PHOTODIODE 0.0008 mm2 AXUVHS6 FEATURES • • • • SSMA connector Ideal for electron detection 100% internal QE Ultra high speed Dimensions are in inch [metric] units. ELECTRO-OPTICAL CHARACTERISTICS AT 25°C PARAMETERS Active Area Responsivity, R TEST CONDITIONS MIN 0.029mm x 0.029mm TYP 0.0008 55 IR = 1µA Capacitance, C VR = 50V 1 VR = 52V, RL = 50Ω 50 VR = 52V 0.5 Dark Current UNITS mm2 (see graphs on next page) Reverse Breakdown Voltage, VR Rise Time MAX Volts 3 pF psec 10 nA THERMAL PARAMETERS STORAGE AND OPERATING TEMPERATURE RANGE Ambient1 Nitrogen or Vacuum Maximum Junction Temperature -10° TO 40°C1 -20°C TO 80°C 70°C 1 Temperatures exceeding these parameters may create Oxide growth on the active area. Over time responsivity to low energy radiation and wavelengths below 150nm will be compromised. Tighten to maximum torque of 5 inch/pounds. Permament damage will result if higher torque values are used and warranty is voided. 1260 Calle Suerte, Camarillo, California 93012 Phone: (805) 499-0335, Fax: (805) 499-8108 Email: [email protected], Website: www.optodiode.com Revision July 20, 2015 PHOTODIODE 0.0008 mm2 RESPONSIVITY (A/W) 0.30 AXUVHS6 ELECTRON RESPONSE 0.25 0.20 0.15 0.10 0.05 0.00 100 1000 10,000 100,000 ENERGY (ev) RESPONSIVITY (A/W) 0.30 EUV-UV PHOTON RESPONSE 0.25 0.20 0.15 0.10 0.05 0.00 0 RESPONSIVITY (A/W) 0.5 50 100 150 WAVELENGTH (nm) 200 250 UV-VIS-NIR PHOTON RESPONSIVITY 0.4 0.3 0.2 0.1 0.0 200 300 400 500 600 700 800 900 1000 1100 WAVELENGTH (nm) 1260 Calle Suerte, Camarillo, California 93012 Phone: (805) 499-0335, Fax: (805) 499-8108 Email: [email protected], Website: www.optodiode.com Revision July 20, 2015