MOS FET Relays G3VM-61PR Smallest Class in market, USOP Package MOS FET Relays (COFF (typical): 20 pF, RON (typical): 1 Ω) with Low Output Capacitance and ON Resistance (C × R = 20 pF•Ω) in a 60-V Load Voltage Model. • ON resistance of 1 Ω (typical) suppresses output signal attenuation. Note: The actual product is marked differently from the image shown here. RoHS compliant ■ Application Examples • Semiconductor inspection tools • Measurement devices • Broadband systems • Data loggers ■ List of Models (Ask your OMRON representative for delivery times.) Contact form SPST-NO Note: Terminals Surface-mounting terminals Load voltage (peak value) (See note) 60 V Model Minimum packaging unit Number per tape G3VM-61PR --- G3VM-61PR(TR) 1,500 1. Ask your OMRON representative for orders under 1,500 pcs. 2. Tape-cut USOPs are packaged without humidity resistance. Use manual soldering to mount them. Refer to common precautions. 3. The AC peak and DC value is given for the load voltages. ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-61PR 3.25 2.05 0.15 1.65 (0.4) Note: The actual product is marked differently from the image shown here. 1.27 0.2 2.85 2.2 Note: A tolerance of ±0.2 mm applies to all dimensions unless otherwise specified. (0.35) Weight: 0.03 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-61PR 4 3 932 1 Pin 1 2 The actual product is marked differently from the image shown here. Beveled side is input side. Pin 1 ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-61PR 0.85 2.9 0.8 1.27 G3VM-61PR G3VM-61PR ■ Absolute Maximum Ratings (Ta = 25°C) Item Symbol Rating Unit Measurement Conditions Note: LED forward current IF 50 mA LED forward current reduction rate ∆ IF/°C −0.5 mA/°C LED reverse voltage VR 5 V Connection temperature Tj 125 °C Load voltage (AC peak / DC) VOFF 60 V Continuous load current (AC peak / DC) IO 400 mA ON current reduction rate ∆ IO/°C −4.0 mA/°C Connection temperature Tj 125 °C Dielectric strength between input and output (See note 1.) VI-O 500 Vrms AC for 1 min Ambient operating temperature Ta −40 to +85 °C With no icing or condensation Storage temperature Tstg −40 to +125 °C With no icing or condensation Soldering temperature --- 260 °C 10 s Input Output Ta ≥ 25°C 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Ta ≥ 25°C ■ Electrical Characteristics (Ta = 25°C) Item Input Symbol Minimum Typical Maximum Unit Measurement conditions Note: LED forward voltage VF 1.0 1.15 1.3 V IF = 10 mA Reverse current IR --- --- 10 µA VR = 5 V Capacity between terminals CT --- 15 --- pF V = 0, f = 1 MHz Trigger LED forward current IFT --- 0.5 3 mA IO = 100 mA Maximum resistance with output ON RON --- 1.0 1.5 Ω IF = 5 mA, IO = 400 mA, t<1s Current leakage when the relay is open ILEAK --- --- 1 nA VOFF = 60 V, Ta = 25°C Capacity between terminals COFF --- 20 30 pF V = 0, f = 1 MHz, t<1s Capacity between I/O terminals CI-O --- 0.3 --- pF f = 1 MHz, Vs = 0 V Insulation resistance between I/O terminals RI-O 1,000 --- --- MΩ VI-O = 500 VDC, RoH ≤ 60% Turn-ON time tON --- 0.3 0.5 ms Turn-OFF time tOFF --- 0.3 0.5 ms Output 2. Turn-ON and Turn-OFF Times IF 1 4 2 3 VOUT 10% t ON IF = 5 mA, RL = 200 Ω, VDD = 20 V (See note 2.) Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical VDD --- --- Operating LED forward current IF 5 Continuous load current (AC peak / DC) IO --- Operating temperature Ta −20 --- Maximum Unit 48 V 7.5 20 mA --- 400 mA 65 °C ■ Engineering Data ■ Safety Precautions Load Current vs. Ambient Temperature Refer to “Common Precautions” for all G3VM models. Load current (mA) G3VM-61PR 500 400 300 200 100 0 −20 0 20 40 60 80 100 Ambient temperature (°C) VDD VOUT IF ■ Recommended Operating Conditions Load voltage (AC peak / DC) RL 90% t OFF