GAS SYSTEM SERIES 400 NATURAL GAS 480V / 60 Hz* SYSTEM RATINGS Natural gas genset without heat extraction MTU Onsite Energy Type Former Genset Type GB 358 N6 AoE 3042 Z6 Output Elec.1) Therm.2) Low Temp.4) kWel. kBTU/hr kBTU/hr (°F) 358 (877) --- Energy input5) kBTU/hr 3347 Efficiency Electr. Total nel. (%) ntot (%) 36.5 (62.7) Methane number6) Energy input5) kBTU/hr 3347 Efficiency Electr. Total nel. (%) ntot (%) 36.5 62.7 Methane number6) ≥ 70 Dimensions (L x W x H) in 155.1 x 66.5 x 83.9 Natural gas genset with heat extraction from jacket water MTU Onsite Energy Type Former Genset Type GR 358 N6 AE 3042 Z6 Output Elec.1) Therm.2) Low Temp.4) kWel. kBTU/hr kBTU/hr (°F) 358 877 --- ≥ 70 Dimensions (L x W x H) in 155.1 x 66.5 x 83.9 Natural gas genset with heat extraction from jacket water and exhaust gas (Cogeneration Module 194°/158°F) MTU Onsite Energy Type Former CHP Type GC 128 N6** GC 248 N6** GC 358 N6 ME3066D3** ME3042D3** ME3042Z6 Output Elec.1) Therm.3) Low Temp.4) kWel. kBTU/hr kBTU/hr (°F) 128 730 --248 1445 --358 1791 --- Energy input5) kBTU/hr 1283 2495 3347 Efficiency Electr. Total nel. (%) ntot (%) 34.0 91.0 33.9 91.8 36.5 90.0 Methane number6) ≥ 70 ≥ 70 ≥ 70 * NOx < 1 g/bhp-hr ** =1 with 3-Way-Catalyst, NOx < 0.5 g/bhp-hr 1) Rated power at nominal voltage, power factor = 1 and nominal frequency 2) from jacket water, tolerance 8% 3) from jacket water and exhaust gas, tolerance 8% 4) data only provided for external gas mixture cooler 5) performance data in accordance with ISO 3046/I-1991, tolerance 5% 6) referenced methane number All data according to full load, indicated gas mixture cooler water inlet temperature and are subject to technical development. Project specific data on request: - Other gas types - Container - Individual data (e.g. flow-/return-temperatures, hot cooling, methane number, assembly space, etc.) - Gas Processing Dimensions (L x W x H) in 143.7 x 37.8 x 73.8 144.9 x 72.0 x 87.4 150.4 x 72.4 x 89.0 DS EMA 1 M12*1.5 H DRAWINGS AND DIMENSIONS SS 93.25114-0067 93.25114-0067 TP65-230/2/50Hz L B Note: This drawing is provided for reference only and should not be used for planning installation. ENGINE DATA in-line 6 130/155 mm (5.12/6.10 in) 2.06 lit. (126 cu in) 1800 rpm DESIGN AND EQUIPMENT (EXTRACT) // Sliding gear starter 24V // Flexible coupling, interconnecting bell housing, service opening so // // // // // that replacement of the rubber element can be achieved without displacing engine o generator Gas supply through venturi air-gas mixer with electronically controlled gas metering valve Components of the gas regulation line approved per Directive for Gas Components 90/356/EWG Electronic high-voltage capacitor ignition system with one ignition coil per cylinder Electronic speed governor for speed and power output control with automatic knocking control Oil sump, removable without lifting the engine Version: 28.09.2012, materials and specifications are subject to change without notice due to technical advances. MTU Onsite Energy A Rolls-Royce Power Systems Brand www.mtuonsiteenergy.com 3042 Configuration No. of cylinders Bore/Stroke Cyl. displacement Rated speed 90°V 12 130/142 mm (5.12/5.59 in) 1.88 lit. (115 cu in) 1800 rpm Subject to change. | 3236741 | Edition 01/14 | ENC 2014-01 | Printed in Germany on chlorine-free bleached papaer. 3066 Configuration No. of cylinders Bore/Stroke Cyl. displacement Rated speed