F E D C NOTES: B A AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 240°C FOR 5sec./ AND SOLDER PREHEAT 120°C FOR 120 SEC.) 2. METALSHELLS: STAINLESS STEEL 3. INSULATORS: PBT GF UL 94 V-0, BLACK (5:1) 4. CONTACTS: COPPER ALLOY D PLATING: 30µin HARD GOLD over min. 50µin NICKEL D 5. THREADED SPACER CLIPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL SEALING COMPOUND 8,9 +- 0,1 0,5 PCB-HOLE: n3.1`0.1; PCB THICKNESS 1.6mm 6. COLLARS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 7. FRAME: ZINC DIE CAST; NICKEL PLATED 8. HEXLOCKING SCREWS: STAINLESS STEEL b 9. O-RING: SILICON; BLUE 10. SEALING COMPOUND: PUR; BLUE 11. P.C.B. HOLE DRILLINGS + RECOMMENDED PANEL CUT OUT SEE SHEET 2 12. RECOMMENDED TORQUE FOR MOUNTING SCREW 3,6 +- 0,25 0 5,73 +- 0,17 0,08 35Ncm (3.1 in.LB) / max. 40Ncm (3.5 in.LB) 13. CONNECTOR IS PART MARKED: 8HDD15SCR99E10X CONEC ABC 39,4 +- 0,3 0 0,02 8 +- 0,23 0,12 25 +- 0,13 C C 21,1 +- 0,3 0 16,41 +- 0,05 0,2 5 `0,25 n0,65 `0,05 (15x) B 8HDD15SCR99E10X CONEC ABC O-RING B SEE NOTE 7 SEE NOTE 13 4,6 9,4 M3 7,9 `0,3 10° SW 4,75 Directive 2002/95/EC RoHS compliant F E DO NOT ALTER CAD DRAWING BY HAND A THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH M3 scale: material: tolerance 2:1 (5:1) SEE NOTES dim. in mm date name drawn 26.01.12 Henneboel D-SUB HD FEMALE appd. 26.01.12 Fischer 15pos. SOLDER PIN STRAIGHT with threaded spacer clip and hexlocking screw dwg no: DIN- norm d-old 1xb Ä4226 a Original rev. description D A title: 16.02.2012 K.H. date name part no: C A3 15K1A996 R B sh: 1/2 8HDD15SCR99E10X A F E D C B A P.C.B. HOLE DRILLINGS (P.C.B. TOP SIDE) D D 10,287 `0,05 5,456 `0,01 7,039 `0,03 n3,1 `0,1 (2x) 2,286 `0,1 1,143 `0,1 1,98 `0,1 n0,9 +- 0,1 0 (15x) 25 +- 0,12 0,13 C 1,98 `0,1 1 C RECOMMENDED PANEL CUT-OUT 20,5 `0,1 i 0,26 A B B 10°`1° E DO NOT ALTER CAD DRAWING BY HAND 25 `0,1 THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH F i 0,26 B 0,13 A 4` R3, n3,1 `0,05 (2x) 11,4 `0,1 B A scale: material: tolerance 3:1 see sheet 1 dim. in mm date name drawn 26.01.12 Henneboel P.C.B. HOLE DRILLINGS appd. 26.01.12 Fischer PANEL CUT-OUT Female 15pos. HD Solder pin straight dwg no: DIN- norm d-old 1xb Ä4226 a Original rev. description D A title: 16.02.2012 K.H. date name part no: C A3 15K1A996 R B sh: 2/2 SEE SHEET 1 A