Rocker Switches LTIL-Series The LTIL-Series Tippette rocker switches are lighted, single pole and available with AC ratings to 17 amps. These switches are also suitable for low voltage DC applications. A variety of circuits, colors, terminations and lamp voltages are available. Specifications •Certifications*: UL, CSA •Dielectric Strength: 1,000V (minimum) •Insulation Resistance: 100 Megohms (minimum) •Base Material: Phenolic •Actuator Material: Nylon •Bezel Material: Nylon or Steel * Due to ongoing technological advances, consult factory for certification specifics. .075[1.91] DIA .125[3.18] DIA Dimensional Specifications: in. [mm] .330[8.38] .960[24.38] .187[4.74] 1.700[43.18] SOLDER LUG .055[1.40] DIA .437[11.09] .394[10.00] .250[6.35] .187[4.74] .250 TAB (Q.C.) .187 TAB (Q.C.) TERMINAL TYPE .080[2.03] .372[9.45] 1.069[27.15] #6-32NC-2 THREAD .422[10.71] .187[4.75] 6.000[152.40] .141[3.58] .370[9.39] .500[12.70] .350[8.89] .286[7.26] 1.190[30.22] .680[17.27] MOUNTING HOLE (Nylon Snap-in Brackets) Panel Thickness: .040 min. - .250 max. 1.450[36.83] A 5 PRINTED CIRCUIT WIRE LEAD 1 - 6S *Angled corners are suggested for optimum fit. Standard rectangular cutout is acceptable. - BL - RC - NBL / 125N SERIES RATING ACTUATOR STYLE1 ACTUATOR COLOR2 BRACKET STYLE4 LTIL SINGLE POLE LIGHTED IN DOUBLE POLE BASE 5 1C CROSS SERRATED 1L LONG LINED 1S SMOOTH ANGLED 6M5 MATTE CURVED (M, N OR W BRACKETS ONLY) 6S SMOOTH CURVED (M, N & W BRACKETS ONLY) 7S TOGGLE BL BLACK WH WHITE A B C FN FW MBL NBL WBL 6 CIRCUIT 7 A B C ON-NONE-OFF ON-NONE-ON ON-OFF-ON 10A 250VAC 15A 125VAC 1/2HP 125-250VAC 3A 250VAC 6A 125VAC 1/4HP 125-250VAC 12A 250VAC 17A 125VAC 3/4HP 125VAC 1HP 250VAC NOTES: Shading indicates standard configurations. Panel Cut-Out Recommendations: For sheet metal panels, switch must enter panel in same direction as the punch. (Burr on bottom.) Test cut hole in actual material. 1 Imprinting available on smooth face rockers. Other actuator styles available. Consult factory. 2 Glossy finish is standard. Custom colors are available. Consult factory. 3 Green and blue lenses are not recommended with 125 volt or 250 volt neon lamps. For two different color lenses, please specify when ordering lens color. (ex.) RC/GN 4 Barbs are available on FN style bracket to accommodate panel thickness of .062, .100, .125, .156 and .250. Specify after bracket selection. (ex.) FN/.125 MBL, NBL & WBL brackets are molded in black. If white is desired, specify as MWH, NWH & WWH. FN and FW brackets have a nickel-plated finish. Additional finishes are available; specify as follows: stainless steel: FN/SS; chrome: FN/CHR; black oxide: FW/BLK. FW bracket not available in stainless steel. Bracket style MBL consists of LNP rocker, neoprene seal, syntech grease, dummy rivets. MBL does not have UL & CSA approvals. 5 Actuator & Bracket Finish is a matched set. 44 SCREW (ASSEMBLED) .830[21.08] 55° 4 plcs* LTIL .187[4.75] LENS COLOR3 AM CL GN LU RC WH AMBER CLEAR GREEN BLUE RED WHITE NARROW WIDE MARINE WATERSHEDDING LAMP VOLTAGE 6 VOLT/ INCANDESCENT 12V 12 VOLT/ .250 .187 INCANDESCENT SOLDER TAB TAB SCREW WIRE PC FUNCTION LUG (QC) (QC) TERM. LEAD TERM. 18V 18 VOLT/ INCANDESCENT ON-NONE-OFF 0 1 3 4 5 6 24V 24 VOLT/ (ON)-NONE-OFF A B D E F G INCANDESCENT ON-NONE-(OFF) L M R S T U 28V 28 VOLT/ ON-NONE-ON 0 1 3 4 5 6 INCANDESCENT ON-NONE-(ON) A B D E F G 125N 125 VOLT/ NEON ON-OFF-ON 0 1 3 4 5 6 250N 250 VOLT/ NEON ON-OFF-(ON) A B D E F G (ON)-OFF-(ON) L M R S T U TERMINATION/FUNCTION 6V Carlingswitch,Inc. (860) 793-9281• Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 Rocker Switches Actuator Style/Dimensions: in. [mm] .250[6.35] 1.224[31.08] 1.224[31.08] 1.224[31.08] 1.224[31.08] 1.224[31.08] 1C 1L 1S 6S 7S CROSS-LINE W/ONE LENS LONG-LINE W/ONE LENS SMOOTH W/ONE LENS CURVED W/ONE LENS TOGGLE-STYLE W/ONE LENS Bracket Dimensions: in. [mm] # 6-32NC-2 TAP .156[3.96] DIA .070[1.77] .158[4.01] DIA TAPPED HOLE CLEARANCE HOLE Standard with A & B Brackets Standard with C Bracket 1.940[49.27] 1.940[49.27] 2.090[53.08] .078[1.98] .156[3.96] .426[10.82] 1.625[41.27] 1.625[41.27] 1.625[41.27] A B C 1.700[43.18] GCP GLOSS FINISH .960[24.38] GMP MATTE FINISH HOLE PLUG FOR TIL, TIG, TIH & TII 1.570[39.88] .430[10.92] NARROW WIDE MARINE / STD / WATERSHEDDING 1.570[39.87] 1.750[44.45] 1.700[43.18] .900[22.86] .960[24.38] 1.126[28.60] FN FW MBL, NBL, WBL METAL, SNAP-IN METAL, SNAP-IN BLACK NYLON, SNAP-IN NOTES Double brackets supplied on LTIH-Series when B style bracket is specified. Consult factory for dimensional information. Carlingswitch,Inc. (860) 793-9281• Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 45