Project Number:

Project Number: Design Verification Test
Requested by: Brandon Harpenau
Tracking Code: TC0905—2213_Report Rev 4
Date: 5/20/2013
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Product Rev: MPS – Rev A, MPT – Rev C
Lot #: 0
Part description: Mini Power Strip
Test Start: 01/27/2009
Tech: Gary Lomax
Eng: Troy Cook
Rodney Riley
Eric Mings
Qty to test: 65
Test Completed: 4/16/2009
Design Verification Test Report
PART DESCRIPTION
MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Page 1 of 30
Tracking Code: TC0905—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
CERTIFICATION
All instruments and measuring equipment were calibrated to National Institute for Standards and Technology (NIST)
traceable standards according to IS0 10012-l and ANSI/NCSL 2540-1, as applicable.
All contents contained herein are the property of Samtec. No portion of this report, in part or in full shall be
reproduced without prior written approval of Samtec.
SCOPE
To perform the following tests: Design verification test. See test plan.
APPLICABLE DOCUMENTS
Standards: EIA Publication 364
TEST SAMPLES AND PREPARATION
1)
2)
3)
4)
5)
All materials were manufactured in accordance with the applicable product specification.
All test samples were identified and encoded to maintain traceability throughout the test sequences.
After soldering, the parts to be used for LLCR and DWV/IR testing were cleaned according to TLWI-0001.
Either an automated cleaning procedure or an ultrasonic cleaning procedure may be used.
The automated procedure is used with aqueous compatible soldering materials.
6) Parts not intended for testing LLCR and DWV/IR are visually inspected and cleaned if necessary.
7) Any additional preparation will be noted in the individual test sequences.
8) Solder Information: Lead Free Wave Solder
9) Samtec Test PCBs used: PCB-101627-TST-XX / PCB-101628-TST-XX / PCB-101629-TST-XX
Page 2 of 30
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
FLOWCHARTS
Current Carrying Capacity
TEST
STEP
01
3 Mated Assemblies Each
GROUP A "L" Plating
3 Mated Assembies
1 CONTACT
POWERED
CCC
GROUP B "L" Plating
3 Mated Assembies
2 CONTACTS POWERED
CCC
GROUP C "L" Plating
3 Mated Assembies
3 CONTACTS
POWERED
CCC
(TIN PLATING) - Tabulate calculated current at RT, 65° C, 75° C and 95° C
after derating 20% and based on 105° C
(GOLD PLATING) - Tabulate calculated current at RT, 85° C, 95° C and 115° C
after derating 20% and based on 125° C
CCC, Temp rise = EIA-364-70
Mating/Unmating/Gaps/Plating Verification
TEST
GROUP A "L" Plating
STEP
10 Boards
80 points
01
02
03
Contact Gaps
Mating / Unmating
Data Review
04
05
06
07
08
09
10
11
12
13
14
100 Cycles
Mating / Unmating
GROUP B "L"
Plating
Individual
Contacts (30) min
Setup Approve
Plating Verification
Data Review
Contact Gaps
Data Review
Thermal Aging (Mated)
Mating / Unmating
Contact Gaps
Data Review
Humidity (Mated)
Contact Gaps
Mating / Unmating
Thermal Aging = EIA-364-17, Test Condition 4, 105 deg C;
Time Condition 'B' (250 hours)
Humidity =EIA-364-31, Test Condition B (240 Hours)
and Method III (+25 ° C to +65 ° C @ 90%RH to 98% RH)
ambient pre-condition and delete steps 7a and 7b
Mating/Un-Mating Forces = EIA-364-13
Normal Force = EIA-364-04
(Perpendicular) displacement Force = 12.7 mm/min +/- 6 mm/min
Spec is 50 N @ 1 mm displacement
Contact Gaps/Height - No standard method. Usually measured optically
Page 3 of 30
GROUP D "L" Plating
3 Mated Assembies
4 CONTACTS
POWERED
CCC
GROUP E "L" Plating
3 Mated Assembies
ALL CONTACTS
POWERED
CCC
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
IR & DWV
TEST
GROUP A1
STEP
2 Mated Sets
Break Down
GROUP A2
GROUP A3
2 Unmated of Part # 2 Unmated of Mating
Being Tested
Part #
Break Down
Break Down
DWV/Break Down
Voltage
01
DWV/Break Down
Voltage
DWV/Break Down
Voltage
02
GROUP B
2 Mated Sets
IR & DWV at test voltage
(on both mated sets and on
each connector unmated)
Thermal Aging
(both sets unmated)
IR & DWV at test voltage
(on both mated sets and on
each connector unmated)
Cyclic Humidity
(both sets unmated)
IR & DWV at test voltage
(on both mated sets and on
each connector unmated)
03
04
05
* - DWV on group B to be performed at Test Voltage
DWV test voltage is equal to 75% of the lowest break down voltage from group A1, A2 or A3
Thermal Aging = EIA-364-17, Test Condition 4 (105 °C)
Time Condition 'B' (250 hours)
Humidity = EIA-364-31, Test Condition B (240 Hours)
and Method III (+25° C to +65° C @ 90%RH to 98% RH)
ambient pre-condition and delete steps 7a and 7b
IR = EIA-364-21
DWV = EIA-364-20
Durability/Thermal Age/Cyclic Humidity
TEST
GROUP A "L"
Plating
STEP
80 Points
100 Cycles
01
02
03
04
05
06
07
08
09
10
LLCR-1
Data Review
100 Cycles
LLCR-2
Data Review
Thermal Age
LLCR-3
Data Review
Cyclic Humidity
LLCR-4
Thermal Aging = EIA-364-17, Test Condition 4, 105 deg C;
Time Condition 'B' (250 hours)
Humidity =EIA-364-31, Test Condition B (240 Hours)
and Method III (+25 ° C to +65 ° C @ 90%RH to 98% RH)
ambient pre-condition and delete steps 7a and 7b
LLCR = EIA-364-23, LLCR
use Keithley 580 in the dry circuit mode, 10 mA Max
Page 4 of 30
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
Current Cycling Testing
TEST
STEP
GROUP A
8 samples min
All contacts wired in
series
Five contacts wired for
voltage drop
(or all contacts,
whichever is less)
01
500 Current Cycles
Testing to be performed in accordance with EIA-364-55
Test Condition B (125% of Rated current)
Test Method 4 (45 min On / 15 min Off) Temp Rise and Voltage Drop measured at 40 minutes into 'ON' cycle
Page 5 of 30
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
ATTRIBUTE DEFINITIONS
The following is a brief, simplified description of attributes.
THERMAL:
1)
2)
3)
4)
5)
EIA-364-17, Temperature Life with or without Electrical Load Test Procedure for Electrical Connectors.
Test Condition 4 at 105° C.
Test Time Condition B for 250 hours.
All test samples are pre-conditioned at ambient.
All test samples are exposed to environmental stressing in the mated condition.
HUMIDITY:
1)
2)
3)
4)
5)
Reference document: EIA-364-31, Humidity Test Procedure for Electrical Connectors.
Test Condition B, 240 Hours.
Method III, +25° C to + 65° C, 90% to 98% Relative Humidity excluding sub-cycles 7a and 7b.
All samples are pre-conditioned at ambient.
All test samples are exposed to environmental stressing in the mated condition.
TEMPERATURE RISE (Current Carrying Capacity, CCC):
1) EIA-364-70, Temperature Rise versus Current Test Procedure for Electrical Connectors and Sockets.
2
2) When current passes through a contact, the temperature of the contact increases as a result of I R (resistive)
heating.
3) The number of contacts being investigated plays a significant part in power dissipation and therefore
temperature rise.
4) The size of the temperature probe can affect the measured temperature.
5) Copper traces on PC boards will contribute to temperature rise:
a. Self heating (resistive)
b. Reduction in heat sink capacity affecting the heated contacts
6) A de-rating curve, usually 20%, is calculated.
7) Calculated de-rated currents at three temperature points are reported:
a. Ambient
о
b. 80 C
о
c. 95 C
о
d. 115 C
8) Typically, neighboring contacts (in close proximity to maximize heat build up) are energized.
9) The thermocouple (or temperature measuring probe) will be positioned at a location to sense the maximum
temperature in the vicinity of the heat generation area.
10) A computer program, TR 803.exe, ensures accurate stability for data acquisition.
11) Hook-up wire cross section is larger than the cross section of any connector leads/PC board traces, jumpers,
etc.
12) Hook-up wire length is longer than the minimum specified in the referencing standard.
CONTACT GAPS:
1) Gaps above the surrounding plastic surface were measured before and after stressing the contacts (e.g.
thermal aging, mechanical cycling, etc.).
2) Typically, all contacts on the connector are measured.
Page 6 of 30
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
MATING/UNMATING:
1) Reference document: EIA-364-13, Mating and Unmating Forces Test Procedure for Electrical Connectors.
2) The full insertion position was to within 0.003” to 0.004” of the plug bottoming out in the receptacle to
prevent damage to the system under test.
3) One of the mating parts is secured to a floating X-Y table to prevent damage during cycling.
NORMAL FORCE (FOR CONTACTS TESTED IN THE HOUSING):
1) Reference document: EIA-364-04, Normal Force Test Procedure for Electrical Connectors.
2) The contacts shall be tested in the connector housing.
3) If necessary, a “window” shall be made in the connector body to allow a probe to engage and deflect the
contact at the same attitude and distance (plus 0.05 mm [0.002”]) as would occur in actual use.
4) The connector housing shall be placed in a holding fixture that does not interfere with or otherwise influence
the contact force or deflection.
5) Said holding fixture shall be mounted on a floating, adjustable, X-Y table on the base of the Dillon TC2,
computer controlled test stand with a deflection measurement system accuracy of 5.0 µm (0.0002”).
6) The nominal deflection rate shall be 5 mm (0.2”)/minute.
7) Unless otherwise noted a minimum of five contacts shall be tested.
8) The force/deflection characteristic to load and unload each contact shall be repeated five times.
9) The system shall utilize the TC2 software in order to acquire and record the test data.
10) The permanent set of each contact shall be measured within the TC2 software.
11) The acquired data shall be graphed with the deflection data on the X-axis and the force data on the Y-axis
and a print out will be stored with the Tracking Code paperwork.
INSULATION RESISTANCE (IR):
To determine the resistance of insulation materials to leakage of current through or on the surface of these
materials when a DC potential is applied.
1) PROCEDURE:
a. Reference document: EIA-364-21, Insulation Resistance Test Procedure for Electrical Connectors.
b. Test Conditions:
i. Between Adjacent Contacts or Signal-to-Ground
ii. Electrification Time 2.0 minutes
iii. Test Voltage (500 VDC) corresponds to calibration settings for measuring resistances.
2) MEASUREMENTS:
3) When the specified test voltage is applied (VDC), the insulation resistance shall not be less than 5000
megohms.
Page 7 of 30
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
DIELECTRIC WITHSTANDING VOLTAGE (DWV):
To determine if the sockets can operate at its rated voltage and withstand momentary over potentials due to
switching, surges, and other similar phenomenon. Separate samples are used to evaluate the effect of
environmental stresses so not to influence the readings from arcing that occurs during the measurement
process.
1) PROCEDURE:
a. Reference document: EIA-364-20, Withstanding Voltage Test Procedure for Electrical Connectors.
b. Test Conditions:
i. Between Adjacent Contacts or Signal-to-Ground
ii. Barometric Test Condition 1
iii. Rate of Application 500 V/Sec
iv. Test Voltage (VAC) until breakdown occurs
2) MEASUREMENTS/CALCULATIONS
a. The breakdown voltage shall be measured and recorded.
b. The dielectric withstanding voltage shall be recorded as 75% of the minimum breakdown voltage.
c. The working voltage shall be recorded as one-third (1/3) of the dielectric withstanding voltage (onefourth of the breakdown voltage).
LLCR:
1) EIA-364-23, Low Level Contact Resistance Test Procedure for Electrical Connectors and Sockets.
2) A computer program, LLCR 221.exe, ensures repeatability for data acquisition.
3) The following guidelines are used to categorize the changes in LLCR as a result from stressing
a. <= +5.0 mOhms:----------------------------- Stable
b. +5.1 to +10.0 mOhms: ---------------------- Minor
c. +10.1 to +15.0 mOhms: -------------------- Acceptable
d. +15.1 to +50.0 mOhms: -------------------- Marginal
e. +50.1 to +2000 mOhms: ------------------- Unstable
f. >+2000 mOhms: ----------------------------- Open Failure
CURRENT CYCLING:
1) Reference document: EIA-364-55, Current Cycling Test Procedure for Electrical Connectors.
2) Reference document: EIA-364-06, Contact Resistance Test Procedure for Electrical Connectors.
a. This is a four-wire measurement.
3) An uninterruptible Power Supply maintained power to appropriate equipment.
a. A microprocessor controlled cycling fixture maintained accurate duty-cycle timing for test duration.
b. A calibrated constant current source provided consistent DC power during ON cycles
Page 8 of 30
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
RESULTS
Temperature Rise, CCC at a 20% de-rating
 CCC for a 30°C Temperature Rise -----------------------23.3A per contact with 1 contact powered
 CCC for a 30°C Temperature Rise -----------------------20.5A per contact with 2 adjacent contacts powered
 CCC for a 30°C Temperature Rise -----------------------19.4A per contact with 3 adjacent contacts powered
 CCC for a 30°C Temperature Rise -----------------------18.4A per contact with 4 adjacent contacts powered
 CCC for a 30°C Temperature Rise -----------------------17.2A per contact with all adjacent contacts powered
Contact Gaps
 Initial
o Min -------------------------------------------------- 1.8220 mm
o Max ------------------------------------------------- 1.9780 mm
 After 100 Cycles
o Min -------------------------------------------------- 1.8200 mm
o Max ------------------------------------------------- 1.9500 mm
 Thermal
o Min -------------------------------------------------- 1.8300 mm
o Max ------------------------------------------------- 1.9500 mm
 Humidity
o Min -------------------------------------------------- 1.8260 mm
o Max ------------------------------------------------- 1.9820 mm
Page 9 of 30
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
Mating – Unmating Forces
 Initial
o Mating
 Min --------------------------------------- 6.49 Lbs
 Max--------------------------------------- 9.20 Lbs
o Unmating
 Min --------------------------------------- 5.85 Lbs
 Max--------------------------------------- 7.30 Lbs
 After 25 Cycles
o Mating
 Min --------------------------------------- 7.39 Lbs
 Max--------------------------------------- 9.60 Lbs
o Unmating
 Min --------------------------------------- 6.69 Lbs
 Max--------------------------------------- 8.80 Lbs
 After 50 Cycles
o Mating
 Min --------------------------------------- 7.47 Lbs
 Max--------------------------------------10.00 Lbs
o Unmating
 Min --------------------------------------- 7.45 Lbs
 Max--------------------------------------10.00 Lbs
 After 75 Cycles
o Mating
 Min --------------------------------------- 7.86 Lbs
 Max--------------------------------------10.60 Lbs
o Unmating
 Min --------------------------------------- 8.08 Lbs
 Max--------------------------------------10.60 Lbs
 After 100 Cycles
o Mating
 Min --------------------------------------- 8.50 Lbs
 Max--------------------------------------11.10 Lbs
o Unmating
 Min --------------------------------------- 8.62 Lbs
 Max--------------------------------------11.20 Lbs
 Thermal
o Mating
 Min --------------------------------------- 5.87 Lbs
 Max--------------------------------------- 7.20 Lbs
o Unmating
 Min --------------------------------------- 5.81 Lbs
 Max--------------------------------------- 7.40 Lbs
 Humidity
o Mating
 Min --------------------------------------- 6.02 Lbs
 Max--------------------------------------- 7.10 Lbs
o Unmating
 Min --------------------------------------- 5.51 Lbs
 Max--------------------------------------- 7.10 Lbs
Page 10 of 30
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
Normal Force at 0.013” deflection
 Initial
o Min ----------------------------------------------- 628.50 g
o Max ---------------------------------------------- 858.20 g
 Thermal
o Min ----------------------------------------------- 596.40 g
o Max ---------------------------------------------- 996.40 g
Insulation Resistance minimums, IR Pin-to-Pin
 Initial
o Mated ----------------------------------------------100,000 Meg Ω
o Unmated ------------------------------------------100,000 Meg Ω
 Thermal
o Mated ----------------------------------------------100,000 Meg Ω
o Unmated ------------------------------------------100,000 Meg Ω
 Humidity
o Mated ----------------------------------------------- 12,000 Meg Ω
o Unmated ------------------------------------------- 12,000 Meg Ω
Set ----- 0.0002”
Set ----- 0.0021”
------------------------ Pass
------------------------ Pass
------------------------ Pass
------------------------ Pass
------------------------ Pass
------------------------ Pass
Dielectric Withstanding Voltage minimums, DWV Pin-to-Pin
 Minimums
o Breakdown Voltage -------------------------------- 2400 VAC
o Test Voltage ----------------------------------------- 1800 VAC
o Working Voltage ------------------------------------- 600 VAC
 Initial DWV -------------------------------------------------- Passed
 Thermal DWV ----------------------------------------------- Passed
 Humidity DWV ---------------------------------------------- Passed
LLCR Durability (80 LLCR test points)
 Initial ----------------------------------------------------------------- 0.5 mOhms Max
 Durability, 100 Cycles
o <= +5.0 mOhms ------------------------------------ 80 Points ------------------------- Stable
o +5.1 to +10.0 mOhms ----------------------------------- 0 Points ------------------------- Minor
o +10.1 to +15.0 mOhms --------------------------------- 0 Points ------------------------- Acceptable
o +15.1 to +50.0 mOhms --------------------------------- 0 Points ------------------------- Marginal
o +50.1 to +2000 mOhms --------------------------------- 0 Points ------------------------- Unstable
o >+2000 mOhms ------------------------------------------ 0 Points ------------------------- Open Failure
 Thermal
o <= +5.0 mOhms ------------------------------------ 80 Points ------------------------- Stable
o +5.1 to +10.0 mOhms ----------------------------------- 0 Points ------------------------- Minor
o +10.1 to +15.0 mOhms --------------------------------- 0 Points ------------------------- Acceptable
o +15.1 to +50.0 mOhms --------------------------------- 0 Points ------------------------- Marginal
o +50.1 to +2000 mOhms --------------------------------- 0 Points ------------------------- Unstable
o >+2000 mOhms ------------------------------------------ 0 Points ------------------------- Open Failure
 Humidity
o <= +5.0 mOhms ------------------------------------ 80 Points ------------------------- Stable
o +5.1 to +10.0 mOhms ----------------------------------- 0 Points ------------------------- Minor
o +10.1 to +15.0 mOhms --------------------------------- 0 Points ------------------------- Acceptable
o +15.1 to +50.0 mOhms --------------------------------- 0 Points ------------------------- Marginal
o +50.1 to +2000 mOhms --------------------------------- 0 Points ------------------------- Unstable
o >+2000 mOhms ------------------------------------------ 0 Points ------------------------- Open Failure
Page 11 of 30
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
Current Cycling – 500 Cycles, 45 minutes ON and 15 minutes OFF
 Test Current -----------------------------------------------21.5 A
 Temperature Change, Measured 30 minutes into the FIRST and LAST ON cycle
o Initial Temperature Change ------------------30.225°C
o Final Temperature Change -------------------28.525°C
Page 12 of 30
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
DATA SUMMARIES
TEMPERATURE RISE (Current Carrying Capacity, CCC):
1) High quality thermocouples whose temperature slopes track one another were used for temperature
monitoring.
2) The thermocouples were placed at a location to sense the maximum temperature generated during testing.
3) Temperature readings recorded are those for which three successive readings, 15 minutes apart, differ less
than 1° C (computer controlled data acquisition).
4) Adjacent contacts were powered:
Page 13 of 30
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
a. Linear configuration with 1 conductor/contact powered
TC0905--2213
1 (1x1) Contacts in Series
Part Numbers: MPS-08-01-L-RA-SD / MPT-08-02-L-RA-SD
Base Curve
Derated 20 %
RT Peak Amp
RT Derated Amp
Measured Current
85 ° C
Current Rating per Contact (30 Deg. Rise, 20% Derated) = 23.3 Amps
85 ° C Peak Amp
Room Temp=25.4 C
85 ° C Derated Amp
95 ° C
60.0
95 ° C Peak Amp
95 ° C Derated Amp
Limit
Maximum Current, Amp per Contact
53.7
115 ° C Peak Amp
115 ° C Derated Amp
50.0
115 ° C
Room Temp
42.9
40.0
125° C
Limit
33.7
30.0
29.2
27.0
23.3
20.0
16.6
13.3
Useful Range
10.0
0.0
20
40
60
80
Ambient Temperature, ° C
Page 14 of 30
100
120
140
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
b.
Linear configuration with 2 adjacent conductors/contacts powered
TC0905--2213
2 (1x2) Contacts in Series
Part Numbers: MPS-08-01-L-RA-SD / MPT-08-02-L-RA-SD
Base Curve
Derated 20 %
RT Peak Amp
RT Derated Amp
Measured Current
Current Rating per Contact (30 Deg. Rise, 20% Derated) = 20.5 Amps
85 ° C
85 ° C Peak Amp
Room Temp= 25.4 C
85 ° C Derated Amp
95 ° C
95 ° C Peak Amp
50.0
95 ° C Derated Amp
Limit
47.5
115 ° C Peak Amp
Maximum Current, Amp per Contact
115 ° C Derated Amp
115 ° C
Room Temp
40.0
38.0
125° C
Limit
30.0
29.8
25.7
23.8
20.5
20.0
14.5
11.6
10.0
Useful Range
0.0
20
40
60
80
Ambient Temperature, ° C
Page 15 of 30
100
120
140
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
c. Linear configuration with 3 adjacent conductors/contacts powered
TC0905--2213
3 (1x3) Contacts in Series
Part Numbers: MPS-08-01-L-RA-SD / MPT-08-02-L-RA-SD
Base Curve
Derated 20 %
RT Peak Amp
RT Derated Amp
Measured Current
Current Rating per Contact (30 Deg. Rise, 20% Derated) = 19.4 Amps
85 ° C
85 ° C Peak Amp
Room Temp= 23.5 C
50.0
85 ° C Derated Amp
95 ° C
95 ° C Peak Amp
95 ° C Derated Amp
45.5
Limit
Maximum Current, Amp per Contact
115 ° C Peak Amp
115 ° C Derated Amp
40.0
115 ° C
Room Temp
36.4
125° C
Limit
30.0
28.2
24.3
22.6
20.0
19.4
13.7
10.9
10.0
Useful Range
0.0
20
40
60
80
Ambient Temperature, ° C
Page 16 of 30
100
120
140
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
d. Linear configuration with 4 adjacent conductors/contacts powered
TC0905--2213
4 (1x4) Contacts in Series
Part Numbers: MPS-08-01-L-RA-SD / MPT-08-02-L-RA-SD
Base Curve
Derated 20 %
RT Peak Amp
RT Derated Amp
Measured Current
Current Rating per Contact (30 Deg. Rise, 20% Derated) = 18.4 Amps
85 ° C
50.0
85 ° C Peak Amp
Room Temp= 23.5 C
85 ° C Derated Amp
95 ° C
95 ° C Peak Amp
45.0
95 ° C Derated Amp
42.9
Limit
115 ° C Peak Amp
Maximum Current, Amp per Contact
40.0
115 ° C Derated Amp
115 ° C
Room Temp
35.0
34.3
125° C
Limit
30.0
26.6
25.0
22.9
21.3
20.0
18.4
15.0
13.0
10.4
10.0
Useful Range
5.0
0.0
20
40
60
80
Ambient Temperature, ° C
Page 17 of 30
100
120
140
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
e.
Linear configuration with all adjacent conductors/contacts powered
TC0905--2213
8 (All Power) Contacts in Series
Part Numbers: MPS-08-01-L-RA-SD / MPT-08-02-L-RA-SD
Base Curve
Derated 20 %
RT Peak Amp
RT Derated Amp
Measured Current
Current Rating per Contact (30 Deg. Rise, 20% Derated) = 17.2 Amps
85 ° C
45.0
85 ° C Peak Amp
Room Temp= 24.5 C
85 ° C Derated Amp
95 ° C
95 ° C Peak Amp
40.2
40.0
95 ° C Derated Amp
Limit
Maximum Current, Amp per Contact
115 ° C Peak Amp
115 ° C Derated Amp
35.0
115 ° C
Room Temp
32.2
30.0
25.0
25.0
20.0
20.0
125° C
Limit
21.5
17.2
15.0
12.1
10.0
9.7
Useful Range
5.0
0.0
20
40
60
80
Ambient Temperature, ° C
Page 18 of 30
100
120
140
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
CONTACT GAPS:
Initial
Measured in mm
Minimum
1.8220
Maximum
1.9780
Average
1.9184
St. Dev.
0.0352
Count
80
After 100 Cycles
Measured in mm
Minimum
1.8200
Maximum
1.9500
Average
1.8887
St. Dev.
0.0328
Count
80
Thermal
Measured in mm
Minimum
1.8300
Maximum
1.9500
Average
1.8939
St. Dev.
0.0295
Count
80
Humidity
Measured in mm
Minimum
1.8260
Maximum
1.9820
Average
1.8965
St. Dev.
0.0370
Count
80
MATING/UNMATING:
Initial
Unmating
Mating
Minimum
Maximum
Average
Mating
Force (Oz)
Force (Lbs)
Force (Oz)
Force (Lbs)
Force (Oz)
Force (Lbs)
Force (Oz)
Force (Lbs)
103.9
147.7
120.7
6.49
9.2
7.5
93.5
116.6
105.8
5.85
7.3
6.6
118.2
153.3
131.8
7.39
9.6
8.2
107.1
140.2
121.6
6.69
8.8
7.6
After 50 Cycles
Mating
Unmating
Minimum
Maximum
Average
Mating
Maximum
Average
Force (Lbs)
Force (Oz)
Force (Lbs)
Force (Oz)
Force (Lbs)
Force (Oz)
Force (Lbs)
119.6
160.3
143.3
7.47
10.0
9.0
119.2
159.2
138.8
7.45
10.0
8.7
125.8
169.8
150.8
7.86
10.6
9.4
129.3
170.2
147.5
8.08
10.6
9.2
Minimum
Average
After Thermals
Mating
Unmating
Force (Oz)
Force (Lbs)
Force (Oz)
Force (Lbs)
Force (Oz)
Force (Lbs)
Force (Oz)
Force (Lbs)
136.0
177.4
156.9
8.50
11.1
9.8
137.9
178.6
154.2
8.62
11.2
9.6
93.9
114.4
103.8
5.87
7.2
6.5
93.0
118.9
103.7
5.81
7.4
6.5
Mating
Maximum
After 75 Cycles
Unmating
Force (Oz)
After 100 Cycles
Mating
Unmating
Minimum
After 25 Cycles
Unmating
After Humidity
Unmating
Force (Oz)
Force (Lbs)
Force (Oz)
Force (Lbs)
96.3
113.4
101.3
6.02
7.1
6.3
88.2
114.1
99.7
5.51
7.1
6.2
Page 19 of 30
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
NORMAL FORCE (FOR CONTACTS TESTED IN THE HOUSING):
1) Calibrated force gauges are used along with computer controlled positioning equipment.
2) For Normal force 8-10 measurements are taken and the averages reported.
Normal Force - Average Initial vs Average Thermal
900.00
777.53
800.00
712.17
760.4
700.00
639.10
Force-Grams
600.00
565.29
489.76
500.00
411.71
695.9
623.8
551.0
477.9
400.00
402.6
331.83
300.00
326.5
250.08
248.3
200.00
168.26
167.0
100.00
83.88
84.0
0.00
0.0013
0.0026
0.0039
0.0052
0.0065
0.0078
0.0091
0.0104
Deflection
Initial
Averages
Min
Max
St. Dev
Count
0.0013
83.98
66.00
111.10
11.552
12
Deflections in inches Forces in Grams
0.0026
0.0039
0.0052
0.0065
167.02
248.28
326.45
402.56
141.20
211.50
278.90
343.10
203.30
300.30
390.40
474.00
16.423
23.445
30.682
37.356
12
12
12
12
0.0078
477.93
406.10
553.00
44.908
12
0.0091
550.97
467.70
630.80
52.155
12
0.0104
623.83
524.90
718.30
60.175
12
0.0117
695.88
575.50
802.80
67.687
12
0.0130
760.37
628.50
858.20
67.699
12
SET
0.0007
0.0002
0.0021
0.0007
12
0.0013
83.88
62.60
109.80
12.827
12
Deflections in inches Forces in Grams
0.0026
0.0039
0.0052
0.0065
168.26
250.08
331.83
411.71
125.20
187.80
248.80
308.80
216.90
318.70
428.30
529.60
23.591
34.751
48.442
61.042
12
12
12
12
0.0078
489.76
367.40
628.20
74.589
12
0.0091
565.29
425.50
726.50
87.649
12
0.0104
639.10
484.10
835.90
98.656
12
0.0117
712.17
539.80
940.20
108.942
12
0.0130
777.53
596.40
996.40
108.695
12
SET
0.0004
0.0001
0.0009
0.0003
12
After Thermals
Averages
Min
Max
St. Dev
Count
0.0117
0.0130
Average Initial Normal Force
Average Normal Force after Thermals
Page 20 of 30
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
INSULATION RESISTANCE (IR):
Mated
MPS/MPT
100000
100000
12000
Minimum
Initial
Thermal
Humidity
Pin to Pin
Unmated
MPS
100000
100000
100000
Unmated
MPT
100000
100000
12000
DIELECTRIC WITHSTANDING VOLTAGE (DWV):
Voltage Rating Summary
Minimum
MPS/MPT
2400
1800
600
Break Down Voltage
Test Voltage
Working Voltage
Pin to Pin
Initial Test Voltage
After Thermal Test Voltage
After Humidity Test Voltage
Passed
Passed
Passed
LLCR:
1)
2)
3)
4)
A total of 80 points were measured.
EIA-364-23, Low Level Contact Resistance Test Procedure for Electrical Connectors and Sockets.
A computer program, LLCR 221.exe, ensures repeatability for data acquisition.
The following guidelines are used to categorize the changes in LLCR as a result from stressing.
a. <= +5.0 mOhms:----------------------------- Stable
b. +5.1 to +10.0 mOhms: ---------------------- Minor
c. +10.1 to +15.0 mOhms: -------------------- Acceptable
d. +15.1 to +50.0 mOhms: -------------------- Marginal
e. +50.1 to +2000 mOhms -------------------- Unstable
f. >+2000 mOhms: ----------------------------- Open Failure
Date Feb. 18 2009 Feb. 18 2009 Mar. 10 2009 Mar. 24 2009
Room Temp C
23
22
23
24
RH
31%
28%
40%
24%
Name
Marshall
Lomax
RILEY
RILEY
mOhm values
Actual
Delta
Delta
Delta
Initial
100 Cycles
Thermal
Humidity
Average
0.4
0.1
0.0
0.0
St. Dev.
0.1
0.1
0.0
0.0
Min
0.2
-0.1
-0.1
-0.1
Max
0.5
0.2
0.2
0.2
Count
80
80
80
80
Page 21 of 30
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
DATA
CONTACT GAPS:
Initial
Measured in mm
Pos.#
B1
B2
1
1.928
1.91
2
1.952
1.926
3
1.912
1.932
4
1.9
1.886
5
1.93
1.83
6
1.96
1.922
7
1.86
1.918
8
1.918
1.924
After 100 Cycles
Measured in mm
Pos.#
B1
B2
1
1.878
1.892
2
1.914
1.904
3
1.912
1.92
4
1.878
1.852
5
1.918
1.826
6
1.928
1.91
7
1.832
1.898
8
1.876
1.896
After Thermal
Measured in mm
Pos.#
B1
B2
1
1.88
1.898
2
1.908
1.91
3
1.9
1.918
4
1.884
1.878
5
1.914
1.844
6
1.938
1.92
7
1.834
1.91
8
1.876
1.898
After Humidity
Measured in mm
Pos.#
B1
B2
1
1.834
1.878
2
1.934
1.892
3
1.852
1.886
4
1.874
1.852
5
1.874
1.826
6
1.906
1.914
7
1.918
1.89
8
1.844
1.93
B3
1.896
1.898
1.898
1.902
1.904
1.86
1.926
1.928
B4
1.94
1.954
1.95
1.924
1.89
1.93
1.916
1.956
B5
1.85
1.858
1.944
1.926
1.948
1.942
1.964
1.948
B6
1.91
1.932
1.85
1.822
1.912
1.968
1.95
1.874
B7
1.976
1.94
1.956
1.918
1.934
1.96
1.944
1.946
B8
1.89
1.922
1.862
1.916
1.934
1.964
1.964
1.878
B9
1.924
1.948
1.94
1.918
1.898
1.94
1.87
1.892
B10
1.94
1.96
1.978
1.958
1.848
1.894
1.884
1.9
B3
1.866
1.878
1.864
1.87
1.862
1.846
1.906
1.908
B4
1.87
1.918
1.92
1.886
1.854
1.884
1.874
1.914
B5
1.826
1.83
1.912
1.874
1.922
1.928
1.936
1.91
B6
1.88
1.9
1.83
1.834
1.884
1.928
1.95
1.842
B7
1.92
1.91
1.93
1.89
1.904
1.918
1.916
1.922
B8
1.848
1.886
1.82
1.914
1.9
1.92
1.926
1.846
B9
1.89
1.908
1.906
1.894
1.866
1.91
1.844
1.86
B10
1.91
1.922
1.944
1.928
1.842
1.85
1.852
1.862
B3
1.892
1.882
1.88
1.88
1.92
1.858
1.92
1.914
B4
1.904
1.9
1.914
1.886
1.86
1.898
1.888
1.908
B5
1.844
1.87
1.926
1.898
1.938
1.94
1.94
1.916
B6
1.9
1.934
1.84
1.834
1.89
1.95
1.918
1.872
B7
1.924
1.9
1.918
1.882
1.904
1.922
1.902
1.908
B8
1.864
1.878
1.83
1.874
1.908
1.93
1.922
1.854
B9
1.898
1.904
1.9
1.892
1.864
1.876
1.832
1.836
B10
1.916
1.91
1.944
1.928
1.85
1.872
1.866
1.876
B3
1.89
1.87
1.872
1.87
1.91
1.85
1.94
1.898
B4
1.904
1.898
1.91
1.886
1.876
1.906
1.902
1.876
B5
1.832
1.866
1.934
1.9
1.968
1.958
1.962
1.908
B6
1.898
1.924
1.83
1.836
1.904
1.928
1.922
1.878
B7
1.94
1.912
1.948
1.9
1.896
1.95
1.916
1.952
B8
1.856
1.908
1.838
1.91
1.9
1.922
1.898
1.856
B9
1.94
1.924
1.89
1.918
1.854
1.884
1.832
1.83
B10
1.982
1.86
1.964
1.912
1.882
1.946
1.872
1.916
Page 22 of 30
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
MATING/UNMATING:
After 50 Cycles
After 75 Cycles
After 100 Cycles
After Thermals
After Humidity
Sample#
1
2
3
4
5
Mating
Initial
Unmating
After 25 Cycles
Mating
Unmating
Mating
Unmating
Mating
Unmating
Mating
Unmating
Mating
Unmating
Mating
Unmating
8.87
8.04
6.57
8.16
6.49
7.26
7.29
5.85
6.14
6.26
8.36
7.85
7.79
8.22
8.20
6.98
7.50
7.44
7.18
7.58
8.44
8.76
8.58
8.53
9.39
8.26
8.37
8.04
8.33
8.82
9.26
9.14
8.95
9.29
9.80
8.67
8.71
8.34
9.04
9.30
9.33
9.59
9.39
9.48
10.35
8.62
9.11
8.87
9.35
9.81
6.30
6.40
6.14
5.87
6.41
5.99
6.38
6.29
5.81
6.38
6.12
6.36
6.11
6.31
6.51
5.90
6.37
6.11
5.51
6.19
6
7
8
9
10
6.69
9.23
7.09
6.90
7.40
6.43
6.47
6.58
6.83
7.00
7.39
9.58
8.79
8.61
7.60
6.69
7.85
8.76
8.42
7.63
7.47
9.91
9.77
10.02
8.69
7.45
9.13
9.77
9.95
8.64
7.86
9.79
10.35
10.61
9.19
8.08
9.80
10.44
10.64
9.15
8.50
10.20
10.54
11.09
9.59
8.72
10.44
10.72
11.16
9.56
6.12
6.51
7.15
6.99
6.96
6.02
6.71
7.43
6.85
6.98
6.02
6.18
6.24
7.09
6.40
6.01
6.35
6.35
7.13
6.37
NORMAL FORCE (FOR CONTACTS TESTED IN THE HOUSING), Initial:
Initial
Sample #
1
2
3
4
5
6
7
8
9
10
11
12
0.0013
87.8
86.9
80.9
91.0
83.6
87.3
68.8
66.0
111.1
83.3
86.1
75.0
Deflections in inches, Forces in Grams
0.0026
0.0039
0.0052
0.0065
170.4
249.2
322.9
396.3
169.9
243.1
308.8
368.7
162.7
241.6
316.7
391.0
181.2
267.6
348.7
425.4
164.6
242.5
321.8
401.1
171.7
252.3
332.1
408.7
141.2
211.5
278.9
343.1
144.4
220.7
294.5
373.7
203.3
300.3
390.4
474.0
171.7
267.2
363.5
455.9
169.4
253.6
336.1
419.6
153.7
229.7
303.0
373.2
0.0078
468.7
424.8
461.6
498.7
482.5
481.6
406.1
455.6
553.0
544.3
516.8
441.4
0.0091
543.6
479.4
533.7
569.1
561.5
552.8
467.7
534.8
620.3
630.8
611.4
506.5
0.0104
622.3
534.0
603.5
639.5
641.5
622.8
524.9
614.9
686.8
718.3
700.3
577.1
0.0117
700.4
594.7
673.4
705.1
722.6
692.5
575.5
693.8
745.5
802.8
789.4
654.8
0.0130
767.1
653.7
742.5
767.5
798.8
760.7
628.5
768.2
792.4
858.2
852.2
734.6
SET
0.0002
0.0021
0.0002
0.0002
0.0002
0.0003
0.0009
0.0003
0.0021
0.0006
0.0004
0.0005
NORMAL FORCE (FOR CONTACTS TESTED IN THE HOUSING), After Thermals:
After Thermals
Sample #
1
2
3
4
5
6
7
8
9
10
11
12
0.0013
81.4
82.6
97.6
109.8
75.1
90.5
94.7
73.2
62.6
82.3
84.5
72.3
Deflections in inches, Forces in Grams
0.0026
0.0039
0.0052
0.0065
159.1
235.4
311.3
384.4
166.5
248.2
332.1
418.0
194.9
295.1
403.6
510.3
216.9
318.7
428.3
529.6
150.4
219.9
293.1
368.1
178.2
263.3
345.0
421.4
186.1
275.3
358.1
439.3
160.3
245.2
329.3
417.9
125.2
187.8
248.8
308.8
161.6
235.7
305.6
375.4
167.8
248.6
325.7
396.0
152.1
227.8
301.1
371.3
0.0078
459.8
501.4
618.9
628.2
441.3
498.0
517.4
505.6
367.4
443.1
459.3
436.7
Page 23 of 30
0.0091
533.3
583.6
726.5
718.7
514.0
571.2
593.4
591.3
425.5
505.9
522.7
497.4
0.0104
606.8
669.7
835.9
789.2
586.2
645.9
668.1
674.5
484.1
568.7
583.6
556.5
0.0117
680.1
757.9
940.2
846.7
659.8
727.8
750.6
756.2
539.8
629.4
643.8
613.7
0.0130
756.5
837.3
996.4
890.9
731.4
798.1
828.3
830.3
596.4
689.3
704.2
671.2
SET
0.0002
0.0004
0.0008
0.0009
0.0003
0.0002
0.0001
0.0002
0.0003
0.0002
0.0002
0.0004
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
INSULATION RESISTANCE (IR):
Initial Insulation Resistance
Measured In Meg Ohms
Sample#
1
2
Mated
X
MPS/MPT
100,000
100,000
Pin to Pin
Unmated
X
X
MPS
MPT
100,000
100,000
100,000
100,000
Thermal Insulation Resistance
Measured In Meg Ohms
Sample#
1
2
Mated
X
MPS/MPT
100000
100000
Pin to Pin
Unmated
X
X
MPS
MPT
100000
100000
100000
100000
Humidity Insulation Resistance
Measured In Meg Ohms
Sample#
1
2
Mated
X
MPS/MPT
100,000
12,000
Pin to Pin
Unmated
X
X
MPS
MPT
100,000
100,000
100,000
12,000
Page 24 of 30
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
DIELECTRIC WITHSTANDING VOLTAGE (DWV):
Initial DWV
Test Voltage= 1800
Sample#
1
2
Mated
MPS/MPT
1800
1800
Pin to Pin
Unmated
MPS
1800
1800
MPT
1800
1800
Thermal Test Voltage
Test Voltage= 1800
Sample#
1
2
Mated
MPS/MPT
1800
1800
Pin to Pin
Unmated
MPS
1800
1800
MPT
1800
1800
Humidity Test Voltage
Test Voltage= 1800
Sample#
1
2
Mated
MPS/MPT
1800
1800
Pin to Pin
Unmated
MPS
1800
1800
Page 25 of 30
MPT
1800
1800
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
LLCR:
Board
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
6
mOhm
values
Position
P1
P2
P3
P4
P5
P6
P7
P8
P1
P2
P3
P4
P5
P6
P7
P8
P1
P2
P3
P4
P5
P6
P7
P8
P1
P2
P3
P4
P5
P6
P7
P8
P1
P2
P3
P4
P5
P6
P7
P8
P1
Actual
Initial
0.4
0.4
0.4
0.3
0.3
0.3
0.3
0.3
0.4
0.4
0.4
0.3
0.4
0.3
0.3
0.3
0.4
0.4
0.4
0.3
0.3
0.3
0.3
0.3
0.4
0.4
0.4
0.3
0.4
0.4
0.3
0.4
0.4
0.4
0.4
0.3
0.3
0.3
0.3
0.3
0.4
Delta
100 Cycles
0.1
0.1
0.0
0.1
0.1
0.1
0.1
0.1
0.1
0.0
0.0
0.0
0.0
0.1
0.0
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.0
0.1
0.1
0.0
0.0
0.0
0.0
0.1
0.1
0.1
0.1
0.1
Delta
Thermal
0.0
0.0
0.0
0.1
0.1
0.1
0.1
0.1
0.0
0.0
0.0
0.1
0.0
0.0
0.0
0.1
0.0
0.0
0.0
0.0
0.1
0.1
0.0
0.0
0.0
0.0
0.0
0.1
0.1
0.0
0.0
0.1
0.0
0.0
0.0
0.0
0.0
0.1
0.0
0.0
0.1
Page 26 of 30
Delta
Humidity
0.1
0.0
0.1
0.1
0.1
0.1
0.0
0.1
0.0
-0.1
-0.1
0.0
-0.1
0.1
0.0
0.1
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.1
0.0
0.0
0.0
0.0
0.0
0.0
0.1
0.1
0.0
0.0
0.0
0.0
0.0
0.1
0.0
0.0
0.1
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
9
9
9
9
9
9
9
9
10
10
10
10
10
10
10
10
P2
P3
P4
P5
P6
P7
P8
P1
P2
P3
P4
P5
P6
P7
P8
P1
P2
P3
P4
P5
P6
P7
P8
P1
P2
P3
P4
P5
P6
P7
P8
P1
P2
P3
P4
P5
P6
P7
P8
0.4
0.5
0.4
0.5
0.3
0.3
0.2
0.3
0.3
0.3
0.4
0.3
0.3
0.3
0.3
0.5
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.3
0.3
0.3
0.4
0.4
0.4
0.3
0.3
0.3
0.3
0.4
0.1
0.0
0.1
0.0
0.1
0.1
0.2
0.2
0.2
0.1
0.1
0.2
0.2
0.2
0.2
0.0
0.1
0.1
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.1
0.1
0.1
0.0
0.1
0.0
0.0
0.0
0.0
0.0
-0.1
Page 27 of 30
0.1
-0.1
0.1
-0.1
0.1
0.1
0.2
0.1
0.1
0.1
0.0
0.1
0.1
0.1
0.1
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.1
0.0
0.0
0.0
0.1
0.1
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.1
-0.1
0.0
-0.1
0.1
0.1
0.2
0.1
0.0
0.1
0.0
0.1
0.1
0.1
0.1
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
-0.1
-0.1
0.0
0.0
0.0
0.1
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
EQUIPMENT AND CALIBRATION SCHEDULES
Equipment #: PS-07
Description: 20 V, 120 A DC Power Supply - AutoRanging SO/HPIB
Manufacturer: Hewlett Packard / Agilent
Model: AT-6031A
Serial #: 2721A00648
Accuracy: See Manual Current Carrying Capacity (CCC) Chamber
… Last Cal: 06/16/2008, Next Cal: 06/16/2009
Equipment #: MO-04
Description: Multimeter /Data Acquisition System
Manufacturer: Keithley
Model: 2700
Serial #: 0798688
Accuracy: See Manual - DO NOT USE UNTIL CALIBRATED.
… Last Cal: 03/10/08, Next Cal: 03/10/09
Equipment #: MO-06
Description: Micro-Ohmeter
Manufacturer: Keithley
Model: 580
Serial #: 1110525
Accuracy: See Manual
… Last Cal: 06/17/2008, Next Cal: 06/17/2009
Equipment #: MO-07
Description: Multimeter / Data Acquistion System
Manufacturer: Keithley
Model: 2700
Serial #: 1116559
Accuracy: See Manual
… Last Cal: 6/17/2008, Next Cal: 6/17/2009
Equipment #: MO-01
Description: Micro-Ohmeter
Manufacturer: Keithley
Model: 580
Serial #: 0772740
Accuracy: See Manual
… Last Cal: 06/17/08, Next Cal: 06/17/09
Equipment #: MO-03
Description: Multimeter /Data Acquisition System
Manufacturer: Keithley
Model: 2700
Serial #: 0791975
Accuracy: See Manual
… Last Cal: 06/17/08, Next Cal: 06/17/09
Page 28 of 30
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
Equipment #: MV-05
Description: 6" x 6" Video Measuring Machine
Manufacturer: Micro-Vu
Model: M3010838
Serial #: V9344
Accuracy: See Manual See Manual
… Last Cal: 02/10/2009, Next Cal: 02/10/2010
Equipment #: OV-03
Description: Cascade Tek Forced Air Oven
Manufacturer: Cascade Tek
Model: TFO-5
Serial #: 0500100
Accuracy: Temp. Stability: +/-.1C/C change in ambient
… Last Cal: 06/17/2009, Next Cal: 06/17/2010
Equipment #: TCT-01
Description: Test Stand
Manufacturer: Chatillon
Model: TCD-1000
Serial #: 05 23 00 02
Accuracy: Speed Accuracy: +/-5% of max speed; Displacement: +/-.5% or +/-.005, whichever is greater.
… Last Cal: 8/12/08, Next Cal: 8/12/09
Equipment #: TCT-03
Description: Dillon Quantrol TC2 Test Stand
Manufacturer: Dillon Quantrol
Model: TC2
Serial #: 02-1033-03
Accuracy: Speed Accuracy: +/- 5% of indicated speed; Displacement: +/- 5 micrometers.
… Last Cal: 5/6/2008, Next Cal: 5/6/2009
Equipment #: TCT-04
Description: Dillon Quantrol TC21 25-1000 mm/min series test stand
Manufacturer: Dillon Quantrol
Model: TC2 I series test stand
Serial #: 2721A00648
Accuracy: Speed Accuracy: +/- 5% of indicated speed; Speed Accuracy: +/- 5% of indicated speed;
… Last Cal: 5/6/2008, Next Cal: 5/6/2009
Equipment #: HPM-01
Description: Hipot Megommeter
Manufacturer: Hipotronics
Model: H306B-A
Serial #: M9905004
Accuracy: 2 % Full Scale Accuracy
… Last Cal: 06/22/07, Next Cal: 06/22/08
Page 29 of 30
Tracking Code: TC095—2213_Report Rev 4
Part #: MPS-08-01-01-L-RA-SD / MPT-08-01-01-L-RA-SD
Part description: Mini Power Strip
Equipment #: THC-04
Description: Temperature/Humidity Chamber
Manufacturer: Thermotron
Model: SM-8-3800
Serial #: 37782
Accuracy: See Manual
… Last Cal: 04/07/2009, Next Cal: 04/07/2010
Page 30 of 30