SPU60 SERIES 60W Desk Top Switching Power Supplies For I.T.E. (Small Size) Description: The SPU60 series of AC/DC switching mode power supplies provide 60 Watts of continuous output power. All supplies are UL 94V-1 min compliant, include IEC-320-C14 input for worldwide applications. All models meet FCC Part-15 class B and CISPR-22 class B emission Limits and are designed to comply with UL/c-UL(UL 1950), ITS/GS(EN 60950) and new CE requirements. All units are 100% burned in and tested. Features: Wide Input Voltage 90 to 264 VAC,47 to 63 Hz IEC-320-C14 Input Inlet Single output Output Voltage Available From 3 VDC Thru 50 VDC Optional Output Connector (See appendix) Input Surge Current, Over Voltage and Over Load protection Splash proof Class I Insulation Safety Approvals : Two Years Warranty C CB US S&E Electrical Characteristics: Sym. Parameter Vin Fin Wo Vo Io Iil Iih Input Voltage Input Frequency Output Power Range Output Voltage Range Output Current Range Input Current (Low Line) Input Current (High Line) Irl Low Line Inrush Current Irh High Line Inrush Current Eff REG-i REG-o OVP OCP Ttr Thold Ts Vrn Ilk Tc Efficiency Line Regulation Load Regulation Over Voltage Protection Over Current Protection Transient Response Hold-Up Time Start Up Time Ripple & Noise (Pe ak to Peak) Safety Ground Leakage Curr ent Temperature Coefficient Test Conditions Operating Voltage Vin=90 to 264VAC Io=Full load, Io=Full load, Io=Full load, Vin=115VAC Io=Full load, Vin=230VAC Io=Full Load, Io=Full Load Vin=230VAC Vin=115VAC Vin=230VAC 25°c, Cool start, Min. Max. Unit 90 264 47 63 0 60 See rating chart See rating chart 1.6 1.0 VAC Hz W V A A A 12 15 A 26 30 A 83 0.5 3 88 1 7 132 150 4 2 2 0.75 0.04 % % % % % mS mS S % mA %/°c Min. Typ. Max. Unit 25°c, Cool start, Vin=230VAC Typ. 70 112 110 Io=Full Load to Half Load, Vin=100VAC Io=Full Load, Vin=110VAC 16 Io=Full Load, Vin=100VAC 0.3 1 Full Load, Vin=90VAC 1 Io=Full Load, Vin=240VAC 0.5 All output -0.04 Environmental : Sym. Parameter Toper Operating Temperature Tstg Storage Temperature Te s t Conditions Hr Relative Humidity Pd Derate linearly from 100% load at 40 C to 50% load at 70 C 0 70 C -40 85 C 5 95 % SPU60 SERIES 60W Desk Top Switching Power Supplies For I.T.E. (Small Size) Safety Specifications: Sym. Vps Vpg Ri Parameter CISPR EMI requirements for CISPR-22 FCC Min. Typ. Max. Unit Primary to secondary 4242 VDC Primary to ground 2121 VDC Te s t Conditions Dielectric Withstanding Voltage for Primary to secondary Dielectric Withstanding Voltage for Primary to Ground Isolation Resistance EMI requirements for FCC PART-15 M Test Voltage=500VDC 50 Vin=220VAC B CLASS Vin=110VAC B CLASS Output Voltage And Current Rating Chart ( Single Output ) : Model Number Output Voltage Output Current Total Regulation Maximum Output Power SPU60-101 03 ~ 05 VDC 6.60 ~ 4.00 A 7% 20W SPU60-102 05 ~ 06 VDC 6.00 ~ 5.00 A 5% 30W SPU60-103 06 ~ 08 VDC 5.83 ~ 4.37 A 5% 35W SPU60-104 08 ~ 11 VDC 5.00 ~ 3.63 A 5% 40W SPU60-105 11 ~ 13 VDC 4.54 ~ 3.84 A 5% 50W SPU60-105-1 11 ~ 13 VDC 5.45 ~ 4.61 A 5% 60W SPU60-106 13 ~ 16 VDC 4.23 ~ 3.43 A 5% 55W SPU60-107 16 ~ 21 VDC 3.75 ~ 2.85 A 5% 60W SPU60-108 21 ~ 27 VDC 2.85 ~ 2.22 A 5% 60W SPU60-109 27 ~ 33 VDC 2.22 ~ 1.81 A 5% 60W SPU60-110 33 ~ 40 VDC 1.81 ~ 1.50 A 3% 60W SPU60-111 40 ~ 50 VDC 1.50 ~ 1.20 A 3% 60W MODEL SPU60-105-1 have only approved UL/c-UL,ITS/GS,CE Mechanical Specifications : Note: 1. Dimensions are shown in mm. 2. Weight: 340gs approx. 3. Optional output connector: See page Appendix.