Reliability Qualification Report S510065-55Z - RoHS Compliant Products Qualified by Similarity S510067-55Z The information provided herein is believed to be reliable at press time. Sirenza Microdevices assumes no responsibility for inaccuracies or omissions. Sirenza Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Data subject to change. 303 S. Technology Ct, Broomfield CO, 80021 Phone: (800) SMI-MMIC http://www.sirenza.com Document RQR-104850 Rev A 1 S510065-55Z Reliability Qualification Report I. Qualification Overview The S510065-55Z family of products has demonstrated reliable operation by passing all qualification testing in our product qualification test plan. The S510065-55Z has been subject to stresses such as humidity (autoclave), extreme hot and cold environments (temperature cycling), moisture sensitivity (MSL-1 and solder reflow testing), and has demonstrated reliable performance. II. Introduction Sirenza Microdevices’ S510065-55Z is a downconverter designed to be used as an Outof-Band Tuner for CATV set-top box and Digital Ready TV applications. This device offers optimum performance with low power consumption and low distortion. III. Fabrication Technology These downconverters are manufactured using CMOS technology which feature a high degree of process stability and reliability. IV. Package Type The S510065-55Z is packaged in a plastic encapsulated 5mm X 5mm QFN package that is assembled using a highly reproducible automated assembly process. The die is mounted using an industry standard thermally and electrically conductive silver epoxy. Figure 1: Image of 5mm X 5mm QFN Encapsulated Plastic Package 2 S510065-55Z Reliability Qualification Report V. Qualification Methodology The Sirenza Microdevices qualification process consists of a series of tests designed to stress various potential failure mechanisms. This testing is performed to ensure that Sirenza Microdevices products are robust against potential failure modes that could arise from the various die and package failure mechanisms stressed. The qualification testing is based on JEDEC test methods common to the semiconductor industry. A FMEA approach is used to determine the test methods to be included in the qualification plan. The manufacturing test specifications are used as the PASS/FAIL criteria for initial and final DC/RF tests. VI. Qualification By Similarity A device can be qualified by similarity to previously qualified products provided that no new potential failure modes/mechanisms are possible in the new design. The S51006755Z is qualified by similarity to the S510065-55Z. VII. Operational Life Testing Sirenza Microdevices defines operational life testing as a DC biased elevated temperature test performed at the maximum operational junction temperature limit. For the S510065-55Z, the maximum operational temperature limit is 150oC. The purpose of the operational life test is to statistically show that the product operated at its maximum operational ratings will be reliable by operating devices up of 1000 hours. The results for this test are expressed in device hours that are calculated by multiplying the total number of devices passing the test by the number of hours tested. VIII. Moisture Sensitivity Level - MSL Level 1 Device S510065-55Z has successfully completed 168 hours of moisture soak (85oC/85%RH), followed by three passes through a convection reflow oven at 270oC. The successful completion of this test classifies the part as JESD 22-A113B Moisture Sensitivity Level 1 (MSL-1). MSL-1 indicates that no special dry pack requirements or time limits from opening of static bag to reflow exist for the S510065-55Z. MSL-1 is highest level of moisture resistance that a device can be classified according to the above mentioned standard. 3 S510065-55Z Reliability Qualification Report IX. Electrostatic Discharge Classification Sirenza Microdevices classifies Human Body Model (HBM) electrostatic discharge (ESD) according to the JESD22-A114 convention. All pin pair combinations were tested. The Pass/Fail status of a part is determined by the manufacturing test specification. The ESD class quoted indicates that the device passed exposure to a certain voltage, but does not pass the next higher level. The following table indicates the JESD ESD sensitivity classification levels. The results of the testing indicate that S510065-55Z’s HBM ESD rating is Class 2. Class Passes Fails 0 1A 1B 1C 2 0V 250 V 500 V 1000 V 2000 V <250 V 500 V 1000 V 2000 V 4000 V Part S510065-55Z Class 2 X. Latch-Up Sirenza Microdevices performs Latch-Up testing according to the JESD78 convention. All pin pair combinations were tested at room temperature. The Latch-Up criteria is defined as an irreversible increase in current Trigger source: +/-10ma to +/-110mA in +/-10ma increments Positive Pulse Voltage Clamp: +5.4V Negative Pulse Voltage Clamp: -1.8V Sample Size: 6 Results: All passed XI. Operational Life Test Results The results for S510065-55Z High Temperature Operating Life Test are as follows: Test Duration Junction Temperature Quantity Device Hours 1000 hours 1000 hours 125°C 150°C 77 78 77,000 78,000 4 S510065-55Z Reliability Qualification Report XII. Qualification Test Results Group Test Name Test Condition/ Standard Preconditioning Sample Size Results MSL1 Reflow @ 270oC Peak JESD22-A113C 180 Pass Tj = 125°C 1000 hours JESD22-A108B 77 Pass Tj = 150°C 1000 hours JESD22-A108B 78 Pass 10 Pass Autoclave Tamb=121°C, 100%RH Un-Biased, 96 hours JESD22-A102C 20 Pass B3 Temperature Cycle -65°C to +150°C 10 min dwell, 1 min transition 1000 cycles JESD22-A104B B4 Temperature-Humidity Tamb=85°C, 85%RH Un-Biased, 1000 hours 30 Pass C Low Temperature Storage Tamb=-40°C 1000 hours 30 Pass High Temperature Storage Tamb=150°C 1000 hours JESD22-A103B 30 Pass D Pass Tin Whisker Tamb=60°C, 90%RH 2850 hours NEMI 10 F 15 Pass Solderability Dip & Look Steam Age Condition C Dip Condition B, 245°C JESD22-B102C B B1 B2 G High Temperature Operating Life 5