Features • suitable for energy-saving lamps, dimmable LED lamps / drivers and low voltage halogen lamps with magnetic transformers D I M M E R • with pressure two-way switch and thermal link Dimmer REDIM • Overtemperature protected Description The REDIM series offer dimmers that reliably operate with base loads from 7W. These dimmers and the RACT20 series LED drivers are ideally matched and provide a smooth dimming curve and deep dimming down to zero. The basic light level can be adjusted individually and easily for a customized lighting solution. The warranty is 5 years. Leadingedge Dimmer 5Y EAR 5 wa rranty Selection Guide Part Number Input Output Voltage Range Power (VAC)(W/VA) REDIM07 198-2647-110 REDIM20 198-26420-250 Specifications (measured at TA= 25°C, nominal input voltage, rated load) PROTECTION Parameter Type Value Over Temperature Protection (OTP) 115°C, thermal shutdown Input Fuse (1) REDIM07 REDIM20 Notes: Note1: 1A, slow blow 2A, slow blow Each dimmer contains a spare fuse inside the black protective cover. ENVIRONMENTAL Parameter Condition Value Operating Temperature Range max. Case Temperature Range with derating -20°C to +80C, Ambient 80°C max. Derating Graph EN60669-1 compliant EN60669-2-1 compliant Output Power (%) 100 80 60 40 20 0 -20 0 20 40 35 60 80 100 Ambient Temperature (°C) SAFETY AND CERTIFICATIONS Certificate Type (compliant) Standard Switches for household and similar fixed-electrical installations - General requirements Switches for household and similar fixed electrical installations - Particular requirements EN-60669-1:2008 EN-60669-2-1:2010 Refer to Applications Notes www.recom-power.com REV.: 0/2015 L-1 REDIM AC/DC Converter Series Specifications (measured at TA= 25°C, nominal input voltage, rated load) DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter Type Value Case Material Plastic Dimensions (LxWxH) 71.0 x 71.0 x 35mm Weight 70g Input Output Connection Screw Terinal (1.5-2.5mm²) Screw Terinal (1.5-2.5mm²) Mechanical Dimensions TOP VIEW BOTTOM VIEW 71.0 35.5 23.50 35.5 22.00 Phase Angler Dimmer (LE) REDIM07 Minimum Brightness 230V~ 50Hz 7-110 W/VA 3.5 max. 49.20 13.0 71.0 M3 Fuse T1AH/250V 30.00 M3 R,L 53.5 60.00 cable input 4.0 Adapter to Ø6mm cut cable input 27.20 Ø3.0 13.2 1.0 53.5 Tolerance: ±0.5mm L-2 REV.: 0/2015 www.recom-power.com REDIM AC/DC Converter Series Specifications (measured at TA= 25°C, nominal input voltage, rated load) INSTALLATION L N RACT20 N Phase angle L dimmed LED driver REDIM07 - max. 5x RACT20 RECIM20 - max. 12x RACT20 Notes: Note2: Note3: To set the basic brightness, set the actuating button to the left stop minimum brightness). Now use a screw driver to set the desired basic brightness on the potentiometer. Persuant to EN60699-2-1 the basic value should be set in such a way that the light visibly glows over the entire load range (at nominal voltage -10%) when it’s set to dark position. Dimmer designed for RACT20. PACKAGING INFORMATION Parameter Packaging Dimension (LxWxH) Type Cardboard Box Packaging Quantity Value 73 x 73 x 53mm 1 pcs The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 0/2015 L-3