SPU50 SERIES 60W Desk Top Switching Power Supplies For I.T.E. Description: The SPU50 series of AC/DC switching mode power supplies provide 60 Watts of continuous output power. All supplies are UL 94V-0 compliant, include IEC-320-C14 input for worldwide applications. All models meet FCC Part-15 class B and CISPR-22 class B emission Limits and are designed to comply with UL, C-UL, TUV and CE requirements. All units are 100% burned in and tested. Features: Wide Input Voltage 90 to 264 VAC,47 to 63 Hz IEC-320-C14 Input Inlet Output Voltage Available From 5VDC Thru 50VDC Optional Output Connector (See appendix) Input Surge Current, Over Voltage And Over Load protection Single Output Splash proof Class I Insulation Two years warranty Safety Approvals : CB Electrical Characteristics: Sym. Parameter Test Conditions Min. Typ. Max. Unit Vin Input Voltage 90 264 VAC Fin Input Frequency 47 63 Hz Wo Output Power Range 0 60 W Vo Output Voltage Range See rating chart V Io Output Current Range See rating chart A Iil Input Current (Low Line) Io=Full load, Vin=115VAC 1.6 A Iih Input Current (High Line) Io=Full load, Vin=230 VAC 1.0 A Irl Low Line Inrush Current 12 15 A Irh High Line Inrush Current 26 30 A Eff Efficiency Io=Full load, 25°c, Cool start, Vin=115VAC Io=Full load, 25°c, Cool start, Vin=230VAC Io=Full Load, Vin=230VAC 83 88 % 0.5 1 % Vin=90 to 264VAC REG-i Line Regulation Io=Full Load REG-o Load Regulation Vin=230VAC 75 5 % OVP Over Voltage Protection 112 132 % OCP Over Current Protection 110 150 % Ttr Transient Response 4 mS Thold Hold-Up Time 3 Io=Full Load to Half Load,Vin=100VAC Io=Full Load, Vin=100VAC 16 0.3 Ts Start Up Time Io=Full Load, Vin=100VAC Vrn Ripple & Noise (Pe ak to Peak) Full Load, Vin=90VAC Ilk Safety Ground Leakage Current Io=Full Load, Vin=240VAC Tc Temperature Coefficient All output mS 1 2 S 0.5 1 % 0.5 0.75 mA 0.04 %/°c Max. Unit 0 70 °c -40 85 °c 5 95 % -0.04 Environmental : Sym. Parameter Toper Operating Temperature Tstg Storage Temperature Test Conditions Hr Relative Humidity Pd Derate linearly from 100% load at 40°c to 50% load at 70°c Min. Typ. SPU50 SERIES 60W Desk Top Switching Power Supplies For I.T.E. Safety Specifications: Sym. Vps Vpg Ri Parameter Dielectric Withstanding Voltage for Primary to secondary Dielectric Withstanding Voltage for Primary to ground Isolation Resistance CISPR EMI requirements for CISPR-22 FCC EMI requirements for FCC PART-15 Test Conditions Min. Typ. Max. Unit Primary to secondary 4242 VDC Primary to ground 2121 VDC Test Voltage = 500VDC 50 MW Vin=220VAC B CLASS Vin=110VAC B CLASS Output Voltage And Current Rating Chart ( Single Output ) : Model Number Output Voltage Output Current Total Regulation Maximum Output Power SPU50-1 05 ~ 06 VDC 10.0 ~ 8.30 A 5% 50W SPU50-1-1 06 ~ 09 VDC 9.10 ~ 6.11 A 5% 55W SPU50-2 09 ~ 11 VDC 6.50 ~ 5.31 A 5% 58.5W SPU50-3 11 ~ 13 VDC 5.45 ~ 4.61 A 5% 60W SPU50-4 13 ~ 16 VDC 4.61 ~ 3.75 A 5% 60W SPU50-5 16 ~ 21 VDC 3.75 ~ 2.86 A 5% 60W SPU50-6 21 ~ 27 VDC 2.86 ~ 2.22 A 5% 60W SPU50-7 27 ~ 33 VDC 2.22 ~ 1.82 A 5% 60W SPU50-8 33 ~ 40 VDC 1.82 ~ 1.50 A 5% 60W SPU50-9 40 ~ 50 VDC 1.50 ~ 1.20 A 5% 60W Mechanical Specifications : Note: 1. Dimensions are shown in mm. 2. Weight: 520gs approx. 3. Optional output connector: See page Appendix.