OMRON G3VM-81G1

MOS FET Relays
G3VM-81G1
New Relay Incorporating a MOS FET
Optically Coupled with an Infrared LED
Has a 4-pin SOP Package and 80-V Load
Voltage
• Continuous load current of 350 mA.
• Dielectric strength of 1,500 Vrms between I/O.
■ Application Examples
Note:
• Broadband systems
• Measurement devices
The actual product is marked differently from the image
shown here.
• Data loggers
• Amusement machines
■ List of Models
Contact form
SPST-NO
Terminals
Surface-mounting
terminals
Load voltage (peak value)
Model
80 VAC
Number per stick
100
---
G3VM-81G1(TR)
---
2,500
■ Dimensions
Note:
All units are in millimeters unless otherwise indicated.
G3VM-81G1
4.4±0.25
3.9±0.2
2.1 max.
0.15
Note: The actual product is marked differently from
the image shown here.
0.4±0.1
0.6±0.3
0.1±0.1
7.0±0.4
2.54±0.25
Weight: 0.1 g
■ Terminal Arrangement/Internal Connections (Top View)
G3VM-81G1
4
3
1
2
■ Actual Mounting Pad Dimensions (Recommended Value, Top View)
G3VM-81G1
6 to 6.3
1.2
0.8
2.54
62
Number per tape
G3VM-81G1
G3VM-81G1
G3VM-81G1
■ Absolute Maximum Ratings (Ta = 25°C)
Item
Input
Symbol
Rating
Unit
Measurement Conditions
Note:
LED forward current
IF
50
mA
Repetitive peak LED forward
current
IFP
1
A
100 ms pulses, 100 pps
LED forward current reduction
rate
D IF/°C
-0.5
mA/°C
Ta ³ 25°C
LED reverse voltage
VR
5
V
Connection temperature
Tj
125
°C
Output dielectric strength
VOFF
80
V
Continuous load current
IO
350
mA
ON current reduction rate
D ION/°C
-3.5
mA/°C
Connection temperature
Tj
125
°C
Dielectric strength between input and
output (See note 1.)
VI-O
1,500
Vrms
AC for 1 min
Operating temperature
Ta
-40 to +85
°C
With no icing or condensation
Storage temperature
Tstg
-55 to +125 °C
With no icing or condensation
Soldering temperature (10 s)
---
260
Output
°C
1. The dielectric strength between the input and
output was checked by applying voltage between all pins as a group on the LED side and
all pins as a group on the light-receiving side.
Ta ³ 25°C
10 s
■ Electrical Characteristics (Ta = 25°C)
Item
Input
Symbol
Minimum
Typical
Maximum
Unit
Measurement
conditions
Note:
LED forward voltage
VF
1.0
1.15
1.3
V
IF = 10 mA
Reverse current
IR
---
---
10
mA
VR = 5 V
Capacity between terminals
CT
---
15
---
pF
V = 0, f = 1 MHz
IF
Trigger LED forward current
IFT
---
1.0
4.0
mA
IO = 350 mA
Maximum resistance with output ON
RON
---
1.0
1.2
W
IF = 5 mA,
IO = 350 mA
Current leakage when the relay is
open
ILEAK
---
0.2
1.0
nA
VOFF = 30 V, Ta = 50°C
Capacity between I/O terminals
CI-O
---
0.8
---
pF
f = 1 MHz, Vs = 0 V
Insulation resistance
RI-O
1,000
---
---
MW
VI-O = 500 VDC,
RoH £ 60%
Output
Turn-ON time
tON
---
0.3
0.5
ms
Turn-OFF time
tOFF
---
0.3
0.5
ms
2. Turn-ON and Turn-OFF
Times
IF = 5 mA, RL = 200 W,
VDD = 20 V (See note 2.)
1
4
2
3
RL
VDD
VOUT
IF
VOUT
10%
t ON
90%
t OFF
■ Recommended Operating Conditions
Use the G3VM under the following conditions so that the Relay will operate properly.
Item
Symbol
Minimum
Typical
Output dielectric strength
VDD
---
---
Operating LED forward current
IF
5
Continuous load current
IO
---
Operating temperature
Ta
25
---
Maximum
Unit
64
V
---
30
mA
---
350
mA
60
°C
■ Engineering Data
■ Safety Precautions
Load Current vs. Ambient Temperature
Refer to page 6 for precautions common to all G3VM models.
Load current (mA)
G3VM-81G1
500
400
300
200
100
0
−20
0
20
40
60
80
100
Ambient temperature (°C)
63