Xeon Power Pure White HV AC LED 3W 50V OSWWH2E3E1E VER.A.2 ■Features ■Outline ● Highest Luminous Flux ● Super Energy Efficiency ● Long Lifetime Operation ● Superior ESD protection ● LED cells connected in series Dimension 3.6 1 5 .1 1 ● Need extra resistor ● For high voltage/low current applications 2 2.0 BackView ● Read lights ● Lighting ● 1 5 . 2 5.5 ■Applications 6 .0 5 1. Other 2 . 0 14.5 ■Absolute Maximum Rating ■Directivity Symbol Value Unit AC Current I 60 mA Pulse Current* IP 100 mA Power Dissipation PD 3.1 W Operating Temperature Topr -30 ~ +85 Storage Temperature Tstg -40~ +100 Lead Soldering Temperature Tsol 260 *Pulse width Max.10ms AC Voltage ℃ ℃ ℃/5sec 30° 60° 90° 1 60° 0.5 0 0.5 - ■Applications (Ta=25℃ (Ta=25℃) Symbol Condition Min. Typ. Max. Unit V I=60mA 44 46 52 V I=60mA 160 170 - lm Luminous Flux Φv Color Temperature CCT I=60mA - 6500 - K Chromaticity x IF=60mA - 0.31 - - Coordinates* y IF=60mA - 0.33 - - 2θ1/2 IF=60mA - 140 - deg 50% Power Angle 0 30° Duty ratio max 1/10 ■Electrical -Optical Characteristics Item 5 0 . 1 Unit:mm Tolerance:±0.30mm (Ta=25℃) Item 2 1 0 Note: Don’t drive at rated current more than 5s without heat sink for Xeon 5 emitter series. LED & Application Technologies Diagram R AC ~ LED 1 90° Xeon Power Pure White HV AC LED 3W 50V OSWWH2E3E1E VER.A.2 ■ Handling of Silicone Lens LEDs Notes for handling of silicone lens LEDs ● Please do not use a force of over 3kgf impact or pressure on the silicone lens, otherwise it will cause a catastrophic failure. ● The LEDs should only be picked up by making contact with the sides of the LED body. ● Avoid touching the silicone lens especially by sharp tools such as Tweezers. ● Avoid leaving fingerprints on the silicone lens. ● Please store the LEDs away from dusty areas or seal the product against dust. ● When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the silicone lens must be prevented. ● Please do not mold over the silicone lens with another resin. (epoxy, urethane, etc) LED & Application Technologies