RBR2MM40A : Diode

Schottky Barrier Diode
Data Sheet
RBR2MM40A
lApplication
lDimensions (Unit : mm)
General rectification
lLand Size Figure (Unit : mm)
0.1±0.1
0.05
1.2
0.85
1.6±0.1
2.6±0.1
1) Small power mold type
(PMDU)
3.5±0.2
3.05
lFeatures
PMDU
2) High reliability
Cathode
3) Low VF
lStructure
0.9±0.1
0.8±0.1
ROHM : PMDU
JEDEC : SOD-123FL
: Manufacture Date
Anode
lTaping Dimensions (Unit : mm)
φf 1.55±0.05
0.25±0.05
1.81±0.1
4.0±0.1
8.0±0.2
3.5±0.05
2.0±0.05
3.71±0.1
4.0±0.1
Silicon epitaxial planar type
1.75±0.1
lConstruction
f 1.0±0.1
φ
1.5MAX
lAbsolute Maximum Ratings (Tc= 25°C)
Parameter
Symbol
Conditions
Limits
Unit
Repetitive peak reverse voltage
VRM
Duty≦0.5
40
V
Reverse voltage
VR
Direct reverse voltage
40
V
Average forward rectified current
Io
Glass epoxy board mounted, 60Hz half sin wave,
2
A
20
A
Non-repetitive forward current surge peak
IFSM
resistive load , Tc=73ºC Max.
60Hz half sin wave, one cycle,
non-repetitive at Ta=25ºC
Tj
-
150
°C
Tstg
-
-55 to +150
°C
Operating junction temperature
Storage temperature
lElectrical Characteristics (Tj= 25°C)
Parameter
Symbol
Conditions
Min.
Forward voltage
VF
IF=2.0A
-
-
0.62
V
Reverse current
IR
VR=40V
-
-
50
mA
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
1/5
Typ. Max. Unit
2015.03 - Rev.A
Data Sheet
RBR2MM40A
lElectrical Characteristic Curves
10
100000
REVERSE CURRENT : IR (mA)
FORWARD CURRENT : IF (A)
Tj = 150°C
Tj = 150°C
1
Tj = 125°C
0.1
Tj = 75°C
Tj = 25°C
10000
1000
Tj = 125°C
100
Tj = 75°C
10
1
Tj = 25°C
0.1
Tj = -25°C
Tj = -25°C
0.01
0.01
0
200
400
600
800
1000 1200
0
FORWARD VOLTAGE : VF(mV)
VF-IF CHARACTERISTICS
20
30
40
REVERSE VOLTAGE : VR(V)
VR-IR CHARACTERISTICS
600
1000
Tj = 25°C
f = 1MHz
FORWARD VOLTAGE : VF (mV)
CAPACITANCE BETWEEN
TERMINALS : Ct (pF)
10
100
10
Tj=25°C
IF=2.0A
n=30pcs
590
580
570
560
550
Ave. : 530mV
540
530
520
510
500
0
5
10
15
20
25
30
REVERSE VOLTAGE : VR(V)
VR-Ct CHARACTERISTICS
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
VF DISPERSION MAP
2/5
2015.03 - Rev.A
Data Sheet
RBR2MM40A
lElectrical Characteristic Curves
20
220
REVERSE CURRENT : IR (mA)
18
16
14
12
10
Ave. : 7.4mA
8
6
4
210
205
200
195
190
180
175
0
170
IR DISPERSION MAP
Ct DISPERSION MAP
40
180
IFSM
1cyc
8.3ms
Ta=25°C
140
120
100
Ave. : 55A
60
40
20
REVERSE RECOVERY TIME : trr (ns)
PEAK SURGE
FORWARD CURRENT : IFSM (A)
200
80
Ave. : 185pF
185
2
160
Tj=25°C
f=1MHz
VR=0V
n=10pcs
215
CAPACITANCE BETWEEN
TERMINALS : Ct (pF)
Tj=25°C
VR=40V
n=30pcs
0
Tj=25°C
IF=0.5A
IR=1.0A
Irr / IR=0.25
n=10pcs
35
30
25
20
15
Ave. : 9.3ns
10
5
0
IFSM DISPERSION MAP
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
trr DISPERSION MAP
3/5
2015.03 - Rev.A
Data Sheet
RBR2MM40A
lElectrical Characteristic Curves
100
90
IFSM
80
8.3 8.3
ms ms
70
1cyc
PEAK SURGE
FORWARD CURRENT : IFSM (A)
PEAK SURGE
FORWARD CURRENT : IFSM (A)
100
Ta=25°C
60
50
40
30
20
10
90
time
70
Ta=25°C
60
50
40
30
20
10
0
0
1
10
1
100
NUMBER OF CYCLES
IFSM-CYCLE CHARACTERISTICS
10
100
TIME : t (ms)
IFSM-t CHARACTERISTICS
2.5
1000
Tj = 150°C
Rth(j-a)
2.0
100
Rth(j-c)
10
Glass epoxy board mounted
IM=100mA
IF=2.0A
1
FORWARD POWER
DISSIPATION : PF (W)
TRANSIENT
THERMAL IMPEDANCE : Rth (°C/W)
1cyc
IFSM
80
time
D = 1/2
1.5
Sin(θ=180)
DC
1.0
0.5
1ms 300ms
0.1
0.001
0.0
0.01
0.1
1
10
100
1000
0
TIME : t (s)
Rth-t CHARACTERISTICS
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
1
2
3
4
AVERAGE RECTIFIED
FORWARD CURRENT : Io (A)
Io-PF CHARACTERISTICS
4/5
2015.03 - Rev.A
Data Sheet
RBR2MM40A
lElectrical Characteristic Curves
0.8
6
Tj = 150°C
Glass epoxy board mounted
AVERAGE RECTIFIED
FORWARD CURRENT : Io (A)
REVERSE POWER
DISSIPATION : PR (W)
0.7
0.6
0.5
0.4
Sin(θ=180)
D = 1/2
0.3
DC
0.2
0.1
5
IO
0A
0V
4
VR
T
DC
3
D=t/T
VR=VRM/2
Tj=150°C
D = 1/2
2
1
Sin(θ=180)
0
0.0
0
10
20
30
0
40
6
t
T
4
DC
3
ELECTROSTATIC
DISCHARGE TEST : ESD (kV)
IO
0A
0V
VR
D=t/T
VR=VRM/2
Tj=150°C
D = 1/2
2
Sin(θ=180)
1
0
25
50
75
100
125
100
125
150
25
20
15
10
Ave. : 7.5kV
5
C=200pF
R=0W
C=100pF
R=1.5kW
150
CASE TEMPERATURE : Tc (°C)
DERATING CURVE (Io-Tc)
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
75
No destruction at 30kV
0
0
50
30
Glass epoxy board mounted
5
25
AMBIENT TEMPERATURE : Ta (°C)
DERATING CURVE (Io-Ta)
REVERSE VOLTAGE : VR (V)
VR-PR CHARACTERISTICS
AVERAGE RECTIFIED
FORWARD CURRENT : Io (A)
t
ESD DISPERSION MAP
5/5
2015.03 - Rev.A
Notice
Notes
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifications :
3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
7) The Products specified in this document are not designed to be radiation tolerant.
8) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
9) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
11) ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
12) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
13) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
R1102A