A Business Partner of Renesas Electronics Corporation. PS2801C-1, PS2801C-4 HIGH ISOLATION VOLTAGE SSOP PHOTOCOUPLER Data Sheet R08DS0072EJ0400 Rev.4.00 Jan 9, 2013 DESCRIPTION These products are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor in a plastic SSOP for high density applications to realize an excellent cost performance. This package has shield effect to cut off ambient light. FEATURES • • • • <R> • <R> • High isolation voltage (BV = 2 500 Vr.m.s.) Small and thin package (4, 16-pin SSOP, Pin pitch 1.27 mm) High collector to emitter voltage (VCEO : 80 V) Ordering number of tape product: PS2801C-1-F3, PS2801C-4-F3 Pb-Free product Safety standards • UL approved: File No. E72422 • CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950) • BSI approved (BS EN 60065, BS EN 60950) (PS2801C-1 only) • DIN EN 60747-5-5 (VDE 0884-5) approved (Option) APPLICATIONS • • • • PIN CONNECTION (Top View) PS2801C-1 4 3 1 2 1. Anode 2. Cathode 3. Emitter 4. Collector PS2801C-4 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 Programmable logic controllers Measuring instruments Power supply Hybrid IC 1. 3. 5. 7. 2. 4. 6. 8. 9. 11. 13. 15. 10. 12. 14. 16. Anode Cathode Emitter Collector The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. R08DS0072EJ0400 Rev.4.00 Jan 9, 2013 Page 1 of 12 A Business Partner of Renesas Electronics Corporation. PS2801C-1, PS2801C-4e PACKAGE DIMENSIONS (UNIT: mm) PS2801C-1 PS2801C-4 2.7±0.3 10.3±0.3 16 9 1 2 1 8 7.0±0.3 4.4 4.4 0.1±0.1 0.5±0.3 1.27 0.4±0.1 0.12 M <R> 0.15+0.10 –0.05 7.0±0.3 2.0+0.3 –0.2 2.0±0.1 0.15+0.10 –0.05 3 0.1±0.1 4 0.40+0.10 –0.05 0.12 M 1.27 0.5±0.3 PHOTOCOUPLER CONSTRUCTION Parameter Unit (MIN.) Air Distance 4.5 mm Outer Creepage Distance Inner Creepage Distance Isolation Distance 4.5 mm 2.5 mm 0.1 mm R08DS0072EJ0400 Rev.4.00 Jan 9, 2013 Page 2 of 12 A Business Partner of Renesas Electronics Corporation. PS2801C-1, PS2801C-4e <R> MARKING EXAMPLE PS2801C-1 Company initial Made in Taiwan Last 2 numbers of type No. : 1C Assembly Lot 301 Week Assembled Year Assembled (Last 1 digit) Made in Taiwan Halogen free " " (Vertical bar) :Made in Taiwan & Halogen free " " (Square) :Made in Japan " " (Horizontal bar) :Made in Japan & Halogen free Made in Japan Made in Japan Halogen free PS2801C-4 R Country Assembled PS2801C-4 NL301 Assembly Lot No. 1 pin Mark N L 3 01 Week Assembled Year Assembled (Last 1 Digit) In-house Code (L: Pb-Free) Rank Code R08DS0072EJ0400 Rev.4.00 Jan 9, 2013 Page 3 of 12 A Business Partner of Renesas Electronics Corporation. PS2801C-1, PS2801C-4e <R> ORDERING INFORMATION Part Number Order Number PS2801C-1-F3 PS2801C-1-F3-A Solder Plating Specification etc. Pb-Free Safety Standard Approval Application *1 Part Number Embossed Tape 3 500 pcs/reel Standard products PS2801C-1 PS2801C-4 Packing Style PS2801C-4-F3 PS2801C-4-F3-A Embossed Tape 2 500 pcs/reel (UL, CSA, BSI approved) PS2801C-1-V-F3 PS2801C-1-V-F3-A Embossed Tape 3 500 pcs/reel DIN EN 60747-5-5 PS2801C-1 Embossed Tape 2 500 pcs/reel (VDE0884-5) Approved (Option) PS2801C-4 Standard products PS2801C-1 PS2801C-4-V-F3 PS2801C-4-V-F3-A PS2801C-1-F3 PS2801C-1Y-F3-A Special version Embossed Tape 3 500 pcs/reel (Pb-Free and Halogen Free) PS2801C-1-V-F3 (UL, CSA, BSI approved) Embossed Tape 3 500 pcs/reel PS2801C-1Y-V-F3-A DIN EN 60747-5-5 (VDE0884-5) Approved (Option) Note: *1. For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Diode Parameter Symbol Ratings PS2801C-1 PS2801C-4 Unit Forward Current (DC) IF 30 mA/ch Reverse Voltage VR 6 V Power Dissipation Derating Power Dissipation *1 ΔPD/°C 0.6 0.8 mW/°C PD 60 80 mW/ch IFP 0.5 A/ch Collector to Emitter Voltage VCEO 80 V Emitter to Collector Voltage VECO 5 V IC 30 mA/ch ΔPC/°C 1.2 mW/°C PC 120 mW/ch BV 2 500 Vr.m.s. Operating Ambient Temperature TA −55 to +100 °C Storage Temperature Tstg −55 to +150 °C Peak Forward Current Transistor Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage Notes: *2 *1. PW = 100 μs, Duty Cycle = 1% *2. AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together (PS2801C-1). Pins 1-8 shorted together, 9-16 shorted together (PS2801C-4). R08DS0072EJ0400 Rev.4.00 Jan 9, 2013 Page 4 of 12 A Business Partner of Renesas Electronics Corporation. PS2801C-1, PS2801C-4e ELECTRICAL CHARACTERISTICS (TA = 25°C) Parameter Diode Symbol Conditions Forward Voltage VF IF = 5 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1.0 MHz Transistor Collector to Emitter Dark Current ICEO VCE = 80 V, IF = 0 mA Coupled Current Transfer Ratio *1 (IC/IF) CTR IF = 5 mA, VCE = 5 V Collector Saturation Voltage VCE (sat) IF = 10 mA, IC = 2 mA Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz Rise Time Fall Time *2 tr *2 <R> Turn-on Time *2 <R> Turn-off Time *2 Notes: MIN. TYP. MAX. Unit 1.2 1.4 V 5 μA 10 pF 50 0.13 10 VCC = 5 V, IC = 2 mA, RL = 100 Ω 100 nA 400 % 0.3 V Ω 11 0.4 pF 5 μs tf 7 ton 10 toff 7 *1. CTR rank PS2801C-1 N : 50 to 400 (%) P : 150 to 300 (%) L : 100 to 300 (%) M : 100 to 400 (%) PS2801C-4 N : 50 to 400 (%) M : 100 to 400 (%) *2. Test circuit for switching time VCC Pulse Input PW = 100 μ s Duty Cycle = 1/10 Input ton IF td toff ts VOUT 50 Ω RL = 100 Ω 90% Output 10% tr R08DS0072EJ0400 Rev.4.00 Jan 9, 2013 tf Page 5 of 12 A Business Partner of Renesas Electronics Corporation. PS2801C-1, PS2801C-4e TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 100 80 PS2801C-4 60 0.8 mW/°C PS2801C-1 40 0.6 mW/°C 20 0 0 25 50 75 100 125 10 160 PS2801C-1 PS2801C-4 120 1.2 mW/°C 80 40 0 0 25 50 75 100 125 Ambient Temperature TA (°C) FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 30 TA = +100°C +60°C +25°C Collector Current IC (mA) Forward Current IF (mA) 50 200 Ambient Temperature TA (°C) 100 5 0° C –25°C –55°C 1 0.5 CTR = 250% IF = 10 mA 25 20 5 mA 15 10 2 mA 5 1 mA 0.1 0.05 0.7 Collector to Emitter Dark Current ICEO (nA) 0.8 0.9 1.0 1.1 1.2 1.3 1.4 0 0 1.5 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 10 10 000 IF = 10 mA 5 mA Collector Current IC (mA) <R> VCE = 80 V 1 000 70 V 100 24 V 10 1 0 25 50 CTR = 200% 75 100 Ambient Temperature TA (°C) 2 mA 1 mA 1 0.1 0 0.2 0.4 0.6 CTR = 250% 0.8 1.0 Collector Saturation Voltage VCE (sat) (V) Remark The graphs indicate nominal characteristics. R08DS0072EJ0400 Rev.4.00 Jan 9, 2013 Page 6 of 12 A Business Partner of Renesas Electronics Corporation. PS2801C-1, PS2801C-4e CURRENT TRANSFER RATIO vs. FORWARD CURRENT 1.4 Current Transfer Ratio CTR (%) 1.2 1.0 80% 0.8 0.6 0.4 Normalized to 1.0 0.2 at TA = 25°C, IF = 5 mA, VCE = 5 V 0 –75 –50 –25 0 100 Switching Time t (μ s) 400 CTR = 250% 25 50 75 VCE = 5 V, n=3 300 Sample A B C 200 100 0 0.01 100 0.1 1 10 Ambient Temperature TA (°C) Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE SWITCHING TIME vs. LOAD RESISTANCE 100 1 000 IC = 2 mA, VCC = 5 V, CTR = 228% IF = 5 mA, VCC = 5 V, CTR = 228% tf Switching Time t (μs) Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE tr 10 td ts 1 tf 100 ts 10 tr td 0.1 10 100 1 000 10 000 1 1 10 100 Load Resistance RL (kΩ) Load Resistance RL (Ω) FREQUENCY RESPONSE 5 Normalized Gain Gv 0 100 Ω –5 RL = 1 kΩ –10 –15 300 Ω –20 IF = 5 mA, VCE = 5 V –25 0.1 1 10 100 1 000 Frequency f (kHz) Remark The graphs indicate nominal characteristics. R08DS0072EJ0400 Rev.4.00 Jan 9, 2013 Page 7 of 12 A Business Partner of Renesas Electronics Corporation. PS2801C-1, PS2801C-4e TAPING SPECIFICATIONS (UNIT: mm) 2.0±0.1 φ 1.5+0.1 –0 4.0±0.1 16.0±0.3 7.55±0.1 1.75±0.1 Outline and Dimensions (Tape) 7.5±0.1 2.8 MAX. 0.3 1.55±0.1 2.3±0.1 2.85±0.1 4.0±0.1 Tape Direction PS2801C-1-F3 R1C 301 R1C 301 R1C 301 R1C 301 R1C 301 Outline and Dimensions (Reel) 2.0±0.5 φ13.0±0.2 R 1.0 φ 21.0±0.8 φ 100±1.0 2.0±0.5 φ 330±2.0 <R> 17.5±1.0 21.5±1.0 Packing: 3 500 pcs/reel R08DS0072EJ0400 Rev.4.00 Jan 9, 2013 15.9 to 19.4 Outer edge of flange Page 8 of 12 A Business Partner of Renesas Electronics Corporation. PS2801C-1, PS2801C-4e 2.8 MAX. 8.3±0.1 1.55±0.1 10.7±0.1 7.5±0.1 φ 1.5+0.1 –0 16.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 0.3 2.3±0.1 12.0±0.1 Tape Direction PS2801C-4-F3 Outline and Dimensions (Reel) 2.0±0.5 φ 21.0±0.8 φ 100±1.0 R 1.0 φ 330±2.0 2.0±0.5 φ13.0±0.2 17.5±1.0 21.5±1.0 Packing: 2 500 pcs/reel R08DS0072EJ0400 Rev.4.00 Jan 9, 2013 15.9 to 19.4 Outer edge of flange Page 9 of 12 A Business Partner of Renesas Electronics Corporation. PS2801C-1, PS2801C-4e NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature • Time of peak reflow temperature • Time of temperature higher than 220°C • Time to preheat temperature from 120 to 180°C • Number of reflows • Flux 260°C or below (package surface temperature) 10 seconds or less 60 seconds or less 120±30 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (°C) <R> (heating) to 10 s 260°C MAX. 220°C to 60 s 180°C 120°C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature • Time • Preheating conditions • Number of times • Flux (3) Soldering by Soldering Iron • Peak Temperature (lead part temperature) • Time (each pins) • Flux 260°C or below (molten solder temperature) 10 seconds or less 120°C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) 350°C or below 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (4) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. R08DS0072EJ0400 Rev.4.00 Jan 9, 2013 Page 10 of 12 A Business Partner of Renesas Electronics Corporation. PS2801C-1, PS2801C-4e 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collectoremitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially below IF = 1 mA. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. R08DS0072EJ0400 Rev.4.00 Jan 9, 2013 Page 11 of 12 A Business Partner of Renesas Electronics Corporation. PS2801C-1, PS2801C-4e SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Climatic test class (IEC 60068-1/DIN EN 60068-1) Dielectric strength maximum operating isolation voltage <R> Test voltage (partial discharge test, procedure a for type test and random test) <R> Upr = 1.6 × UIORM, Pd < 5 pC <R> Spec. Unit 55/100/21 UIORM Upr 705 1 128 Vpeak Vpeak Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 × UIORM, Pd < 5 pC Upr 1 322 Vpeak Highest permissible overvoltage UTR 6 000 Vpeak CTI 175 Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) 2 Material group (DIN EN 60664-1 VDE0110 Part 1) III a Storage temperature range Tstg −55 to +150 °C Operating temperature range TA −55 to +100 °C Ris MIN. Ris MIN. 1012 11 10 Ω Ω Tsi Isi Psi 150 300 500 °C mA mW Ris MIN. 109 Ω Isolation resistance, minimum value VIO = 500 V dc at TA = 25°C VIO = 500 V dc at TA MAX. at least 100°C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = Tsi R08DS0072EJ0400 Rev.4.00 Jan 9, 2013 Page 12 of 12 Revision History PS2801C-1, PS2801C-4 Data Sheet Rev. Date Page 1.00 4.00 May 30, 2006 Jan 9, 2013 − Throughout p.1 p.2 p.3 p.4 p.5 p.7 p.8 p.9 Description Summary This data sheet was released as PN10610EJ01V0DS Renesas format is applied to this data sheet. The ordering number and safety standards are revised. PHOTOCOUPLER CONSTRUCTION is added as each distance of this device. The explanation in MARKING EXAMPLE is revised. ORDERING INFORMATION is modified with the revision of the safety standards. Turn-on Time (ton) and Turn-off Time (toff) are added to the table in ELECTRICAL CHARACTERISTICS. The graph of LONG TERM CTR DEGRADATION is deleted from those in TYPICAL CHARACTERISTICS. PS2801C-1-F4 is deleted form Tape Direction image in TAPING SPECIFICATIONS. PS2801C-4-F4 is deleted form Tape Direction image in TAPING SPECIFICATIONS. p.10 The note about temperature condition of the recommended soldering conditions is deleted. p.12 The values in SPECIFICATION OF VDE MARKS LICENSE DOCUMENT are changed as follows. -- Test voltage is changed from the factor, 1.5, and the value, 1058, to 1.6 and 1128, respectively. -- Clearance distance is moved to PHOTOCOUPLER CONSTRUCTION with changing 5.0 (min.) to 4.5 (min.). All trademarks and registered trademarks are the property of their respective owners. C-1