Ordering number : EN6611B MCH6103/MCH6203 Bipolar Transistor http://onsemi.com (–)50V, (–)1A, Low VCE(sat), (PNP)NPN Single MCPH6 Applicaitons • Relay drivers, lamp drivers, motor drivers, flash Features • • • • • Large current capacity Adoption of MBIT processes • High-speed switching Low collector-to-emitter saturation voltage Ultrasmall package facilitates miniaturization in end products (mounting height : 0.85mm) High allowable power dissipation Specifications ( ) : MCH6103 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Conditions Ratings Unit VCBO VCES (--50)80 V (--50)80 V VCEO (--)50 V VEBO (--)5 V Continued on next page. Package Dimensions Product & Package Information unit : mm (typ) 7022A-007 • Package : MCPH6 • JEITA, JEDEC : SC-88, SC-70-6, SOT-363 • Minimum Packing Quantity : 3,000 pcs./reel 6 5 4 0 to 0.02 1 2 3 0.65 TL 0.3 Marking 0.85 0.25 Packing Type: TL 4 MCPH6 AC MCH6103 CC MCH6203 Electrical Connection 1, 2, 5, 6 3 1, 2, 5, 6 3 4 MCH6103 Semiconductor Components Industries, LLC, 2013 September, 2013 LOT No. 5 3 LOT No. 6 2 LOT No. 1 1 : Collector 2 : Collector 3 : Base 4 : Emitter 5 : Collector 6 : Collector LOT No. 0.07 MCH6103-TL-E MCH6203-TL-E 0.15 2.1 1.6 0.25 2.0 4 MCH6203 80812 TKIM/D1004 TSIM TB-00000351/N2000TS (KOTO) TA-2974 No.6611-1/8 MCH6103/MCH6203 Continued from preceding page. Parameter Symbol Collector Current Conditions Ratings Unit IC ICP (--)1.0 (--)3 A 200 mA Collector Dissipation IB PC Junction Temperature Tj Storage Temperature Tstg Collector Current (Pulse) Base Current When mounted on ceramic substrate (600mm2×0.8mm) A 1.0 W 150 °C --55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO hFE Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-On Time Storage Time Fall Time Ratings min typ VCB=(--)40V, IE=0A VEB=(--)4V, IC=0A VCE=(--)2V, IC=(--)100mA fT Cob Output Capacitance Conditions VCE(sat)1 VCE(sat)2 200 Unit (--)0.1 μA (--)0.1 μA 560 VCE=(--)10V, IC=(--)300mA 420 VCB=(--)10V, f=1MHz IC=(--)500mA, IB=(--)10mA (9)6 IC=(--)300mA, IB=(--)6mA IC=(--)500mA, IB=(--)10mA max MHz pF (--280)130 (--430)190 mV (--145)90 (--220)135 mV (--)0.81 (--)1.2 VBE(sat) V(BR)CBO IC=(--)10μA, IE=0A (--50)80 V V V(BR)CES IC=(--)100μA, RBE=0Ω (--50)80 V V(BR)CEO IC=(--)1mA, RBE=∞ (--)50 V V(BR)EBO ton IE=(--)10μA, IC=0A (--)5 tstg tf See specified Test Circuit. V (36)38 ns (173)332 ns (28)40 ns Switching Time Test Circuit IB1 PW=20μs D.C.≤1% INPUT OUTPUT IB2 VR RB RL 50Ω 50Ω + 100μF VBE= --5V + 470μF VCC=25V IC=20IB1= --20IB2=500mA For PNP, the polarity is reversed. Ordering Information Package Shipping MCH6103-TL-E Device MCPH6 3,000pcs./reel MCH6203-TL-E MCPH6 3,000pcs./reel memo Pb Free No.6611-2/8 MCH6103/MCH6203 IC -- VCE MCH6103 0 --4 mA mA --20 30mA 40mA --8m A 0.8 A --10m A --6m --0.6 --4mA --2mA --0.4 --1mA --0.2 0 --200 --400 --600 --800 1mA 0.2 600 800 1000 IT01891 IC -- VBE 1.0 MCH6203 VCE=2V 0.9 Collector Current, IC -- A 0.8 --0.3 --0.2 0.5 0.4 0.3 0.2 --25°C --0.4 25°C --25°C --0.5 0.6 C --0.6 0.7 25°C --0.7 Ta=75° C Collector Current, IC -- A 400 Collector-to-Emitter Voltage, VCE -- mV --0.1 0.1 0 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 Base-to-Emitter Voltage, VBE -- V 0 5 --25°C 2 7 100 7 5 7 5 2 7 --0.1 2 3 5 Collector Current, IC -- A --1.0 IT01894 VCE(sat) -- IC --1000 7 5 3 2 --100 7 75°C Ta= °C --25 3 25°C 2 --10 --0.01 2 3 5 7 --0.1 2 2 3 3 Collector Current, IC -- A 5 7 --1.0 IT01896 5 7 2 0.1 3 5 Collector Current, IC -- A 7 1.0 IT01895 VCE(sat) -- IC 1000 MCH6103 IC / IB=20 5 10 0.01 7 MCH6203 IC / IB=20 7 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 5 MCH6203 VCE=2V 25°C 100 3 3 1.0 IT01893 2 2 2 0.8 --25°C 3 3 10 --0.01 Ta=75°C 5 DC Current Gain, hFE 3 0.6 hFE -- IC 1000 25°C Ta=75°C 0.4 Base-to-Emitter Voltage, VBE -- V MCH6103 VCE= --2V 7 0.2 IT01892 hFE -- IC 1000 DC Current Gain, hFE 200 IT01890 --0.8 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV IB=0 0 0 MCH6103 VCE= --2V --0.9 4mA 2mA IC -- VBE --1.0 6mA 0.4 --1000 Collector-to-Emitter Voltage, VCE -- mV 8mA 0.6 IB=0 0 10mA 20mA Ta=75 ° Collector Current, IC -- A MCH6203 --3 --0.8 IC -- VCE 1.0 0mA Collector Current, IC -- A --1.0 5 3 2 100 7 5°C 5 7 Ta= 3 5 --2 °C 25°C 2 10 0.01 2 3 5 7 0.1 2 3 Collector Current, IC -- A 5 7 1.0 IT01897 No.6611-3/8 MCH6103/MCH6203 VCE(sat) -- IC 3 2 --1000 7 5 5°C Ta=7 C --25° --100 7 5 25°C 3 2 2 --0.01 3 5 7 2 --0.1 3 5 Collector Current, IC -- A 100 7 5 5°C Ta=7 C --25° 3 25°C 5 3 2 Ta= --25°C 7 75°C 25°C 3 2 --100 --0.01 2 3 5 7 2 --0.1 3 5 Collector Current, IC -- A --1.0 IT01900 7 2 0.1 3 5 3 2 1000 Ta= --25°C 7 5 75°C 25°C 3 2 2 3 5 7 2 0.1 3 Output Capacitance, Cob -- pF 7 5 3 2 10 7 5 5 3 7 1.0 IT01901 Cob -- VCB MCH6203 f=1MHz 3 100 7 1.0 IT01899 MCH6203 IC / IB=50 7 5 2 5 Collector Current, IC -- A MCH6103 f=1MHz 3 5 VBE(sat) -- IC 100 0.01 7 Cob -- VCB 5 3 10000 7 5 2 Collector Current, IC -- A Base-to-Emitter Saturation Voltage, VBE(sat) -- mV Base-to-Emitter Saturation Voltage, VBE(sat) -- mV --1.0 IT01898 MCH6103 IC / IB=50 --1000 Output Capacitance, Cob -- pF 3 2 10 0.01 7 VBE(sat) -- IC --10000 2 100 7 5 3 2 10 7 5 3 2 3 5 7 --1.0 2 3 5 7 --10 2 Collector-to-Base Voltage, VCB -- V 3 2 0.1 5 5 3 2 100 2 3 5 7 --0.1 2 3 Collector Current, IC -- A 3 5 7 --1.0 IT01904 5 7 1.0 2 3 5 7 10 2 Collector-to-Base Voltage, VCB -- V 3 5 IT01903 f T -- IC 1000 Gain-Bandwidth Product, f T -- MHz MCH6103 VCE= --10V 7 2 IT01902 f T -- IC 1000 Gain-Bandwidth Product, f T -- MHz 3 2 2 --10 --0.01 MCH6203 IC / IB=50 1000 7 5 3 2 2 --0.1 VCE(sat) -- IC 10000 7 5 MCH6103 IC / IB=50 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV --10000 7 5 MCH6203 VCE=10V 7 5 3 2 100 0.01 2 3 5 7 0.1 2 3 Collector Current, IC -- A 5 7 1.0 IT01905 No.6611-4/8 MCH6103/MCH6203 ASO 3 MCH6103 / MCH6203 50 0μ s 10 m 10 s 0m s 1ms DC op er ati on ICP=3A s Collector Current, IC -- A IC=1A 0μ 1.0 10 2 7 5 3 2 0.1 7 5 3 2 Ta=25°C Single pulse For PNP, minus sign is omitted. Mounted on a ceramic board (600mm2✕0.8mm) 0.01 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 Collector-to-Emitter Voltage, VCE -- V PC -- Ta 1.4 MCH6103 / MCH6203 1.2 Collector Dissipation, PC -- W 5 M 1.0 ou nte do na 0.8 ce ram ic 0.6 bo ard (6 00 mm 0.4 2 ✕0 0.2 .8m m) 0 5 7 100 IT01906 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT01907 No.6611-5/8 MCH6103/MCH6203 Embossed Taping Specification MCH6103-TL-E, MCH6203-TL-E No.6611-6/8 MCH6103/MCH6203 Outline Drawing MCH6103-TL-E, MCH6203-TL-E Land Pattern Example Mass (g) Unit 0.008 mm * For reference Unit: mm 2.1 0.6 0.4 0.65 0.65 No.6611-7/8 MCH6103/MCH6203 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.6611-8/8