TOTAL POWER INT'L TPMPU50 SERIES 50W Desk Top Switching Power Supplies For Medical Equipment. Description: The TPMPU50 series of AC/DC switching mode power supplies provide 50 Watts of continuous output power. All supplies are UL 94V-0 compliant, include IEC-320-C14 input for worldwide applications. All models meet FCC Part-15 class B and CISPR -11 EN55011 class B emission Limits and are designed to comply with UL, C-UL, CB and CE requirements. All units are 100% burned in and tested. Features: + Wide Input Voltage 90 to 264 VAC,47 to 63 Hz + IEC-320-C14 Input Inlet + Single to Triple Output + Output Voltage Available From 2VDC Thru 50VDC + Optional Output Connector (See appendix) + Input Surge Current, Over Voltage And Over Load protection Safety Approvals : + Splash proof + Two Year Warranty C Electrical Characteristics: Sym. Parameter Vin Fin Wo Vo Io Iil Iih Input Voltage Input Frequency Output Power Range Output Voltage Range Output Current Range Input Current (Low Line) Input Current (High Line) Irl Low Line Inrush Current Irh High Line Inrush Current Eff US Test Conditions Vin=90 to 264VAC Efficiency Io=Full load, Io=Full load, Io=Full load, Vin=115VAC Io=Full load, Vin=230VAC Io=Full Load, REG-i Line Regulation Io=Full Load REG-o Load Regulation Vin=230VAC Vin=115VAC Vin=230 VAC 25°c, Cool start, Min. Typ. Max. Unit 90 264 47 63 0 50 See rating chart See rating chart 1.35 0.7 VAC Hz W V A A A 12 15 A 26 30 A % 25°c, Cool start, Vin=230VAC CB EN 60601-1 75 83 88 0.5 1 % 3 7 % % OVP Over Voltage Protection 112 132 OCP Over Current Protection 110 150 % Ttr Transient Response Io=Full Load to Half Load, Vin=100VAC 4 mS Thold Hold-Up Time Io=Full Load, Vin=110VAC 16 Ts Start Up Time Io=Full Load, Vin=100VAC 0.3 Vrn Ilk Ripple & Noise (Pea k to Peak) Safety Ground Leakage Current Full Load, Vin=90VAC Io=Full Load, Vin=240VAC Tc Temperature Coefficient All output mS 1.5 2 S 1 2 0.1 % mA 0.04 %/°c Max. Unit 70 85 95 °c °c % Max. Unit -0.04 Environmental : Sym. Toper Tstg Hr Pd Parameter Test Conditions Operating Temperature Storage Temperature Relative Humidity Derate linearly from 100% load at 50°c to 50% load at 70°c Min. Typ. 0 -40 5 Safety Specifications: Sym. Parameter Dielectric Withstanding Voltage for Primary to secondary Dielectric Withstanding Voltage Vpg for Primary to ground Ri Isolation Resistance CISPR EMI requirements for CISPR-11 FCC EMI requirements for FCC PART-15 Vps Test Conditions Min. Typ. Primary to secondary 5656 VDC Primary to ground 2121 VDC 50 B B MW CLASS CLASS Test Voltage = 500VDC Vin=220VAC Vin=110VAC TOTAL POWER, INT. Tel: 877-646-0900 Fax: 978-453-7395 Email: [email protected] http://www.total-power.com -1- TPMPU50 SERIES 50W Desk Top Switching Power Supplies For Medical Equipment. Output Voltage And Current Rating Chart (Single Output) : Model Number Output Voltage TPMPU50-100 TPMPU50-101 TPMPU50-102 TPMPU50-103 TPMPU50-104 TPMPU50-105 TPMPU50-106 TPMPU50-107 TPMPU50-108 TPMPU50-109 TPMPU50-110 TPMPU50-111 02 03 05 06 08 11 13 16 21 27 33 40 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 03 05 06 08 11 13 16 21 27 33 40 50 VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC Output Current 12.0 10.0 8.00 7.00 5.63 4.00 3.46 3.12 2.30 1.85 1.51 1.25 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 10.0 8.00 6.66 5.25 4.00 3.46 2.81 2.38 1.85 1.51 1.25 1.00 Total Regulation A A A A A A A A A A A A Maximum Output Power 7% 5% 5% 5% 4% 3% 3% 3% 2% 2% 2% 2% 30W 40W 40W 42W 45W 45W 45W 50W 50W 50W 50W 50W Output Voltage And Current Rating Chart ( Multi Output ) : Model Number Output #1 Output #2 Output #3 Maximum Vonom Iomin Iomax Regmax Vonom Iomin Iomax Regmax Vonom Iomin Iomax Regmax Output Power TPMPU50-200 +3.3V 0.5A TPMPU50-201 +5V 0.5A TPMPU50-202 +5V 0.5A TPMPU50-203 +5V 0.5A TPMPU50-204 +3.3V 1.0A TPMPU50-209 +12V 0.5A TPMPU50-210 +15V 0.5A TPMPU50-215 +5V 0.5A TPMPU50-216 +5.1V 0.5A TPMPU50-217 +10.5V 0.2A TPMPU50-218 +5V 0.2A TPMPU50-300 +3.3V 0.5A TPMPU50-301 +5V 0.5A TPMPU50-302 +5V 0.5A TPMPU50-303 +5V 0.5A TPMPU50-304 +5V 0.5A TPMPU50-305 +5V 0.5A TPMPU50-306 +3.3V 0.5A 5A 5A 5A 5A 5A 3A 2A 5A 5A 2A 5A 5A 5A 5A 5A 5A 5A 5A 7% +12V 0.2A 2A 5% +12V 0.2A 2A 5% +15V 0.2A 1.5A 5% +24V 0.1A 1A 7% +5V 0.4A 2A 5% -12V 0.2A 1A 5% -15V 0.2A 1A 5% -24V 0.1A 1A 5% +7.2V 0.2A 2.6A 5% -10.5V 0.2A 2A 5% -5V 0.2A 2A 7% +12V 0.2A 2A 5% +12V 0.2A 2A 5% +12V 0.2A 2A 5% +15V 0.2A 2A 5% +24V 0.1A 1A 5% +24V 0.1A 1A 7% +12V 0.2A 2A Mechanical Specifications: 5% 5% 6% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 6% 5% 5% 5% -12V -5V -12V -15V -24V -12V -5V 0A 0A 0A 0A 0A 0A 0A 0.8A 0.8A 0.8A 0.8A 0.5A 0.8A 0.8A 5% 5% 5% 5% 5% 5% 5% 40W 42W 42W 42W 26.5W 42W 42W 42W 42W 42W 35W 42W 42W 42W 42W 42W 42W 42W Note: 1. Dimensions are shown in mm. 2. Weight: 400-550gs approx. 3. Optional output connector: See page Appendix. TOTAL POWER, INT. Tel: 877-646-0900 Fax: 978-453-7395 Email: [email protected] http://www.total-power.com -2-