Near Infrared Light Ring Series OPA80 and OPA83 Series Features • • • • Designed for Near Infrared wavelength Cameras Daylight Light sensor available Variety of ring sizes Surface Mount or Through Hole Emitters Product Photo Here Description: The OPA80 through OPA83 series are designed to easily illuminate an area with infrared light for a variety of uses including security cameras, spot lighting, etc.. The light ring can be purchased with an ambient light sensing device for minimal current drain during high ambient light conditions. This is great for battery usage and for security cameras during daylight. A choice of through hole and surface mount LED packages, near infrared wavelength and ring sizes are available. Custom mounting, electrical, cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications include: • Security camera lighting • Spot lighting • Flash lighting Ordering Information OPA80 _ 5 _ Vcc 12 Volts, Light Ring with Daylight Light Sensor OPA81 _ 5 _ Vcc 12 Volts, Light Ring with NO Daylight Light Sensor OPA82 _ 5 _ Vcc 5 Volts, Light Ring with Daylight Light Sensor OPA83 _ 5 _ Vcc 5 Volts, Light Ring with NO Daylight Light Sensor W 5 Y Type of Optical component Package = W Z Z = Meets RoHS requirements Qty of LEDs Through Hole - 3 mm package T3 Surface Mount - SM Y = Ring Size ID & OD Near IR 850 nm center wavelength = 5 12 Volt 5 Volt A .625" ID & 1.25" OD 12 10 B 1.0" ID & 1.75" OD 18 16 C 1.25" ID & 2.0" OD 18 16 D 1.5" ID & 2.25" OD 24 20 Example: OPA80T35CZ 12 VDC power, Light Ring with Daylight Light Sensor, Through Hole 3mm package, IR - 850 nm center wavelength LED, Ring Size = 1.25" ID & 2.0" OD with 18 LEDs RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B.1 01/09 Page 1 of 4 Near Infrared Light Ring Series OPA80 and OPA83 Series Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage Temperature -40° C to +100° C Operating Temperature -40° C to +85° C 260° C (1) Lead Soldering Temperature (1/16” (1.6mm) from case for 5 seconds with soldering iron) Reverse Voltage per Emitter 2.0 V Continuous Forward Current 50 mA Peak Forward Current (2 µs pulse width, 0.1% duty cycle) 1.0 A Notes: (1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL PARAMETER Forward Voltage VF MIN TYP MAX UNITS CONDITIONS (each LED) 850 nm LED 1.20 1.35 1.80 Volts IF = 20 mA Viewing Angle (at 50% power points, each component) Surface Mount—SM Package VCC Power Supply Voltage OPA80, OPA81 OPA82, OPA83 — Deg. Total inclusive angle at 50% of maximum optical power. 13 5.5 Volts ICC varies with VCC 18° 3 mm—T3 Package 2 ½lH-H — 11 4.5 25° 12 5.0 OPBA80 & OPBA82 Series OPBA81 & OPBA83 Series OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B.1 01/09 Page 2 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Near Infrared Light Ring Series OPA80 and OPA83 Series PCBoard Layout 12 LED Ring 12 Volts 18 LED Ring 12 Volts 18 LED Ring 12 Volts 24 LED Ring 12 Volts OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B.1 01/09 Page 3 of 4 Near Infrared Light Ring Series OPA80 and OPA83 Series PCBoard Layout 10 LED Ring 5 Volts Ø0.625 [Ø15.9] Da r 5B 3A e od An 3B Ano de 4A e od An W de atho CAnode Ca th Anodode e e de Ano An od e hode de tho Ca 4B An od e Ground 5A 0.25 od th Ca Cathode hode 3A 16 LED Ring 5 Volts Cathode Ca tho de Cat 3B ode Anode Cat 0.25W 0.2 5W 0.25W 0.2 5W Anode Cathode Ano de 4A 4B Cat hode 0.25W Cath Anode Collect or ode Cathode 1A Emitter e An 2B OP830 SL Ca tho d e r cto E lle 2A r m Co 22 itte itter BT ECm M oll M ec se to r Ba Cathode 2B 5B 5W 0.2 Anod 2A 2B GND 1A 1B 2A e od ath de CAno 5A Ano de e od Cat hode An Anode A PN222 Cathode 0.25W Anode 0.25W Catho de Anode Emitter Base de Catho Collector 5W 0.2 0.2 5W Vcc Vcc 5W 0.2 Ø1.250 [Ø31.8] 16 LED Ring 5 Volts 0.25 W 5W Ca th od e An od e 0.2 r cto lle Co r itte Em Gro un d 8B 8A 3A An od e Anod e Catho de e Anod 0.25W Anod e Cathode Anode Vcc 7B de Catho 0.25W 0.25W hode Cat hode 3B Cat de Ano de tho Ca e Anod 1C 4B de Cathode Anode de Catho 5W 0.2 6A de Ano e Ano atho de e 5B od th C de od Cathode Ca An o e th Ø2.000 [Ø50.8] de th od o An Ca Ca 5B Ano de 0.2 5W 6B e od An Cat hode An od e 5W 4A 7A de od e Anode W Ca tho de de tho Ca o An Ca th Ca tho de 0.2 An od e e od An 2B 2C 0.25 6B 5W 3C 0.2 5W Anode 0.25W 0.25W e Anod An od e 4B 0.2 6A 3B An o de e tho de de Catho Catho de Cathode Ca th od e de Catho Ø1.250 [Ø31.8] Anod Ca 5C de tho Ca An od e 6A 5W e od An Ca tho de 6C r cto lle 2A r 22 itte BT Em MM se Ba Co de tho Ca 2A 2B e od An 5A 0.2 1A 4A 2B r Anode r Da Cathode W Cathode W 222A PN Anode 0.25 5W 0.2 Anode Gro und Base 2A 5 0.2 Cathode Cathode 1A Anode e itte Em or lect Bas P O L 0S 83 Col r cto itter lle Em Co Ø1.250 [Ø31.8] Vcc W 0.25 5A e ode Ca th od e 1A Catho de 0.25W 0.25W Anode An od Ca th Ca tho de An od e Co lle cto r de tho Ca Da r de 5W 0.2 Em itte r An th Ca hode ode e od 1A 0.25 W de Cathode Catho 1A Anod e 5W 0.2 0.2 5W 0.2 5W Ano 1A 1A 1A Cat 5W 0.2 Anode Anode 1A Cathode Cathode Anode Anode Cathode 1A Cathode 1A 1A 1A 1A 1A 1A hode de d tho Ca Ca tho de C ath od e An od e Ca An An od e 1A 1A 1A 1A Anode 5W e od An 0.2 de tho Ca 1A Cat 0.25W 0.2 5W 1A Ano An od e Cathode 0.2 5W Ca tho de 1A Ano de e de tho Ca An od e Cat hode e od od 1A 1A de An An 1A hode Ca th od e 1A Ø2.250 [Ø57.2] Cat 1A 1A hode Cat Anode de Ano Cathode 5W 0.2 od An th e e od e od e 0.25W 0.25W 0.25W e Anod tho Catho de 1A 1A ode Cath Anod e Anod e 0.25W e Catho de Anod 1A Ø1.500 [Ø38.1] Cathode de Anode 0.25W Anode 1A Anode Ca An od e 0.2 e 0.2 5W GN D 1A 1A 1A 1A od e 1A An od th Ca o de de C oll M ec M to BT r 22 2A as e itte r 1A hod e Em 1A Ca th od e An ode Vcc th e tho Ca 1A o An 1A B 1A An od e od An 5W 0.2 Ca r 1A itter Em Cat e Anod 1A 222A ode Cath 1A Anode e Anod itte de CathoColle ctor Bas e Em PN 1A Cathode Base 0.25W or lect Col 0SL OP83 5W 20 LED Ring 5 Volts OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B.1 01/09 Page 4 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com