Indoor Selectable- Output Strobes and Horn

Indoor SelectableOutput Strobes and
Horn Strobes for Ceiling Applications
SpectrAlert® Advance audible visible notification products
are rich with features guaranteed to cut installation times
and maximize profits.
Features
• Plug-in design with minimal intrusion into the back box
• Tamper-resistant construction
• A
utomatic selection of 12- or 24-volt operation at 15 and 15/75 candela
• F
ield-selectable candela settings on ceiling units: 15, 15/75, 30,
75, 95, 110, 115, 135, 150, 177, and 185
• Horn rated at 88+ dBA at 16 volts
• Rotary switch for horn tone and three volume selections
• Universal mounting plate for ceiling units
• M
ounting plate shorting spring feature checks wiring continuity
before device installation
• Electrically Compatible with legacy SpectrAlert devices
• Compatible with MDL3 sync module
• Listed for ceiling or wall mounting
3023572
Like the entire SpectrAlert Advance product line, ceiling-mount
strobes and horn strobes include a variety of features that increase
their application versatility while simplifying installation. All devices
feature a plug-in design with minimal intrusion into the back box,
making installations fast and foolproof while virtually eliminating
costly and time-consuming ground faults.
To further simplify installation, SpectrAlert Advance utilizes a
universal mounting plate so you can mount them to a wide array
of back boxes. With an onboard shorting spring, installers can test
wiring continuity before the device is installed.
Installers can also easily adapt devices to a suit a wide range of
application requirements using field-selectable candela settings,
automatic selection of 12- or 24-volt operation, and a rotary switch
for horn tones with three volume selections.
Agency Listings
S4011 (chimes, horn strobes, horns)
S5512 (strobes)
The SpectrAlert Advance series offers the most versatile and
easy-to-use line of horns, strobes, and horn strobes in the industry.
With white and red plastic housings, wall and ceiling mounting
options, and plain and FIRE-printed devices, SpectrAlert Advance
can meet virtually any application requirement.
MEA452-05-E
7125-1653:0186 (indoor strobes)
7125-1653:0188 (horn strobes,
chime strobes)
7135-1653:0189 (horns, chimes)
SpectrAlert Advance Specifications
Architect/Engineer Specifications
General
SpectrAlert Advance strobes and horn strobes shall mount to a standard 4 × 4 × 1½-inch back box, 4-inch octagon back box, or doublegang back box. Two-wire products shall also mount to a single-gang 2 × 4 × 17⁄8-inch back box. A universal mounting plate shall be used for
mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, SpectrAlert
Advance products, when used with the Sync•Circuit™ Module accessory, shall be powered from a non-coded notification appliance circuit
output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt-rated notification appliance circuit
outputs shall operate between 8.5 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between 16.5 and 33
volts. Indoor SpectrAlert Advance products shall operate between 32 and 120 degrees Fahrenheit from a regulated DC or full-wave rectified
unfiltered power supply. Strobes and horn strobes shall have field-selectable candela settings including 15, 15/75, 30, 75, 95, 110, 115, 135,
150, 177, and 185.
Strobe
The strobe shall be a System Sensor SpectrAlert Advance Model _______ listed to UL 1971 and shall be approved for fire protective service.
The strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for
visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash
tube and associated lens/reflector system.
Horn Strobe Combination
The horn strobe shall be a System Sensor SpectrAlert Advance Model _______ listed to UL 1971 and UL 464 and shall be approved for
fire protective service. The horn strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with
Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light
shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have three audibility options and an option to switch
between a temporal three pattern and a non-temporal (continuous) pattern. These options are set by a multiple position switch. On four-wire
products, the strobe shall be powered independently of the sounder. The horn on horn strobe models shall operate on a coded or non-coded
power supply.
Synchronization Module
The module shall be a System Sensor Sync•Circuit model MDL3 listed to UL 464 and shall be approved for fire protective service. The module
shall synchronize SpectrAlert strobes at 1 Hz and horns at temporal three. Also, while operating the strobes, the module shall silence the horns
on horn strobe models over a single pair of wires. The module shall mount to a 4 11⁄16 × 4 11⁄16 × 2 1⁄8-inch back box. The module shall also
control two Style Y (class B) circuits or one Style Z (class A) circuit. The module shall synchronize multiple zones. Daisy chaining two or more
synchronization modules together will synchronize all the zones they control. The module shall not operate on a coded power supply.
Physical/Electrical Specifications
Standard Operating Temperature
32°F to 120°F (0°C to 49°C)
Humidity Range
10 to 93% non-condensing
Strobe Flash Rate
1 flash per second
Nominal Voltage
Regulated 12 DC/FWR or regulated 24 DC/FWR1
Operating Voltage Range2
8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal)
Operating Voltage Range (MDL3)
8.5 to 17.5V (12 V nominal) or 16.5 to 33 V (24V nominal)
Input Terminal Wire Gauge
12 to 18 AWG
Ceiling-Mount Dimensions (including lens)
6.8" diameter × 2.5" high (173 mm diameter × 64 mm high)
Ceiling-Mount Surface Mount Back Box Skirt Dimensions
6.9" diameter x 3.4" high (175 mm diameter x 86 mm high)
(SBBCR, SBBCW)
Notes:
1. Full Wave Rectified (FWR) voltage is a non-regulated, time-varying power source that is used on some power supply and panel outputs.
2. P, S, PC, and SC products will operate at 12 V nominal only for 15 and 15/75 cd.
AVDS10101
UL Current Draw Data
UL Max. Strobe Current Draw (mA RMS)
Standard Candela Range
High
Candela Range
8–17.5 Volts
DC
123
142
NA
NA
NA
NA
NA
NA
NA
NA
NA
Candela
15
15/75
30
75
95
110
115
135
150
177
185
16–33 Volts
DC
66
77
94
158
181
202
210
228
246
281
286
FWR
128
148
NA
NA
NA
NA
NA
NA
NA
NA
NA
UL Max. Current Draw (mA RMS), 2-Wire Horn Strobe, Standard Candela Range (15–115 cd)
8–17.5 Volts
16–33 Volts
DC Input
15
15/75
15
15/75
30
75
Temporal High
137
147
79
90
107
176
Temporal Medium
132
144
69
80
97
157
Temporal Low
132
143
66
77
93
154
Non-Temporal High
141
152
91
100
116
176
Non-Temporal Medium
133
145
75
85
102
163
Non-Temporal Low
131
144
68
79
96
156
FWR Input
Temporal High
136
155
88
97
112
168
Temporal Medium
129
152
78
88
103
160
Temporal Low
129
151
76
86
101
160
Non-Temporal High
142
161
103
112
126
181
Non-Temporal Medium
134
155
85
95
110
166
Non-Temporal Low
132
154
80
90
105
161
UL Max. Current Draw (mA RMS), 2-Wire Horn Strobe, High Candela Range (135–185 cd)
16–33 Volts
DC Input
135
150
177
185
FWR Input
Temporal High
245
259
290
297
Temporal High
Temporal Medium
235
253
288
297
Temporal Medium
Temporal Low
232
251
282
292
Temporal Low
Non-Temporal High
255
270
303
309
Non-Temporal High
Non-Temporal Medium
242
259
293
299
Non-Temporal Medium
Non-Temporal Low
238
254
291
295
Non-Temporal Low
FWR
71
81
96
153
176
195
205
207
220
251
258
95
194
182
179
201
187
182
110
212
201
198
221
207
201
115
218
210
207
229
216
210
190
184
184
203
189
184
210
202
194
221
208
202
218
206
201
229
216
211
16–33 Volts
135
150
215
231
209
224
207
221
233
248
219
232
214
229
177
258
250
248
275
262
256
185
265
258
256
281
267
262
Horn Strobe Tones and Sound Output Data
Horn Strobe Output (dBA)
Switch
Position
1
2
3
4
5
6
7†
8†
9†
Sound Pattern
Temporal
Temporal
Temporal
Non-Temporal
Non-Temporal
Non-Temporal
Coded
Coded
Coded
dB
High
Medium
Low
High
Medium
Low
High
Medium
Low
8–17.5
Volts
DC
78
74
71
82
78
75
82
78
75
FWR
78
74
73
82
78
75
82
78
75
16–33
Volts
DC
84
80
76
88
85
81
88
85
81
FWR
84
80
76
88
85
81
88
85
81
24-Volt Nominal
Reverberant
DC
FWR
88
88
86
86
83
80
93
92
90
90
88
84
93
92
90
90
88
85
Anechoic
DC
99
96
94
100
98
96
101
97
96
FWR
98
96
89
100
98
92
101
98
92
Settings 7, 8, and 9 are not available on 2-wire horn strobes.
†
AVDS10101
5.703"
SpectrAlert Advance Dimensions
6.922"
dia.
6.8"
Dia.
5"
2.5"
2.5"
Ceiling-mount horn strobes
Ceiling back box surface mount back box
SpectrAlert Advance Ordering Information
Model
Description
Ceiling Horn Strobes
PC2R
2-Wire Horn Strobe, Standard cd, Red
PC2R-P
2-Wire Horn Strobe, Standard cd, Red, Plain
(no “FIRE”) marking
PC2RH
2-Wire Horn Strobe, High cd, Red
PC2W
2-Wire Horn Strobe, Standard cd, White
PC2W-P
2-Wire Horn Strobe, Standard cd, White, Plain
(no “FIRE”) marking
PC2W-SP
2-Wire Horn Strobe, Standard cd, White, “Fuego”
marking
PC2WH
2-Wire Horn Strobe, High cd, White
PC2WH-P 2-Wire Horn Strobe, High cd, White, Plain
(no “FIRE”) marking
PC2WH-SP 2-Wire Horn Strobe, High cd, White, “Fuego”
PC4R
4-Wire Horn Strobe, Standard cd, Red
PC4RH
4-Wire Horn Strobe, High cd, Red
PC4W
4-Wire Horn Strobe, Standard cd, White
Model
Description
Ceiling Strobes
SCR
Strobe, Standard cd, Red
SCRH
Strobe, High cd, Red
SCW
Strobe, Standard cd, White
SCW-P
Strobe, Standard cd, White, Plain (no “Fire”) marking
SCWH
Strobe, High cd, White
Accessories
SBBCR
Surface Mount Back Box, Ceiling, Red
SBBCW
Surface Mount Back Box, Ceiling, White
Notes:
All -P models have a plain housing (no “FIRE” marking on cover)
All -SP models have “FUEGO” marking on cover
“Standard cd” refers to strobes that include 15, 15/75, 30, 75, 95, 110, and 115 candela settings. “High cd” refers to strobes that include 135, 150, 177, and 185
candela settings.
3825 Ohio Avenue • St. Charles, IL 60174
Phone: 800-SENSOR2 • Fax: 630-377-6495
©2015 System Sensor.
Product specifications subject to change without notice. Visit systemsensor.com
for current product information, including the latest version of this data sheet.
AVDS10102 • 03/15