Ordering number : EN6344C CPH3115/CPH3215 Bipolar Transistor http://onsemi.com (–)30V, (–)1.5A, Low VCE(sat), (PNP)NPN Single CPH3 Applications • Relay drivers, lamp drivers, motor drivers, and strobes Features • • • • • • • Adoption of MBIT processes Large current capacity Low collector-to-emitter saturation voltage High-speed switching Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm) High allowable power dissipation Halogen free compliance Specifications ( ): CPH3115 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Conditions Ratings VCBO VCEO Collector-to-Emitter Voltage Emitter-to-Base Voltage Unit (--30)40 V (--)30 V (--)5 V (--)1.5 A Collector Current (Pulse) VEBO IC ICP Base Current IB (--)300 Collector Dissipation Junction Temperature PC Tj Storage Temperature Tstg Collector Current (--)3 When mounted on ceramic substrate (600mm2×0.8mm) A mA 0.9 W 150 °C --55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7015A-003 • Package : CPH3 • JEITA, JEDEC : SC-59, TO-236, SOT-23 • Minimum Packing Quantity : 3,000 pcs./reel LOT No. 1.6 2.8 0.05 CQ Marking 0.2 3 Packing Type: TL LOT No. CPH3115-TL-E CPH3215-TL-E CPH3115-TL-H CPH3215-TL-H 0.15 AQ 0.6 2.9 0.9 0.2 0.6 TL 1 0.95 CPH3115 2 0.4 1 : Base 2 : Emitter 3 : Collector CPH3 Electrical Connection 3 1 CPH3115 Semiconductor Components Industries, LLC, 2013 September, 2013 CPH3215 3 1 2 CPH3215 2 91912 TKIM TB-00000307/21000 TS(KOTO) TA-2681 No.6344-1/7 CPH3115 / CPH3215 Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO VCB=(--)30V, IE=0A VEB=(--)4V, IC=0A Gain-Bandwidth Product hFE fT VCE=(--)2V, IC=(--)100mA VCE=(--)10V, IC=(--)300mA Output Capacitance Cob Collector-to-Emitter Saturation Voltage VCE(sat) VBE(sat) VCB=(--)10V, f=1MHz IC=(--)750mA, IB=(--)15mA Emitter Cutoff Current DC Current Gain Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage V(BR)CBO V(BR)CEO Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-On Time Storage Time Fall Time Ratings Conditions min IE=(--)10μA, IC=0A tstg tf See specified Test Circuit. Unit max 200 (--)0.1 μA (--)0.1 μA 560 (450)500 MHz (9)8 IC=(--)750mA, IB=(--)15mA IC=(--)10μA, IE=0A IC=(--)1mA, RBE=∞ V(BR)EBO ton typ pF (--250)150 (--375)225 (--)0.85 (--)1.2 mV V (--30)40 V (--)30 V (--)5 V 35 ns (115)205 ns 30 ns Switching Time Test Circuit IB1 PW=20μs DC≤1% IB2 OUTPUT INPUT RB VR RL + 50Ω + 100μF 470μF VBE= --5V VCC=12V IC=20IB1= --20IB2=750mA (For PNP, the polarity is reversed.) Ordering Information Package Shipping memo CPH3115-TL-E CPH3 3,000pcs./reel Pb Free CPH3215-TL-E CPH3 3,000pcs./reel Pb Free CPH3115-TL-H CPH3 3,000pcs./reel Pb Free and Halogen Free CPH3215-TL-H CPH3 3,000pcs./reel Pb Free and Halogen Free IC -- VCE 2.0 --50mA --40mA --30mA Collector Current, IC -- A --1.8 --1.6 --1.4 --20mA --1.2 --8mA --1.0 --10mA --6mA --4mA --0.8 --0.6 --2mA --0.4 --0.2 IC -- VCE CPH3215 1.8 A 20mA 30m 40mA 1.6 A CPH3115 Collector Current, IC -- A --2.0 1.4 8mA 50m Device 1.2 10mA 6mA 1.0 4mA 0.8 2mA 0.6 0.4 0.2 IB=0 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Collector-to-Emitter Voltage, VCE -- V --0.9 --1.0 IT01673 IB=0 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Collector-to-Emitter Voltage, VCE -- V 0.9 1.0 IT01674 No.6344-2/7 CPH3115 / CPH3215 IC -- VBE --0.8 --0.6 --0.4 --0.2 --0.2 --0.4 --0.6 --0.8 --1.0 Base-to-Emitter Voltage, VBE -- V 0.4 0 DC Current Gain, hFE 100 7 5 Ta=75°C 3 25°C --25°C 2 5 2 2 3 5 7 --1.0 2 Collector Current, IC -- A 10 0.01 3 CPH3115 VCE= --10V 5 7 2 0.1 3 5 7 Gain-Bandwidth Product, f T -- MHz 7 5 3 2 100 7 5 2 1.0 Collector Current, IC -- A 3 IT01678 f T -- IC CPH3215 VCE=10V 2 1000 1000 7 5 3 2 100 7 5 3 3 2 3 5 7 --0.1 2 3 5 Collector Current, IC -- A 2 0.01 7 --1.0 2 IT01679 3 5 7 2 0.1 3 5 Output Capacitance, Cob -- pF 3 2 10 7 5 3 2 1.0 IT01680 CPH3215 f=1MHz 7 5 7 Cob -- VCB 100 CPH3115 f=1MHz 7 2 Collector Current, IC -- A Cob -- VCB 100 2 0.1 3 3 2 2 --0.01 2 IT01677 f T -- IC 3 CPH3215 VCE=2V 7 3 7 --0.1 1.2 IT01676 100 2 5 1.0 hFE -- IC 5 3 3 0.8 7 25°C --25°C 2 0.6 1000 3 10 --0.01 0.4 Base-to-Emitter Voltage, VBE -- V Ta=75°C 2 0.2 IT01675 CPH3115 VCE= --2V 7 DC Current Gain, hFE 0.6 --1.2 hFE -- IC 1000 Gain-Bandwidth Product, f T -- MHz 0.8 0 0 Output Capacitance, Cob -- pF 1.0 0.2 0 5 1.2 C 25°C --25°C --1.0 CPH3215 VCE=2V 1.4 Collector Current, IC -- A --1.2 Ta=7 5°C 25°C --25°C Collector Current, IC -- A --1.4 IC -- VBE 1.6 CPH3115 VCE= --2V Ta=75 ° --1.6 5 3 2 10 7 5 3 2 3 5 7 1.0 2 3 5 7 10 Collector-to-Base Voltage, VCB -- V 2 3 5 IT01681 2 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 Collector-to-Base Voltage, VCB -- V 2 3 5 IT01682 No.6344-3/7 CPH3115 / CPH3215 VCE(sat) -- IC --1.0 5 3 2 --0.1 7 5 3 2 --0.01 --0.01 2 3 5 25 7 --0.1 °C 2 3 5 7 --1.0 Collector Current, IC -- A --1.0 3 2 --0.1 7 75°C 5 C 25° C ° Ta= --25 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A Ta= --25°C 7 75°C 25°C 3 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 1m s ms 10 DC 10 0m op s er 3 2 0.1 ati on Ta=25°C Single pulse Mounted on a ceramic board (600mm2×0.8mm) For PNP, minus sign is omitted. 2 3 3 5 7 1.0 2 3 IT01684 5 3 2 0.1 7 5 C 75° 3 °C 25 5°C 2 Ta= -- 2 2 3 5 7 2 0.1 3 5 7 2 1.0 3 IT01686 VBE(sat) -- IC CPH3215 IC / IB=50 5 3 2 1.0 Ta= --25°C 7 75°C 5 25°C 3 2 2 3 5 7 2 0.1 3 5 7 2 1.0 Collector Current, IC -- A 3 IT01688 PC -- Ta 1.4 Collector Dissipation, PC -- W IC=1.5A 1.0 7 5 0.01 2 CPH3115 / CPH3215 1.2 s 0μ 10 s 0μ 50 Collector Current, IC -- A ICP=3A 3 2 7 0.1 CPH3215 IC / IB=50 IT01687 CPH3115 / CPH3215 0.1 7 5 5 VCE(sat) -- IC 0.1 0.01 3 ASO 2 3 °C Collector Current, IC -- A Base-to-Emitter Saturation Voltage, VBE(sat) -- V 2 3 2 25 7 3 10 7 5 C 75° Ta= °C --25 2 10 5 2 3 0.01 0.01 3 CPH3115 IC / IB=50 --0.1 --0.01 5 IT01685 7 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 2 VBE(sat) -- IC --10 5 7 7 5 --1.0 0.1 1.0 7 2 2 Collector Current, IC -- A VCE(sat) -- IC --0.01 --0.01 3 IT01683 CPH3115 IC / IB=50 3 5 0.01 0.01 3 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 2 2 CPH3215 IC / IB=20 7 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 7 C 75° Ta= °C --25 VCE(sat) -- IC 1.0 CPH3115 IC / IB=20 5 7 1.0 2 3 5 7 10 2 1.0 0.9 Mo un 0.8 ted on ac era 0.6 mi 0.4 cb oa rd (60 0m m2 ×0 .8 0.2 mm ) 0 3 Collector-to-Emitter Voltage, VCE -- V 5 7 100 IT01689 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT01690 No.6344-4/7 CPH3115 / CPH3215 Embossed Taping Specification CPH3115-TL-E, CPH3215-TL-E, CPH3115-TL-H, CPH3215-TL-H No.6344-5/7 CPH3115 / CPH3215 Outline Drawing Land Pattern Example CPH3115-TL-E, CPH3215-TL-E, CPH3115-TL-H, CPH3215-TL-H Mass (g) Unit 0.013 mm * For reference Unit: mm 2.4 1.4 0.6 0.95 0.95 No.6344-6/7 CPH3115 / CPH3215 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.6344-7/7