PG Series ECONOMICAL, CHASSIS MOUNT, SINGLE STAGE EMI/RFI LINE FILTER. MECHANICAL DIMENSIONS (Unit: mm) 3.7 2.00 3.0 4.4 L' L 40.0 MAX. G N 1.20 N' 68.5 MAX. FEATURES This economical PG series filter suppresses Line-to-Line and Line-to-Ground noise. Designed for easy mounting, this Chassis mount filter offers filters with current ratings up to 10 Amps at 250VAC. APPLICATIONS Computer & networking equipment, Measuring & control equipment, Data processing equipment, laboratory instruments, Switching power supplies, other electronic equipment. 0.5 TECHNICAL DATA • • • • • Rated Voltage: 250VAC Rated Current: 1A, 3A, 6A, 10A Power Line Frequency: 60Hz Leakage Current: 0.8mA, 250VAC Hipot Rating (one minute) Line to Ground: 2250VDC Line to Line: 1450VDC • Temperature Range: -25C to +85C 32 MAX. 25.5 MAX. 50.0 MAX. Specifications subject to change without notice. Dimensions (mm). 145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076 e-mail: [email protected] • www.powerdynamics.com 45 PG Series Example & Ordering Code PG 01 CURRENT RATING (A): = = = = S 01 03 06 10 TERMINAL: SOLDER CONNECT =S PG Series Attenuation Table Non-Medical Applications Insertion loss in dB (50 Ohm circuit) Current Rating Inductance in mH 1A 3A 6A 10A 3.7 1.8 0.7 0.3 Comm. Mode(L-G) MHz Diff. mode(L-L) MHz .15 .5 1 5 10 30 .15 .5 1 5 10 30 25 21 13 6 37 31 18 14 42 38 23 21 41 37 37 33 43 40 43 39 26 27 34 38 4 8 7 5 15 20 16 14 23 29 22 21 37 37 39 34 35 44 48 42 35 32 50 38 SCHEMATIC L' LINE Cx 0.1 F N Cy 3300pF x2 G' LOAD L mH L N' L mH 46 145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076 e-mail: [email protected] • www.powerdynamics.com