F E D C B A 33,32 +- 0,13 0,12 (5:1) 9,6 `0,1 6,86 `0,1 n1 +- 0,1 0 (15x) 4,5 n3,1 `0,1 (2x) 0,5 D 10,25 +- 0,5 0,2 1,37 `0,1 2,84 `0,1 1 1,42 `0,1 4,11 `0,1 D 2,74 `0,1 P.C.B. HOLE DRILLINGS (P.C.B. TOP SIDE) 0,12 0,9 8,23 `0,1 6 +- 0,18 5,49 `0,1 C 12,6 +- 0,33 0,43 39,22 +- 0,3 0,46 8,26 +- 0,22 0,03 33,32 +- 0,13 0,12 25,17 +- 0,2 0,05 C 10° 2,55 n0,6 `0,05 (15x) 241o10220X CONEC ABC 4-40 UNC B B SEE NOTE 10 NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 260°C FOR 5 SEC. AND SOLDER PREHEAT 100°C FOR 30 SEC.) 2. METALSHELLS: STEEL; min. 315µin TIN over 40-80µin NICKEL 3. INSULATOR: HIGH TEMPERATURE PLASTIC UL 94 V-0, BLACK 4. CONTACTS: COPPER ALLOY; PLATING (SEE PART NO.): o PLEASE ADD A for GOLD FLASH over NICKEL (PREFERRED TYPE) o PLEASE ADD B for 20µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD C for 30µin HARD GOLD over min. 50µin NICKEL CONTACTS TAILS PRETINNED 5. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 6. COLLARS: COPPER ALLOY; min 200µin TIN over 80µin NICKEL 7. DIELECTRIC WITHSTANDING VOLTAGE: 424 VDC 8. CAPACITANCE: 830pF `20% 9. MAXIMUM TORQUE VALUE FOR THREAD: 6 in. LB 10. CONNECTOR IS PART MARKED: 241o10220X CONEC ABC (see note 4) Directive 2002/95/EC RoHS compliant F E DO NOT ALTER CAD DRAWING BY HAND A THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH 11,25 27,5 `0,3 scale: material: tolerance 2:1 (5:1) SEE NOTES dim. in mm date drawn 29.10.13 A title: name D-SUB FILTER MALE Henneboel appd. 30.10.13 Lehmenkühler norm d-old 15pos. SOLDER PIN STRAIGHT with threaded insert dwg no: 24K1A1471 R a Original rev. description D date part no: name C B 241o10220X DINA3 sh: 1 (see note 4) A