Ordering number : EN7225B CPH6122 Bipolar Transistor –30V, –3A, Low VCE(sat), PNP Single CPH6 http://onsemi.com Applications • Relay drivers, lamp drivers, motor drivers, flash Features • • • • • • Adoption of MBIT process High current capacitance Low collector-to-emitter saturation voltage High-speed switching Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm) High allowable power dissipation Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Conditions Ratings -30 V -30 V VEBO IC -5 V -3 A ICP IB Base Current Collector Dissipation Unit VCBO VCEO Junction Temperature PC Tj Storage Temperature Tstg -5 -600 Mounted on a ceramic board (600mm2×0.8mm) A mA 1.3 W 150 °C -55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Product & Package Information unit : mm (typ) 7018A-002 • Package : CPH6 • JEITA, JEDEC : SC-74, SOT-26, SOT-457 • Minimum Packing Quantity : 3,000 pcs./reel 5 CPH6122-TL-E 0.15 2.9 6 4 Packing Type: TL Marking 0.9 1 2 0.95 LOT No. AW 0.05 1.6 0.2 0.6 2.8 0.2 0.6 Package Dimensions TL 3 0.4 1 : Collector 2 : Collector 3 : Base 4 : Emitter 5 : Collector 6 : Collector CPH6 Electrical Connection 1, 2, 5, 6 3 4 Semiconductor Components Industries, LLC, 2013 September, 2013 62012 TKIM/O1106EA SYIM/72602 TSIM TA-100026 No.7225-1/6 CPH6122 Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO hFE Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage VCE= -2V, IC= -500mA VCE= -10V, IC= -500mA VCE(sat)1 VCB= -10V, f=1MHz IC= -1.5A, IB= -30mA VCE(sat)2 VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO ton Emitter-to-Base Breakdown Voltage Turn-On Time Storage Time typ max 200 Unit -0.1 μA -0.1 μA 560 400 MHz 25 pF -180 -270 mV IC= -1.5A, IB= -75mA -120 -180 mV IC= -1.5A, IB= -30mA -0.83 -1.2 V IC= -10μA, IE=0A IC= -1mA, RBE=∞ -30 V -30 V IE= -10μA, IC=0A -5 V 50 tstg tf Fall Time min VCB= -30V, IE=0A VEB= -4V, IC=0A fT Cob Output Capacitance Ratings Conditions See specified Test Circuit. ns 270 ns 27 ns Switching Time Test Circuit IB1 PW=20μs D.C.≤1% INPUT OUTPUT IB2 RB VR 24Ω 50Ω + + 100μF VBE=5V 470μF VCC= --12V --20IB1=20IB2=IC= --500mA Ordering Information Device CPH6122-TL-E Shipping memo CPH6 3,000pcs./reel Pb Free IC -- VCE --2.5 --6mA --1.2 --4mA --1.0 --0.8 --2mA --0.6 --0.4 --2.0 --1.5 C 25°C --25°C --8mA --50m --1.4 VCE= --2V --10mA Ta=75 ° A mA 0 --2 A --1.6 IC -- VBE --3.0 Collector Current, IC -- A --4 0 --1.8 --3 0m mA --2.0 Collector Current, IC -- A Package --1.0 --0.5 --0.2 IB=0mA 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Collector-to-Emitter Voltage, VCE -- V --0.9 --1.0 IT04554 0 0 --0.2 --0.4 --0.6 --0.8 Bass-to-Emitter Voltage, VBE -- V --1.0 IT04555 No.7225-2/6 CPH6122 hFE -- IC Ta=75°C 3 25°C --25°C 2 100 7 5 3 2 10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Cob -- VCB 100 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Output Capacitance, Cob -- pF 3 2 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 2 7 2 --10 Collector-to-Base Voltage, VCB -- V 7 5 3 2 C 25° C 75° Ta= 5°C --2 2 --10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 10 0m ms --1.0 7 5 DC 3 s op era 2 tio Collector Dissipation, PC -- W Collector Current, IC -- A 10 2 n --0.1 7 5 3 2 Ta=25°C Single pulse Mounted on a ceramic board (600mm2✕0.8mm) --0.01 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 Collector-to-Emitter Voltage, VCE -- V 5 C 5° =7 a T C 5° --2 --100 7 5 3 2 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 IT04559 VBE(sat) -- IC IC / IB=50 --1.0 °C Ta= --25 ° 5 2 C 75°C 7 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 IT04561 PC -- Ta 1.2 s s 0μ 0μ 50 s 3 IT04557 1.3 10 3 2 Collector Current, IC -- A <50μs 1m 7 --1.0 2 1.4 ICP= --5A IC= --3A 5 3 ASO --10 7 5 3 5 5 --0.01 5 7 --10 IT04560 Collector Current, IC -- A 2 IC / IB=20 2 --1000 3 7 --0.1 Collector Current, IC -- A VCE(sat) -- IC 7 5 5 IT04558 IC / IB=50 --100 3 VCB(sat) -- IC --10 --0.01 3 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 3 5 2 7 5 3 100 --1000 7 2 2 Collector Current, IC -- A f=1MHz 10 --1.0 3 7 --0.01 5 7 --10 IT04556 Collector Current, IC -- A VCE= --10V °C 5 Gain-Bandwidth Product, FT -- MHz DC Current Gain, hFE 7 fT -- IC 5 VCE= --2V 25 1000 M ou nt 1.0 ed on ac er 0.8 am ic bo ar 0.6 d (6 00 m 0.4 m2 ✕ 0. 8m m ) 0.2 0 3 5 IT04562 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT04563 No.7225-3/6 CPH6122 Embossed Taping Specification CPH6122-TL-E No.7225-4/6 CPH6122 Outline Drawing CPH6122-TL-E Land Pattern Example Mass (g) Unit 0.015 mm * For reference Unit: mm 2.4 1.4 0.6 0.95 0.95 No.7225-5/6 CPH6122 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.7225-6/6