HLMD-PG12864LRU-KCN-HQ - Powertip Technology Corp.

TECH. CORP.
SPECIFICATIONS
CUSTOMER
:
CDE021
SAMPLE
CODE
:
SG12864LRU-KCN-H-Q
MASS PRODUCTION CODE
:
PG12864LRU-KCN-H-Q
SAMPLE VERSION
:
01
SPECIFICATIONS EDITION
:
002
DRAWING NO.
(Ver.)
:
HLMD-PG12864LRU-KCN-H-Q (Ver.001)
PACKAGING NO. (Ver.)
:
DPK-06786(Ver.001)
Customer Approved
Date:
Approved
Checked
Designer
王剛 2009/03/24
魏永超 2009/03/24
楊清龍 2009/03/24
□
Preliminary specification for design input
■
Specification for sample approval
POWERTIP TECH. CORP.
Headquarters:
th
No.8, 6 Road, Taichung Industrial Park,
TEL: 886-4-2355-8168
E-mail: [email protected]
FAX: 886-4-2355-8166
Http://www.powertip.com.tw
Taichung, Taiwan
台中市 407 工業區六路 8 號
NO.PT-A-005-8
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
RECORDS OF REVISION
Date
(mm / dd /
Ver. Edi.
Description
Page
Design
by
yyyy)
7/21/2006 01
001
PG12864LRU-KCN-H-Q is the ROHS compliant part number
based on Powertip’s standard PG12864LRU-KCN-H
-
-
3/24/2009 01
002
Change The Operating Temperature’s Vop
-
楊清龍
Total:27 page
PG12864LRU-KCN-H-Q
DK
Page2
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
Contents
1. SPECIFICATIONS
1.1
1.2
1.3
1.4
1.5
1.6
Features
Mechanical Specifications
Absolute Maximum Ratings
DC Electrical Characteristics
Optical Characteristics
Backlight Characteristics
2. MODULE STRUCTURE
2.1
2.2
2.3
2.4
Counter Drawing
Interface Pin Description
Timing Characteristics
Display Command
3. QUALITY ASSURANCE SYSTEM
3.1 Quality Assurance Flow Chart
3.2 Inspection Specification
4. RELIABILITY TEST
4.1
Reliability Test Condition
5. PRECAUTION RELATING PRODUCT HANDLING
5.1
5.2
5.3
5.4
Safety
Handling
Storage
Terms of Warranty
Appendix: 1. LCM Drawing
2. Packing Specification
PG12864LRU-KCN-H-Q
DK
Page3
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
1. SPECIFICATIONS
1.1 Features
Item
Standard Value
Display Type
128*64 dots
LCD Type
STN,Y/G, Transflective, Positive, Extended Temp.
Driver Condition
LCD Module : 1/64 Duty , 1/9 Bias
Viewing Direction
6 O’clock
Backlight
Yellow-Green LED B/L
Weight
64.0g
Interface
8 bit parallel data input
Other(controller / driver IC)
NT7107/NT7108
ROHS
THIS PRODUCT CONFORMS THE ROHS OF PTC
Detail information please refer web side :
http://www.powertip.com.tw/news/LatestNews.asp
1.2 Mechanical Specifications
Item
Standard Value
Unit
Outline Dimension
93.0 (L) *70.0 (w) * 12.5(H)(Max)
mm
Viewing Area
72.0(L) *40.0(w)
mm
Active Area
66.52 (L) * 33.24(w)
mm
Dot Size
0.48 (L) * 0.48 (w)
mm
Dot Pitch
0.52 (L) *0.52 (w)
mm
Note:For detailed information please refer to LCM drawing
1.3
Absolute Maximum Ratings
Item
Symbol
Condition
Min.
Max.
Unit
Power Supply Voltage
VDD
-
-0.3
7.0
V
LCD Driver Supply Voltage
VLCD
-
Input Voltage
VIN
-
-0.3
VDD+0.3
V
Operating Temperature
TOP
Excluded B/L
-20
70
℃
Storage Temperature
TST
Excluded B/L
-30
80
℃
Storage Humidity
HD
Ta<60 ℃
-
90
%RH
PG12864LRU-KCN-H-Q
DK
VDD-19.0 VDD+0.3
Page4
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
V
SAMPLE Ver.01
SPEC Edi.002
1.4 DC Electrical Characteristics
VDD =5.0 V ± 10%,VSS = 0V, Ta = 25℃
Item
Symbol
Condition
Min.
Typ.
Max.
Unit
Logic Supply Voltage
VDD
-
4.5
5.0
5.5
V
“H” Input Voltage
VIH
-
0.7VDD
-
VDD
V
“L” Input Voltage
VIL
-
Vss
-
0.3VDD
V
“H” Output Voltage
VOH
-
VDD-0.4
-
-
V
“L” Output Voltage
VOL
-
-
-
0.4
V
VDD =5.0V;VOP= 12.5 V;
Pattern= Full display
-
4.2
-
VDD =5.0V;VOP= 12.5 V;
Pattern= Horizontal line*1
-
4.2
6.5
-20℃
12.5
12.7
12.9
25℃
12.3
12.5
12.7
70℃
12.1
12.3
12.5
Supply Current
IDD
LCM Driver Voltage
VOP*2
mA
V
NOTE: *1 The Maximum current display;
*2 The VOP test point is VDD-VO.
PG12864LRU-KCN-H-Q
DK
Page5
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
1.5 Optical Characteristics
LCD Panel:1/64Duty,1/9Bias,VLCD =12.4V,Ta =25℃
Item
Symbol
Min.
Typ.
Max.
Unit
Reference
ms
Note2
Deg.
Notes 1
Rise
tr
-
200
-
Fall
tf
-
150
-
Top
ΘY+
C>2.0,
0
-
40
Bottom
ΘY-
∅ = 270°
0
-
40
Left
ΘX-
0
-
45
Right
ΘX+
0
-
45
5
7
-
-
Note 3
20
30
-
cd/m2
Note 4
70
-
-
%
Response Time
Viewing angle
range
Conditions
Contrast Ratio
CR
Average Brightness
(with LCD) *2
IV
Uniformity *1
△B
25°C
IF=120 mA
Note 4 :
1:△B=B(min) / B(max) * 100%
2:Measurement Condition for Optical Characteristics:
a:Environment: 25℃±5℃ / 60±20%R.H,no wind,dark room below 10 Lux at typical lamp
current and typical operating frequency.
b:Measurement Distance: 500 ± 50 ㎜ ,(θ= 0°)
c:Equipment: TOPCON BM-7 fast,(field 1°),after 10 minutes operation.
d:The uncertainty of the C.I.E coordinate measurement ±0.01,Average Brightness ± 4%
1
2
3
VIEW AREA
6
5
4
7
8
θθ
9
500 ㎜
LCM
Colorimeter=BM-7 fast
PG12864LRU-KCN-H-Q
DK
Page6
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
Note 1.
Optical characteristics-2
Viewing angle
Rear (12H)
φ =90°
Top (θ=0°)
θL
θR
θ+
θ-
Left (9H)
φ =180°
Right (3H)
φ=0°
Front (6H)
φ =270°
Viewing angle
PG12864LRU-KCN-H-Q
DK
Page7
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
Note 2.
Optical characteristics-3
Fig.2 Definition of response time
Positive Type
No selected waveform
No selected waveform
Selected waveform
Transmittance
10%
90%
100%
%
Tf
Tr
Negative Type
No selected waveform
No selected
waveform
Selected waveform
Transmittance
100%
90%
10%
Tr
PG12864LRU-KCN-H-Q
DK
Tf
Page8
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
Electrical characteristics-2
※2 Drive waveform
Vop: Drive voltage
1/B: Bias
N: Duty
fF: Frame frequency
fD: Drive frequency
(1) Selected waveform
1
2
V
o
3
N
1
3
2
Vop/B
Vop/B
V
o
1/fD
1/fF
(2) Non- Selected wave form
1
2
3
N
1
2
3
(1-2/B)Vop
Vop/B
Vop/
(1-2/B)Vop B
1/fF
1/fD
Note:
Frame frequency is defined as follows: Common side supply
voltage peak - to - peak /2 = 1 period
PG12864LRU-KCN-H-Q
DK
Page9
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
Note 3. : Definition of Vth
Selected waveform
100
%
73%
Transmittanc
e
No selected waveform
50%
Vth1
Vth2
Drive
voltage
Active voltage range
View direction
Drive waveform
Transmittance
Vth1
10°
(Selected waveform)
50%
Vth2
40°
(No selected waveform)
73%
※1 Contrast ratio
= (Brightness in OFF state) / (Brightness in ON state)
Outline of Electro-Optical Characteristics Measuring System
Photo Detector
θ
Human
Eye
Active
ψ
Temperatur
e Control
Chamber
LCD Panel
Transmissive
Measuring System: Autronic DMS-803
PG12864LRU-KCN-H-Q
DK
Page10
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
1.6 Backlight Characteristics
LCD Module with LED Backlight
Maximum Ratings
Item
Symbol
Conditions
Min.
Max.
Unit
Forward Current
IF
Ta =25℃
-
975
mA
Reverse Voltage
VR
Ta =25℃
-
8
V
Reverse Current
IR
VR= 8V
-
0.39
mA
Power Dissipation
PD
Ta =25℃
-
4.48
W
Item
Symbol
Conditions
Forward Voltage
VF
Average Brightness
(without LCD)
IV
Wavelength
(without LCD)
λp
Electrical / Optical Characteristics
IF= 390mA
Typ.
Max.
Unit
-
4.2
4.6
V
184
230
-
cd/m2
569
-
576
nm
Yellow-Green
Color
PG12864LRU-KCN-H-Q
Min.
DK
Page11
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
2. MODULE STRUCTURE
2.1 Counter Drawing
2.1.1
LCM Mechanical Diagram
* See Appendix
2.1.2
Block Diagram
PG12864LRU-KCN-H-Q
DK
Page12
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
2.2 Interface Pin Description
Pin No
Symbol
Function
1
Vss
Signal ground (GND)
2
VDD
Power supply for logic(VDD>VSS)
3
VO
Operating voltage for LCD (variable)
4
Register selection input
High=Data register
Low=Instruction register (for write)
Busy flag address counter (for read)
5
R/W Signal input is used to select the read/write mode
High=Read mode ,
Low=Write mode
6
E
Start enable signal to read or write the data
7
DB0
Data bus
8
DB1
Data bus
9
DB2
Data bus
10
DB3
Data bus
11
DB4
Data bus
12
DB5
Data bus
13
DB6
Data bus
14
DB7
Data bus
15
CS1
Chip enable for D2 (segment 1 to segment 64)
16
CS2
Chip enable for D3 (segment 65 to segment 128)
Rest signal
17
18
Vout
Negative voltage power supply.
19
A
Power supply for LED B/L. (+)
20
K
Power supply for LED B/L. (-)
PG12864LRU-KCN-H-Q
DK
Page13
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
2.3 Timing Characteristics
PG12864LRU-KCN-H-Q
DK
Page14
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
PG12864LRU-KCN-H-Q
DK
Page15
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
PG12864LRU-KCN-H-Q
DK
Page16
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
2.4 Display command
PG12864LRU-KCN-H-Q
DK
Page17
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
PG12864LRU-KCN-H-Q
DK
Page18
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
PG12864LRU-KCN-H-Q
DK
Page19
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
PG12864LRU-KCN-H-Q
DK
Page20
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
PG12864LRU-KCN-H-Q
DK
Page21
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
3. QUALITY ASSURANCE SYSTEM
3.1 Quality Assurance Flow Chart
Item
Customer
Sales
Info
Marketing
&
Design
R&D
Manufactur
ing
Q.A
Product
control
Purchase
Inventory
control
Survey
Request
Project evaluation
Inquiry
Project Validation
NG
OK
Quote
Contract
Design check
Sample test
Sample
Approval
NG
Verification
OK
Sample approval
NG
Pilot
Pilot
Run
&
Mass
Product
NG
PG12864LRU-KCN-H-Q
run & Reliability test
Verification
OK
Specification preparation
Mass production
OK
Ship
Out
OK
Inspection
NG
Shipment
Ship out
DK
Page22
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
Item
Customer
Sales
Info
Claim
R&D
Q.A
Manufactu Product
ring
control
Purchase
Inventory
control
Failure analysis
Sales
Service
Analysis report
Corrective action
Tracking
1. ISO 9001 Maintenance Activities
Q.A
3. Equipment calibration
Activity 5. Standardization Management
PG12864LRU-KCN-H-Q
DK
2. Process improvement proposal
4. Education And Training Activities
Page23
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
3.2 Inspection Specification
PG12864LRU-KCN-H-Q
DK
Page24
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
PG12864LRU-KCN-H-Q
DK
Page25
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
PG12864LRU-KCN-H-Q
DK
Page26
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
PG12864LRU-KCN-H-Q
DK
Page27
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
PG12864LRU-KCN-H-Q
DK
Page28
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
PG12864LRU-KCN-H-Q
DK
Page29
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
4. RELIABILITY TEST
4.1 Reliability Test Condition
NO.
1
2
3
4
TEST ITEM
TEST CONDITION
Keep in 80 ±2℃ 96 hrs
High Temperature Storage Test
Surrounding temperature, then storage at normal condition 4hrs
Low Temperature Storage Test Keep in -30 ±2℃ 96 hrs
Surrounding temperature, then storage at normal condition 4hrs
Keep in +60℃/90%RH duration for 96 hrs
High Humidity Storage
Surrounding temperature, then storage at normal condition 4hrs
(Excluding the polarizer)
Air Discharge:
Contact Discharge:
Apply 6 KV with 5 times
Apply 250V with 5 times
Discharge for each polarity +/discharge for each polarity +/1. Temperature Ambient:15℃〜35℃
2. Humidity relative:30%〜60%
ESD Test
3. Energy Storage Capacitance(Cs+Cd):150pF±10%
4. Discharge Resistance(Rd):330Ω±10%
5. Discharge, mode of operation:
Single Discharge (time between successive discharges at least 1 s)
(Tolerance lf the output voltage indication: ±5%)
-20℃ → 25℃ → 70℃ → 25℃
5
Temperature Cycling Test
6
Vibration Test (Packaged)
(30mins) (5mins) (30mins) (5mins)
10 Cycle
Surrounding temperature, then storage at normal condition 4hrs
1. Sine wave 10〜55HZ frequency (1 min)
2. The amplitude of vibration :1.5 mm
3. Each direction (XYZ) duration for 2 Hrs
Packing Weight (Kg)
0 ~ 45.4
7
Drop Test (Packaged)
Drop Height (cm)
122
45.4 ~ 90.8
76
90.8 ~ 454
61
Over 454
46
Drop direction :※3 corner /1 edges /6 sides each 1times
PG12864LRU-KCN-H-Q
DK
Page30
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
5. PRECAUTION RELATING PRODUCT HANDLING
5.1 SAFETY
5.1.1
5.1.2
If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin.
If the liquid crystal touches your skin or clothes , please wash it off immediately by
using soap and water.
5.2 HANDLING
5.2.1
5.2.2
5.2.3
5.2.4
5.2.5
5.2.6
5.2.7
5.2.8
5.2.9
Avoid any strong mechanical shock which can break the glass.
Avoid static electricity which can damage the CMOS LSI—When working with the
module , be sure to ground your body and any electrical equipment you may be using.
Do not remove the panel or frame from the module.
The polarizing plate of the display is very fragile. So , please handle it very
carefully ,do not touch , push or rub the exposed polarizing with anything harder
than an HB pencil lead (glass , tweezers , etc.)
Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the
surface of plate.
Do not touch the display area with bare hands , this will stain the display area.
Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with
a cleaning naphtha solvent.
To control temperature and time of soldering is 320±10℃and 3-5 sec.
To avoid liquid (include organic solvent) stained on LCM .
5.3 STORAGE
5.3.1
5.3.2
5.3.3
Store the panel or module in a dark place where the temperature is 25℃ ±5℃
and the humidity is below 65% RH.
Do not place the module near organics solvents or corrosive gases.
Do not crush , shake , or jolt the module.
5.4 TERMS OF WARRANTY
5.4.1
5.4.2
Applicable warrant period
The period is within thirteen months since the date of shipping out under normal
using and storage conditions.
Unaccepted responsibility
This product has been manufactured to your company’s specification as a part for
use in your company’s general electronic products. It is guaranteed to perform
according to delivery specifications. For any other use apart from general
electronic equipment , we cannot take responsibility if the product is used in
nuclear power control equipment , aerospace equipment , fire and security
systems or any other applications in which there is a direct risk to human life
and where extremely high levels of reliability are required.
PG12864LRU-KCN-H-Q
DK
Page31
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
SAMPLE Ver.01
SPEC Edi.002
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com