1004LM
Body-Drain Diode Reverse
Recovery Time
Typical Capacitance vs.
Drain to Source Voltage
10000
5000
Capacitance C (pF)
Reverse Recovery Time trr (ns)
100
50
20
Ciss
2000
1000
500
200
Coss
100
50
10
0.1
di / dt = 100 A / µs
V GS = 0, Ta = 25°C
Crss
VGS = 0
f = 1 MHz
20
10
0
0.3
1
3
10
30
100
Reverse Drain Current I DR (A)
10
16
12
80
0
8
VDD = 100 V
50 V
25 V
20
40
60
80
Gate Charge Qg (nC)
Rev.6.00, Aug.27.2003, page 6 of 11
4
VDS
0
100
V GS = 10 V, V DD = 30 V
PW = 5 µs, duty ≤ 1%
R G = 4.7 Ω
Switching Time t (ns)
VGS
120
40
40
50
1000
20
Gate to Source Voltage V GS (V)
Drain to source Voltage V DS (V)
VDD = 25 V
50 V
160
100 V
I D = 30 A
30
Switching Characteristics
Dynamic Input Characteristics
200
20
Drain to Source Voltage V DS (V)
100
tr
t d(off)
t d(on)
tf
10
1
0.1
0.3
1
3
10
30
Drain Current I D (A)
100
H7N1004LD, H7N1004LS, H7N1004LM
Maximum Avalanche Energy vs.
Channel Temperature Derating
EAR (mJ)
Reverse Drain Current vs.
Source to Drain Voltage
0, -5 V
V GS = 10 V
40
Repetitive Avalanche Energy
Reverse Drain Current I DO (A)
50
30
5V
20
10
Pulse Test
0
0.4
0.8
1.2
1.6
Source Drain Voltage
VSD
2.0
40
I AP = 15 A
V DD = 50 V
duty < 0.1 %
Rg > 50 Ω
32
24
16
8
0
25
(V)
Avalanche Test Circuit
50
75
100
Channel Temperature
125
150
Tch (°C)
Avalanche Waveform
EAR =
L
V DS
Monitor
1
2
• L • I AP •
2
I AP
Monitor
VDSS
VDSS – V DD
V (BR)DSS
I AP
Rg
D. U. T
V DS
VDD
ID
Vin
15 V
50Ω
0
Rev.6.00, Aug.27.2003, page 7 of 11
VDD
H7N1004LD, H7N1004LS, H7N1004LM
Normalized Transient Thermal Impedance vs. Pulse Width
Normalized Transient Thermal Impedance
γ s (t)
3
Tc = 25°C
1
D=1
0.5
0.3
0.2
0.1
0.03
θ ch - c(t) = γs (t) • θ ch - c
θ ch - c = 2.5°C/ W, Tc = 25°C
0.1
0.05
0.02
1
e
0.0
uls
tp
o
h
1s
0.01
10 µ
PDM
PW
T
D=
PW
T
100 µ
1m
10 m
100 m
1
10
Pulse Width PW (s)
Switching Time Test Circuit
Switching Time Waveform
Vout
Monitor
Vin Monitor
Rg
90%
D.U.T.
RL
Vin
Vin
10 V
V DS
= 30 V
Vout
10%
10%
90%
td(on)
Rev.6.00, Aug.27.2003, page 8 of 11
tr
10%
90%
td(off)
tf
H7N1004LD, H7N1004LS, H7N1004LM
Package Dimensions
• H7N1004LD
As of January, 2003
4.44 ± 0.2
10.2 ± 0.3
1.3 ± 0.15
1.3 ± 0.2
1.37 ± 0.2
0.2
0.86 +– 0.1
0.76 ± 0.1
2.54 ± 0.5
2.54 ± 0.5
11.0 ± 0.5
8.6 ± 0.3
11.3 ± 0.5
0.3
10.0 +– 0.5
(1.4)
Unit: mm
2.49 ± 0.2
0.4 ± 0.1
Package Code
JEDEC
JEITA
Mass (reference value)
Rev.6.00, Aug.27.2003, page 9 of 11
LDPAK (L)
—
—
1.40 g
H7N1004LD, H7N1004LS, H7N1004LM
• H7N1004LS
As of January, 2003
Unit: mm
(1.5)
10.0
7.8
7.0
2.49 ± 0.2
0.2
0.1 +– 0.1
1.7
7.8
6.6
1.3 ± 0.15
+ 0.3
– 0.5
8.6 ± 0.3
(1.5)
(1.4)
4.44 ± 0.2
10.2 ± 0.3
2.2
1.37 ± 0.2
2.54 ± 0.5
0.2
0.86 +– 0.1
2.54 ± 0.5
0.4 ± 0.1
0.3
3.0 +– 0.5
1.3 ± 0.2
Package Code
JEDEC
JEITA
Mass (reference value)
Rev.6.00, Aug.27.2003, page 10 of 11
LDPAK (S)-(1)
—
—
1.30 g
H7N1004LD, H7N1004LS, H7N1004LM
• H7N1004LM
As of January, 2003
Unit: mm
(2.3)
10.0
7.8
7.0
2.49 ± 0.2
1.7
7.8
6.6
1.3 ± 0.15
+ 0.3
– 0.5
8.6 ± 0.3
(1.5)
(1.4)
4.44 ± 0.2
10.2 ± 0.3
0.2
0.1 +– 0.1
2.2
1.37 ± 0.2
2.54 ± 0.5
0.2
0.86 +– 0.1
2.54 ± 0.5
0.4 ± 0.1
0.3
5.0 +– 0.5
1.3 ± 0.2
Package Code
JEDEC
JEITA
Mass (reference value)
Rev.6.00, Aug.27.2003, page 11 of 11
LDPAK (S)-(2)
—
—
1.35 g
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with
them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of
nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corporation product best suited to the customer's application; they
do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation or a third party.
2. Renesas Technology Corporation assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts,
programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these
materials, and are subject to change by Renesas Technology Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers
contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor for the latest product information before purchasing a product listed
herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corporation by various means, including the Renesas Technology Corporation Semiconductor home page
(http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information
as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corporation assumes no responsibility for any damage,
liability or other loss resulting from the information contained herein.
5. Renesas Technology Corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially
at stake. Please contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor when considering the use of a product contained
herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
6. The prior written approval of Renesas Technology Corporation is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be
imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corporation for further details on these materials or the products contained therein.
http://www.renesas.com
© 2003. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon 0.0