MOS FET Relays G3VM-352J Slim, 2.1-mm High Relay Incorporating a MOS FET Optically Coupled with an Infrared LED in a Miniature, Flat SOP Package • 2 channels and an 8-pin SOP packageincluded in 350-V load voltage series. • Continuous load current of 110 mA. • Dielectric strength of 1,500 Vrms between I/O. • RoHS Compliant. ■ Application Examples Note: The actual product is marked differently from the image shown here. • Broadband systems • Measurement devices and Data loggers • Amusement machines ■ List of Models Contact form DPST-NO Terminals Surface-mounting terminals Load voltage (peak value) 350 VAC Model Number per stick Number per tape G3VM-352J 50 --- G3VM-352J(TR) --- 2,500 ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-352J 4.4±0.2 2.1 max. 9.4±0.25 0.15 Note: The actual product is marked differently from the image shown here. 0.5±0.3 0.1±0.1 0.4±0.1 2.54 7.0±0.4 Weight: 0.2 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-352J 8 7 6 5 1 2 3 4 ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-352J 6 to 6.3 1.2 0.8 2.54 2.54 MOS FET Relays G3VM-352J 201 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input Symbol Rating Unit Measurement conditions LED forward current IF 50 mA Repetitive peak LED forward current IFP 1 A 100 μs pulses, 100 pps LED forward current reduction rate Δ IF/°C −0.5 mA/°C Ta ≥ 25°C LED reverse voltage VR 5 V Connection temperature Tj 125 °C 350 V 110 mA Output Load voltage (AC peak/DC) VOFF Continuous load current IO ON current reduction rate Δ ION/°C −1.1 Note: mA/°C Ta ≥ 25°C Dielectric strength between input and VI-O output (See note 1.) 1,500 Vrms AC for 1 min Operating temperature Ta −40 to +85 °C With no icing or condensation Storage temperature Tstg −55 to +125 °C With no icing or condensation Soldering temperature (10 s) --- 260 °C 10 s Minimum Typical 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. ■ Electrical Characteristics (Ta = 25°C) Item Symbol Maximum Measurement conditions Unit LED forward voltage VF 1.0 1.15 Reverse current IR --- Capacity between terminals CT --- IFT --- 1 3 mA IO = 110 mA RON --- 25 35 Ω IF = 5 mA, IO = 110 mA, t < 1 s --- 35 50 Ω IF = 5 mA, IO = 110 mA Current leakage when the relay is open ILEAK --- 0.0015 1.0 μA VOFF = 350 V Capacity between terminals COFF --- 30 --- pF V = 0, f = 1MHz Capacity between I/O terminals CI-O --- 0.8 --- pF f = 1 MHz, Vs = 0 V Insulation resistance RI-O 1,000 --- --- MΩ VI-O = 500 VDC, RoH ≤ 60% Turn-ON time tON --- 0.3 1 ms Turn-OFF time tOFF --- 0.1 1 ms IF = 5 mA, RL = 200 Ω, VDD = 20 V (See note 2.) Input Trigger LED forward current Output Maximum resistance with output ON 1.3 V IF = 10 mA --- 10 μA VR = 5 V 30 --- pF V = 0, f = 1 MHz ■ Recommended Operating Conditions Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) VDD --- --- 280 V Operating LED forward current IF 5 10 25 mA Continuous load current (AC peak/DC) IO --- --- 100 mA Operating temperature − 20 --- 65 °C 202 Ta MOS FET Relays G3VM-352J 2. Turn-ON and Turn-OFF Times IF (3) 1 8 (6) (4) 2 7 (5) RL IF Use the G3VM under the following conditions so that the Relay will operate properly. Item Note: VOUT 10% t ON 90% t OFF VDD VOUT ■ Engineering Data LED forward current vs. Ambient temperature Continuous load current vs. Ambient temperature IO - Ta 80 60 40 20 0 20 40 60 80 100 200 160 120 80 40 0 −20 120 Ambient temperature Ta (ഒ) 0 100 0 −100 50 60 80 100 −1 0 1 2 3 40 0.8 1 t<1s 20 0 60 80 100 IO = 110 mA t<1s 4 3 2 1 0 −20 0 Turn ON, Turn OFF time tON, tOFF (μS) tOFF 30 tON 100 LED forward current IF (mA) 300 1000 tON 300 100 tOFF VDD = 20 V RL = 200 Ω IF = 5 mA 30 0 20 40 40 60 80 100 I LEAK - Ta 3000 10 −20 20 Current leakage vs. Ambient temperature tON, tOFF - Ta 100 1.8 Ambient temperature Ta (ഒ) Turn ON, Turn OFF time vs. Ambient temperature 300 30 40 1.6 1.4 5 Ambient temperature Ta (ഒ) Ta = 25°C VDD = 20 V RL = 200 Ω 1000 20 1.2 IFT - Ta IO = 110 mA tON, tOFF - IF 3000 10 1 Trigger LED forward current vs. Ambient temperature 30 0 −20 4 Turn ON, Turn OFF time vs. LED forward current 3 3 LED forward voltage VF (V) Current leakage ILEAK (nA) −2 10 0.1 0.6 120 IF = 5 mA On-state voltage VON (V) Turn ON, Turn OFF time tON, tOFF (μS) 40 10 −3 30 RON - Ta On-state resistance RON (Ω) Continuous load current IO (mA) IO - VON 10 1 20 On-state resistance vs. Ambient temperature Ta = 25°C IF = 5 mA −200 −4 Ta = 25°C Ambient temperature Taഒ Continuous load current vs. On-state voltage 200 100 0.3 Trigger LED forward current I F T (mA) 0 −20 IF - VF 240 LED forward current I F (mA) 100 Continuous load current I O (mA) LED forward current IF (mA) IF - Ta LED forward current vs. LED forward voltage 60 80 100 VOFF = 350 V 30 10 3 1 0.3 100 0.1 −20 Ambient temperature Ta (ഒ MOS FET Relays 0 20 40 60 80 100 Ambient temperature Ta (ഒ) G3VM-352J 203 All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC Global - http://www.omron.com USA - http://www.components.omron.com 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 Cat. No. X302-E-1 MOS FET Relays 12/10 Specifications subject to change without notice G3VM-352J Printed in USA