PPM20-E-xxELF PPM-SERIES Rev.04-2012 20 Watt Univ. 85-264VAC (120-370VDC) Single Output Over Voltage Protection (out) 3 kV AC I/O Isolation Low Ripple and Noise High Efficiency Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de [email protected] The PPM-Series are high efficiency green power moduls with various packaging provided by Peak. The features of this series are: wide input voltage, DC and AC all in one, high efficiency, high reliability, low loss, safety isolation etc. They are widely used in industrial, office and civil equipments. All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Input Specifications Input Voltage Range Input Frequency Input (Inrush) Current External Input Fuse (recommended) Output Specifications Voltage Accuracy Input variation Load variation (10-100%) Ripple and Noise (20Mhz bandwidth) Short Circuit Protection Over current protection Common Specifications Temperature range Power derating Case temperature Storage Hold up Time Humidity (non condensing) Temperature Coefficient Switching Frequency I/O Isolation Voltage Leakage current EMI / RFI conducted EMC compliance ESD RF EFT / bursts Surge Safety Standards Safety Approvals Safety Class Case Material Reliability Calculated MTBF (MIL-HDBK-217F) Weight 85 – 264 VAC or 120 – 370 VDC universal 47 – 440 Hz 110 VAC 230 VAC 370 mA (20A), typ. 240mA (40A), typ. 3.15A / 250V slow blow ±2%, typ (±3% at 3.3 Vout) ±0.5%, typ ±1% , typ 120mV pk-pk, max Continuous, auto resume > 110% Io, auto resume -40°C to +70 °C 2.5% / °C (above 40°C) +95°C (max) -40°C to +105 °C 50mS, typ. (230VAC) 95%, max. ± 0.02%/°C 100kHz, typ 3000VAC / 1min. 0.75mA, (max at Vin 240VAC) EN55022, level B EN55024/IEC/EN 61000-4-2 level 4 8kV/15kV EN55024/IEC/EN 61000-4-3 level 4 10V/m EN55024/IEC/EN 61000-4-4 level 4 4kV EN55024/IEC/EN 61000-4-5 level 4 2kV/4kV IEC60950, EN60950, UL60950 EN60950, UL60950 (pending) CLASS 2 UL94V-0 rated > 300,000 hrs ~ 50g PPM-Series – PPM20-E-xxELF – Single Output - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 1/3 Selection Guide Single Output Po Order # (W w er ) O lta t Vo u p t u V ge ( dc) Cu pu t O ut rren t d Loa F u ll ie Effic (m A ( ncy ) %) SINGLE OUTPUT PPM20-E-3R3ELF PPM20-E-05ELF PPM20-E-12ELF PPM20-E-15ELF PPM20-E-24ELF 11.8 18 20 20 20 3.3 5 12 15 24 3600 3600 1660 1330 833 74 78 82 83 83 If you need other specifications, please enquire. Package / Pinning / Derating 2 Bottom View 4 1 3 All dimensions are typical in millimeters (inches). - Pin diameter: 1.0 +/-0.10 (0.04 +/-0.004) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. 45.72 (1.80) 2" x 1" – PLASTIC CASE 53.50 (2.10) 6.00 (0.24) 23.50 (0.93) PEAK Modelcode Datecode # 1 2 3 4 PIN CONNECTIONS SINGLE AC (N) AC (L) + Vout - Vout PPM-Series – PPM20-E-xxELF – Single Output - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 2/3 App Notes: Measure Typical Applications PPM-Series External Typical Value Model C1 C2 PPM20-E-3R3ELF 220µF/10V 0.1µF/50V PPM20-E-05ELF 220µF/10V 0.1µF/50V PPM20-E-12ELF 120µF/25V 0.1µF/50V PPM20-E-15ELF 120µF/25V 0.1µF/50V PPM20-E-24ELF 68µF/25V 0.1µF/50V TVS P6KE6.8A P6KE6.8A P6KE20A P6KE20A P6KE30A Note 1.Output filtering capacitors C1 is electrolytic capacitors. It is recommended to use high frequency and low impedance electrolytic capacitors. For capacitance and current of capacitor, please refer to manufacture’s datasheet. Voltage derating of capacitor should be 80% or above. C2 is ceramic capacitor - it is used to filter high frequency noise. TVS is a recommended component to protect post-circuits (if converter fails). 2. External connect FUSE, recommended the parameter is 3.15A/250V slow blow. PPM-Series – PPM20-E-xxELF – Single Output - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 3/3