P8IU-xxxxELF - PEAK electronics GmbH

P8IU-xxxxELF
Mainzer Straße 151–153
D-55299 Nackenheim
Tel. +49 6135 7026-0
Fax: +49 6135 931070
www.peak-electronics.de
[email protected]
PMA-SERIES
Rev.11-2008
1.5 Watt
Unregulated
Single Output
SIP4 Case
3 kV DC I/O Isolation
Low Ripple and Noise
The PMA series P8IU-xxxxELF is a family of cost effective 1.5 W single
output DC/DC converters. These converters are in an ultra miniature SIP4
case. Devices are encapsulated. High performance features: 3000VDC
input/output isolation, high efficiency operation, output voltage accuracy of
±3% maximum, input range of ±10% tolerance and low output ripple and
noise.
All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified
Input Specifications
Voltage Range
Input Filter
Input Reflected Ripple Current¹
± 10%
Capacitors
20 mA pk-pk
Output Specifications
Voltage Accuracy
Short Circuit Protection
Line Regulation
Load Regulation (20% - 100%)
Ripple and Noise (20Mhz bandwidth)
Temperature Coefficient
± 3%
Short Term
± 1.2% / 1% Vin Change
± 10% (3.3Vout Models: ± 20%)
100 mV pk-pk
± 0.02% / °C
General Specifications
Efficiency
I/O Isolation Voltage (3 sec.)
I/O Isolation Capacity
I/O Isolation Resistance
Switching Frequency
Humidity
Reliability Calculated MTBF (MIL-HDBK-217F)
See Table
3000 VDC
60 pF, typ.
1000 MOhm
80 kHz (Variable)
95% rel H
> 1.121 Mhrs
Physical Specifications
Case Material
Potting Material
Weight
Non Conductive Black Plastic (UL94V-0 rated)
Epoxy (UL94V-0 rated)
~ 1.5g, typ.
Environment Specifications
Operating Temperature
Maximum Case Temperature
Storage Temperature
Cooling
RoHS Conform
-40 to +85°C (ambient)
100°C
-40 to +125°C
Free Air Convection
Soldering 260°C, max. (1.5mm from case 10s.)
PMA-Series – P8IU-xxxxELF – Single Output – SIP4 - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 1/3
Selection Guide
Single Output
)
)
A)
mA
(mA ad (m
ad (
)
o
d
L
a
C
)
o
l
o
L
D
F)²
C
L
ul
d (u
(VD
e (V
No
Full
nt F
)
a
g
t
t
e
e
o
a
n
n
r
%
g
t
r
(
L
l
e
e
rr
rr
lta
or
cy
Vo
Cu
t Vo
t Cu put Cu
acit
put
put
cien
Inpu
Inpu
In
Out
Out
Effi
Cap
Order #
SINGLE OUTPUT
P8IU-053R3ELF
P8IU-0505ELF
P8IU-057R2ELF
P8IU-0509ELF
P8IU-0512ELF
P8IU-0515ELF
P8IU-0518ELF
P8IU-0524ELF
P8IU-123R3ELF
P8IU-1205ELF
P8IU-127R2ELF
P8IU-1209ELF
P8IU-1212ELF
P8IU-1215ELF
P8IU-1218ELF
P8IU-1224ELF
P8IU-243R3ELF
P8IU-2405ELF
P8IU-247R2ELF
P8IU-2409ELF
P8IU-2412ELF
P8IU-2415ELF
P8IU-2418ELF
P8IU-2424ELF
P8IU-483R3ELF
P8IU-4805ELF
P8IU-487R2ELF
P8IU-4809ELF
P8IU-4812ELF
P8IU-4815ELF
P8IU-4818ELF
P8IU-4824ELF
5
5
5
5
5
5
5
5
12
12
12
12
12
12
12
12
24
24
24
24
24
24
24
24
48
48
48
48
48
48
48
48
30
30
30
30
30
30
30
30
15
15
15
15
15
15
15
15
10
10
10
10
10
10
10
10
6
6
6
6
6
6
6
6
361
400
400
400
384
384
384
379
148
168
166
166
166
162
162
162
73
83
83
83
82
82
82
79
36
41
41
41
40
40
40
40
3.3
5
7.2
9
12
15
18
24
3.3
5
7.2
9
12
15
18
24
3.3
5
7.2
9
12
15
18
24
3.3
5
7.2
9
12
15
18
24
400
300
208
167
125
100
83
62.5
400
300
208
167
125
100
83
62.5
400
300
208
167
125
100
83
62.5
400
300
208
167
125
100
83
62.5
73
75
75
75
78
78
78
79
74
74
75
75
75
77
77
77
75
75
75
75
76
76
76
79
75
76
76
76
77
77
77
78
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
If you need other specifications, please enquire.
PMA-Series – P8IU-xxxxELF – Single Output – SIP4 - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 2/3
1.25
(0.05)
Package / Pinning / Derating
1
2
3
4
All dimensions are typical in millimeters (inches).
- Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002)
- Pin pitch tolerance: +/-0.35 (+/-0.014)
- Case tolerance +/-0.5 (+/-0.02)
Specification may change without notice.
Bottom View
0.50
(0.02)
9.65
(0.38)
11.68
(0.46)
6.00*
(0.24)*
PEAK
Modelcode
Datecode
2
3
4
0.50
(0.02)
1
* The thickness
of 48Vin voltage
is 7.50 (0.29)
3.05
(0.12)
0.25
(0.01)
0.50
(0.02)
2.54
(0.10)
0.50
(0.02)
SIP4 – PLASTIC CASE
PIN CONNECTIONS
#
SINGLE
1 - Vin
2 +Vin
3 - Vout
4 +Vout
App Notes:
¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH.
² = Tested by minimal Vin and constant resistive load.
- Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications.
PMA-Series – P8IU-xxxxELF – Single Output – SIP4 - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 3/3