PHOTODIODE 1 mm2 AXUVHS5 FEATURES • • • • SMA connector Ideal for electron detection 100% internal QE Ultra high speed Dimensions are in inch [metric] units. ELECTRO-OPTICAL CHARACTERISTICS AT 25°C PARAMETERS Active Area Responsivity, R TEST CONDITIONS MIN 1mm x 1mm TYP MAX UNITS mm2 1 A/W (see graphs on next page) 55 Reverse Breakdown Voltage, VR IR = 1µA Capacitance, C VR = 0V 40 pF RL = 50Ω, VR = 52V 700 psec 1 nA Rise Time Dark Current VR = 52V Volts 0 THERMAL PARAMETERS STORAGE AND OPERATING TEMPERATURE RANGE Ambient1 Nitrogen or Vacuum Maximum Junction Temperature -10° TO 40°C1 -20°C TO 80°C 70°C 1 Temperatures exceeding these parameters may create oxide growth on the active area. Over time responsivity to low energy radiation and wavelengths below 150nm will be compromised. Tighten to maximum torque of 5 inch/pounds. Permanent damage will result if higher torque values are used and warranty is voided. 750 Mitchell Road, Newbury Park, California 91320 Phone: (805) 499-0335, Fax: (805) 499-8108 Email: [email protected], Website: www.optodiode.com Revision February 26, 2013 PHOTODIODE 1 mm2 RESPONSIVITY (A/W) 0.30 AXUVHS5 ELECTRON RESPONSE 0.25 0.20 0.15 0.10 0.05 0.00 100 1000 10,000 100,000 ENERGY (ev) RESPONSIVITY (A/W) 0.30 EUV-UV PHOTON RESPONSE 0.25 0.20 0.15 0.10 0.05 0.00 0 RESPONSIVITY (A/W) 0.5 50 100 150 WAVELENGTH (nm) 200 250 UV-VIS-NIR PHOTON RESPONSIVITY 0.4 0.3 0.2 0.1 0.0 200 300 400 500 600 700 800 900 1000 1100 WAVELENGTH (nm) 750 Mitchell Road, Newbury Park, California 91320 Phone: (805) 499-0335, Fax: (805) 499-8108 Email: [email protected], Website: www.optodiode.com Revision February 26, 2013