repot01-10 - Recom International Power Gmbh

Features
• suitable for 1-10V dimmable LED drivers
• with pressure two-way switch and thermal link
LED
Dimmer
D I M M E R
REPOT
Description
The new REPOT01-10 is an electronic Potentiometer which is the perfect complement to our upcoming
LED drivers RACD45-A, RACD60-A, RACD100-A and RACD150-A. It is also possible to power any LED
Driver that offers a 1-10V dimming input because it works as a current sink and not as an ordinary
potentiometer. The REPOT includes an adjustable minimum dimming level and a switch contact to turn
off the driver completely. The warranty is 5 years.
Electronic
Potentiometer
5Y
EAR
5
wa
rranty
Selection Guide
Part
Number
Input
Dim Control
Dim Control
Voltage Range
Current
Voltage
(VAC) (mA)(VDC)
REPOT1-10198-264 40 1-10
Specifications (measured at TA= 25°C, nominal input voltage, rated load)
PROTECTION
Parameter
Type
Value
Input Fuse (1)
0.8A, slow blow
Notes:
Note1:
Each dimmer contains a spare fuse inside the white protective cover.
ENVIRONMENTAL
Parameter
Condition
Value
Operating Temperature Range
max. Case Temperature Range
with derating
-10°C to +80C, Ambient
80°C max.
Derating Graph
EN60669-1 compliant
EN60669-2-1 compliant
Output Power (%)
100
80
60
40
20
0
-20
0
20
40
35
60
80
100
Ambient Temperature (°C)
SAFETY AND CERTIFICATIONS
Certificate Type (compliant)
Standard
Switches for household and similar fixed-electrical installations - General requirements
Switches for household and similar fixed electrical installations - Particular requirements
EN-60669-1:2008
EN-60669-2-1:2010
Refer to Applications Notes
www.recom-power.com
REV.: 0/2015
L-1
REPOT
AC/DC Converter
Series
Specifications (measured at TA= 25°C, nominal input voltage, rated load)
DIMENSIONS and PHYSICAL CHARACTERISTICS
Parameter
Type
Value
Case Material
Metal
Dimensions (LxWxH)
71.0 x 71.0 x 35mm
Weight
70g
Input
Output
Connection
Screw Terinal (1.5-2.5mm²)
Screw Terinal (1.5-2.5mm²)
Mechanical Dimensions
Top View
Bottom View
71.0
35.5
3.5 max.
35.5
22.00
Electronic Potentiometer
REPOT01-10
49.20
13.0
71.0
Ø3.5 max.
M3
3.50
30.00
Fuse
F0.8AH250V
10
250~
21.0
53.50
29.0
60.00
cable input
4.0
Adapter to 6mm
cut
27.20
3.0
13.2
1.0
cable input
53.50
Tolerance: ±0.5mm
L-2
REV.: 0/2015
www.recom-power.com
REPOT
DC/DC Converter
Series
Specifications (measured at TA= 25°C, nominal input voltage, rated load)
INSTALLATION
N
L
N
+
LED driver
L
+ -
max. 10 LED drivers
Notes:
Note2: Note3: To set the basic brightness, set the actuating button to the left stop minimum brightness). Now use a screw driver to set the desired basic brightness on the potentiometer. Persuant to EN60699-2-1 the basic value should be set in such a way that the light visibly glows over the entire load range (at nominal voltage -10%) when it’s set to dark position.
Dimmer designed for RACT20.
PACKAGING INFORMATION
Parameter
Packaging Dimension (LxWxH)
Type
Cardboard Box
Packaging Quantity
Value
73 x 73 x 53mm
1 pcs
The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written
consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer
shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.
www.recom-power.com
REV.: 0/2015
L-3