[1] of [2] High Power / High Speed MQW IR-Chip 131254-960 • Mechanical Specification: Dimension - Chip size: 365 x 365µm Thickness: typ. 250µm P Bonding Pad: 110µm Electrodes / Metallization - p-side (anode): n-side (cathode) Au alloy Au alloy - p-Electrode p-Epitaxy 365 active layer 250 typ. n-Epitaxy n-Substrate GaAs 365 n-Electrode • Electrical and Optical Characteristics (T=25°C): Parameter Symbol Condition Min. Typ. Max. Unit Forward Voltage Vf If = 20mA 1.25 1.45 V Reverse Current Ir Vr = 5V 10 µA Output Power (1) Φe If = 20mA 2.0 mW Switching Time tr, tf If = 20mA 15/20 ns FWHM ½ λp If = 20mA 35 nm Peak Wavelength λp If = 20mA 960 nm NOTE: (1) Power is measured by OSA on gold plate Copyright © 2012 OSA Opto Light GmbH. All Rights Reserved www.osa-opto.com 201206 rev. 1 [2] of [2] High Power / High Speed MQW IR-Chip 131254-960 • Packing / Labeling: Dice on adhesive film: 1) wire bond side on top (Standard) 2) back contact on top • General Remarks: “RoHS-compliant”, fulfill the requirements of RoHS Directive 2002/95/EC “REACH- compliant” We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use OSA Opto Light products for any unintended or unauthorized application, the buyer shall indemnify OSA Opto Light against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. OSA Opto Light products described in this document are not authorized for use as critical components in life support systems without the written consent of the appropriate officer of OSA Opto Light GmbH. Life support systems are either systems intended for surgical implant in the body or systems which sustain life. Copyright © 2012 OSA Opto Light GmbH. All Rights Reserved www.osa-opto.com 201206 rev. 1