SSR3045CTG Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com DESIGNER’S DATA SHEET 15 AMP per leg / 45 Volts LOW VOLTAGE DROP SCHOTTKY POWER DIODE CerPack COMMON CATHODE CENTERTAP Features: SSR3045CT • • • • __ __ │ └ Screening 2/ __ = Commercial │ TX = TX Level │ TXV = TXV Level │ S = S Level │ └ Package: G = CerPack • • Extremely Low Forward Voltage Drop Low reverse leakage Excellent high temperature performance Hermetically Sealed, low thermal resistance power Package Eutectic die attach and monometallic contacts for improved reliability TX, TXV, S-Level screening available Maximum Ratings Symbol Value Units VRWM VR 45 V IO 15 A IFSM 250 A ER 0.5 mJ TOP & TSTG -55 to +150 ºC R0JC 2.25 ºC/W Peak Repetitive Reverse Voltage and DC Blocking Voltage Average Rectified Forward Current Peak Surge Current PER LEG 8.3 ms pulse, half sinewave superimposed on Io; allow junction to reach equilibrium in between pulses; Ta= 25ºC L= 260 uH Peak Reverse Energy Operating & Storage Temperature (Junction to Case) Maximum Thermal Resistance PACKAGE OUTLINE: CERPACK .300 .105±.010 .340 .020 PINOUT: PIN 1: ANODE 1 PIN 2: ANODE 2 PAD: CATHODE .370 .315 1 2 .140 .210 .010±.002 2x .060 (.050) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. 2x .100 (.040) DATA SHEET #: SH0035A DOC SSR3045CTG Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics 1/ , per leg Symbol Min Typ Max Units –– 430 520 600 700 –– 600 –– 800 mV VF5 VF6 –– 400 600 500 700 mV IF = 5 A IF = 15 A VF7 VF8 –– 580 750 –– mV Reverse Leakage Current VR = 45V IR1 –– 10 50 µA Reverse Leakage Current, Tc= 100 oC VR = 45V IR2 –– 1500 –– µA Reverse Leakage Current, Tc= 125 oC VR = 45V IR3 –– 6.5 15 mA VR = 10V, f= 1 MHz Cj1 –– 500 600 pF Instantaneous Forward Voltage Drop IF = 1 A IF = 5 A IF = 10 A IF = 15 A VF1 VF2 VF3 VF4 Instantaneous Forward Voltage Drop, Tc= 125 oC IF = 5 A IF = 15 A Instantaneous Forward Voltage Drop, Tc= -55 oC Junction Capacitance NOTES: * Pulse Test: Pulse Width = 300µsec, Duty Cycle = 2%. 1/ Unless Otherwise Specified, All Electrical Characteristics @25oC 700 VF (mV) 650 600 550 500 450 25 C 400 -55 C 100 C 350 125 C 150 300 250 IF (A) 200 0 10 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. 20 DATA SHEET #: SH0035A 30 DOC