JAN(TX,TXV) - OPTEK Technology

Hi-Reliability Optically Coupled Isolator
JAN / JANTX / JANTXV 4N47, 4N48, 4N49 [A]
Features:
 TO-78 hermetically sealed package
 High current transfer ratio
 1 kV electrical isolation
 Base contact provided for conventional transistor biasing
 JAN, JANTX and JANTXV devices processed to MIL-PRF19500
 Patent No. 4124860
Description:
Each isolator in this series consists of an infrared emitting diode and a NPN silicon phototransistor, which are mounted
in a hermetically sealed TO-78 package. Devices are designed for military and/or harsh environments. The suffix letter
“A” denotes the collector is electrically isolated from the case.
The JAN / JANTX / JANTXV 4N47, 4N47A, 4N48, 4N48A, 4N49, and 4N49A devices are processed to MIL-PRF19500/548.
This series of 4N products are JEDEC registered, DSCC qualified.
Please contact your local representative or OPTEK for more information.
Applications:
 High-voltage isolation between input and output
 Electrical isolation in dirty environments
 Industrial equipment
 Medical equipment
 Office
Pin #
Function
Pin #
Function
3
Collector
5
Anode
2
Base
6
Open
1
Emitter
7
Cathode
This product is built, tested and shipped from the USA
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue E 01/2014
Page 1 of 4
Hi-Reliability Optically Coupled Isolator
JAN / JANTX / JANTXV 4N47, 4N48, 4N49 [A]
Absolute Maximum Ratings (TA = 25° C unless otherwise noted)
Storage Temperature Range
-55° C to +150° C
Operating Temperature Range
-55° C to +125° C
± 1.00 kVDC(1)
Input-to-Output Isolation Voltage
260° C(2)
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron]
Input Diode
Forward DC Current (65° C or below)
40 mA
Reverse Voltage
2V
60 mW(3)
Power Dissipation
Output Phototransistor:
Continuous Collector Current
50 mA
Collector-Emitter Voltage
40 V
Collector-Base Voltage
45 V
Emitter-Base Voltage
7.0 V
300 mW(4)
Power Dissipation
Notes:
1. Measured with input leads shorted together and output leads shorted together.
2. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
3. Derate linearly 1.0 mW/° C above 65° C.
4. Derate linearly 3.0 mW/° C above 25° C.
Ordering Information
Part
Number
Isolation
Voltage (kV)
IF (mA)
Typ / Max
VCE
(Volts)
Max
Processing
MIL-PRF195000
1
1 / 40
40
548
JAN4N47 or JAN4N47A
JANTX4N47 or JANTX4N47A
JANTXV4N47 or JANTXV4N47A
JAN4N48 or JAN4N48A
JANTX4N48 or JANTX4N48A
JANTXV4N48 or JANTXV4N4A8
JAN4N49 or JAN4N49A
JANTX4N49 or JANTX4N49A
JANTXV4N49 or JANTXV4N49A
This product is built, tested and shipped from the USA
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue E 01/2014
Page 2 of 4
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Hi-Reliability Optically Coupled Isolator
JAN / JANTX / JANTXV 4N47, 4N48, 4N49 [A]
Electrical Characteristics (TA = 25°C unless otherwise noted)
PARAMETER
SYMBOL
MIN
TYP
MAX UNITS
TEST CONDITIONS
Input Diode
VF
Forward Voltage
0.80
1.00
0.70
-
1.50
1.70
1.30
V
IF = 10.0 mA
IF = 10.0 mA, TA = -55° C(1)
IF = 10.0 mA, TA = 100° C(1)
IR
Reverse Current
-
-
100
µA
VR= 2.0 V
V(BR)CEO Collector-Emitter Breakdown Voltage
40
-
-
V
IC = 1.0 mA, IB= 0, IF= 0
V(BR)CBO Collector-Base Breakdown Voltage
45
-
-
V
IC = 100 µA, IB= 0, IF= 0
V(BR)EBO
Emitter-Base Breakdown Voltage
7
-
-
V
IE = 100 µA, IC= 0, IF= 0
IC(OFF)1
Collector-Emitter Dark Current
-
-
100
nA
VCE = 20 V, IB= 0, IF= 0
IC(OFF)2
Collector-Emitter Dark Current
-
-
100
µA
VCE = 20 V, IB= 0, IF= 0, TA = 100° C(1)
ICB(OFF)
Collector-Base Dark Current
-
-
10
nA
VCB = 20 V, IE= 0, IF= 0
JAN / JANTX / JANTXV 4N47 [A]
0.50
0.70
0.50
-
-
JAN / JANTX / JANTXV 4N48 [A]
1.00
1.40
1.00
-
5
-
JAN / JANTX / JANTXV 4N49 [A]
2.00
2.80
2.00
-
10
-
30
-
-
-
-
0.30
0.30
0.30
100
-
-
V
VCE = 5.0 V , IC = 10.0 mA, IF = 0 mA
11
-
-
Ω
VI-O = ± 1000 VDC(3)
Output Phototransistor
Coupled
On-State Collector Current
IC(ON)
ICB(ON)
On-State Collector Base
IF = 1.0 mA, VCE = 5.0 V, IB = 0
(1)
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55° C
(1)
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100° C
mA
IF = 1.0 mA, VCE = 5.0 V, IB = 0
(1)
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55° C
(1)
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100° C
IF = 1.0 mA, VCE = 5.0 V, IB = 0
(1)
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55° C
(1)
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100° C
µA
VCB = 5 V, IE = 0, IF = 10 mA
Collector-Emitter Saturation Voltage
VCE(SAT)
HFE
JAN / JANTX / JANTXV 4N47 [A]
JAN / JANTX / JANTXV 4N48 [A]
JAN / JANTX / JANTXV 4N49 [A]
DC Current Gain
V
IF = 2.0 mA, IC = 0.5 mA, IB = 0
IF = 2.0 mA, IC = 1.0 mA, IB = 0
IF = 2.0 mA, IC = 2.0 mA, IB = 0
RIO
Resistance (Input-to-Output)
CIO
Capacitance (Input-to-Output)
-
-
5
pF
VI-O = 0 V, f = 1.0 MHz(3)
Rise and Fall Time
-
-
20
µs
VCC = 10.0 V , IF = 5.0 mA, RL = 100 Ω
TR, TF
10
Notes:
1. Guaranteed but not tested.
2. Sample tested, LTPD = 10.
3. Measured with input leads shorted together and output leads shorted together.
This product is built, tested and shipped from the USA
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue E 01/2014
Page 3 of 4
Hi-Reliability Optically Coupled Isolator
JAN / JANTX / JANTXV 4N47, 4N48, 4N49 [A]
Typical Performance Curves
Forw ard Voltage vs Forw ard Current vs Tem perature
-55°
V F - Forward Voltage (V)
1.5
1.4
-35°
1.3
-15°
1.2
+5°
1.1
+25°
1.0
+45°
0.9
+65°
0.8
0
5
10
15
20
+85°
25
IF - Forw ard Current (m A)
+105°
-55°
Collector Current vs Forw ard Current vs Tem perature
700%
IC(ON) - Normalized Collector
Current (%)
-35°
Normalized at
+25°C
600%
-15°
500%
+5°
400%
+25°
300%
+45°
200%
+65°
100%
+85°
0%
0.0
1.0
2.0
3.0
4.0
+105°
5.0
IF - Forw ard current (mA)
+125°
Normalized Collector Current Vs
Temperature
Normalized Collector Current Vs
Temperature
140%
Normalized Collector
Current (%)
I F = 1 mA and V CE = 5
100%
I F = 1mA
80%
60%
40%
20%
0%
-55°
-35°
-15°
+5°
+25°
+45°
+65°
+85°
+105° +125°
Normalized Collector Current
(%)
140%
Nor mal i z ed at +25°C
120%
Nor mal ized at +25°C
IF = 2 mA and VCE = 5 V
120%
100%
IF = 2mA
80%
60%
40%
20%
0%
Temperature (°C)
-55°
-35°
-15°
+5°
+25°
+45°
+65°
+85°
+105° +125°
Temperature (°C)
This product is built, tested and shipped from the USA
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue E 01/2014
Page 4 of 4
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com